Question about 1993 Chevrolet K1500

1 Answer

Transmission slips in second gear 1993w/tchevypu1500

All other gears shift fine,just bought because it is a chevy, someone told me it could be the governor if so does anyone know where this might be located

Posted by on

  • Richard Scordino May 11, 2010

    Governor is on the mainshaft inside the unit. Likely it's not that. Have pressure tests done by a good reliable trans shop.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 355 Answers

Well if it was me i would pull the pan and see how much metal is in pan and clutch meteral you find in there and brake open filter to see whats in it if you find lots of metal its not govener making slip any way don't throw parts at it open it and see what you find first it may be trans going down

Posted on Sep 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my 1999 Chevy Blazer shift really hard into second gear without the RPM's increasing like the tranny's slipping?


Shifting hard broken modulator valve on the trany itself normally there a vacuum line connected to it

Mar 13, 2015 | 1999 Chevrolet Blazer

1 Answer

My 2001 Chevy Silverado 1500 2WHLDR 5.3L transmission slips from 2500 rpm's in second gear and will not shift into 3rd


Is there anyway you can pull a code? Because it can be solenoid related,for this type of transmission the speed sensor (VSS) is prone to do this,also how is the transmission fluid is it brownish or dark dark burnt , because if it is its a mechanical failure.I can pull a code if in T.O

Feb 23, 2013 | 2001 Chevrolet Silverado

1 Answer

Hi, I own a 1999 Chevy Blazer. The guy I bought it from said it has ****** problems. When I shift it through the gears it clicks like it is going into gear. I can drive it down the road but I cannot d


Check your shift cable it may be stretched or broken.Located on drivers side of tranamission.Have someone else shift thru the gears while someone looks at the shift lever on the side of the transmission to see if it shifts into and out of all of the gears.If it shifts in and out of all the gears then the cable is good and you have a internal problem.If it does'nt shift in and out of all gears then replace the shift cable.

Dec 04, 2011 | Cars & Trucks

2 Answers

Ford trauras trouble code 732 - was told transmission code 732 was being produced, what does a code 732 say?


P0732 FORD - Incorrect Second Gear Ratio
Transmission in second gear and the ECM detected an incorrect gear ration. This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows:

Torque converter slip ratio = A x C/B

A: Output shaft revolution signal from revolution sensor
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes

If the actual gear position is higher than the position (2nd) supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Incorrect transmission shifting

Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

Tech notes
Start by inspecting the transmission fluid level and condition, and change fluid if necessary.


Hope helps.

Apr 26, 2011 | Ford Taurus X Cars & Trucks

1 Answer

My transmission slips going through second gear if i get my foot in it just a little bit, and it doesnt always go into reverse. if i shift into reverse and it doesnt shift, i have to shift to neutral then...


this problem is a common failure associated with your shift solenoinds inside your tranny. of course a shop is not gonna tell you this because by the time you wanna get it repaired it is usually too late and have already cause damage to your clutch pack and internal parts, thats the main reason why a shop wont mess with just replacing your shift solenoid (aka valve bodie)

Feb 18, 2010 | 2000 Chevrolet Silverado 1500

1 Answer

1995 chevy blazer transmission will not let truck shift out of second when in drive


Normally while driving in overdrive (4th gear) you will feel it start slipping and finally slide into third gear. Then 3rd gear slips out into second, and you will never see 3rd or 4th gear again. I'm guessing this was the problem? If so its time for an overhaul

Dec 22, 2009 | 1995 Chevrolet Blazer

1 Answer

1998 Honda Accord Transmission Problem


these models are known for transmission failure...check carcomplaints.com. As for the slipping, your transmission will need replacement or need to be rebuilt. This will cost you around $1000-$3500, very costly!! Hopefully this helps

Jul 30, 2009 | 1998 Honda Accord

3 Answers

Transmission won't shift from 1st to 2nd gear on it's own


Have someone scan the transmission for bad shift sensors.

Mar 13, 2009 | 1999 Dodge Ram

2 Answers

Transmission problem


im sorry to say no it will not.

Mar 02, 2009 | 1988 Chevrolet Astro Cargo

1 Answer

1990 ford 5.8l automatic transmission seems to shift funny


could be a faulty solenoid, scan the TCM for faults and drop the sump for contamination

Feb 07, 2009 | 1990 Ford F150

Not finding what you are looking for?
1993 Chevrolet K1500 Logo

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...