Question about 1997 Dodge Ram 1500 Club Cab

1 Answer

1997 turned headlights on and had no lights low or high beam

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

If I'm correct, that year range had sealed beam headlights. Either way, first thing I would check would be the fuses. A blown fuse explains no hi or lo beams pretty well. After ruling out any fuse issues, check the bulbs to see if they are blown - not likely both would go at same time but not impossible. Fuses fine and bulbs fine, issue has to be somewhere in wiring harness. That is the worst case scenario since you'll need a multi-meter and a ton of time.

Posted on Sep 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

While low beams on the left high beams stays on dim light but wen I turn high beams on they work fine


It could be driving lights mode instead of low beam. Check connections.

Jun 16, 2017 | Cars & Trucks

1 Answer

I have a 1997 Chevy s10 I upgraded the headlights to h4 4656 the plug they sent with the headlights have red green and black wires and wires do I splice to the tan wire the light green wire and blue wire...


The black should be the ground, the other two are for low and high beam. Turn on lights and touch the wires to socket wires with low beam on. Then switch to high beam and touch remaining wire. Now if both are wired in and they function properly you all set to connect with crimp connectors. If not reverse the green and blue so high and low beams have the proper connection.

Dec 13, 2014 | 1997 Chevrolet S-10 Pickup

3 Answers

One low beam head lights will not work, high beam works though


check for a damaged wire for the low beam. Also wouldn't hurt to check the ground wire as the high beam will try and ground through the low beam but not visa verse

Dec 29, 2013 | 1997 Chevrolet Blazer

1 Answer

One low beam wont turn on, but both high beams will


ok if you run a power wire to the positive on battery does it go?
if so its a plug or cable issue. if not make an earth wire for the earth side of light and try the power again. if it goes you have a bad earth.

Dec 29, 2013 | 1997 Chevrolet Blazer

1 Answer

1987 Chrysler Fifth Avenue, only one low beam headlight is on.


the light is out replace it the low side work when u have high beams on ththe short in the light is in the low beam .

Sep 09, 2012 | 1987 Chrysler Fifth Avenue

2 Answers

Headlights or brights will not turn on. Running lights turn on. Fuse and relay are both fine.


I looked in the Honda technical manual wiring diagrams and I don't think there is a separate relay for the low beam headlights. The headlight switch itself is located right above the steering column where the headlight stalk is attached - controls parking lights, high beams and low beams. It could be that a relay is integrated within this switch,

Dec 07, 2010 | 1997 Honda Civic

2 Answers

Hi I have a 1997 for f150 I have no high or low head lights


check the fuses first, no luck replace the day time running light module.

Jan 27, 2010 | 1997 Ford F150 Regular Cab

1 Answer

Headlights wont work


Fuse 22 and fuse 23 are left and right low beam headlamp fuses located in the PDC. 23 and 24 are high beam fuses. There is also a low beam and a high beam relay in PDC as well. If no headlights work I would check for main switch or multifuction switch (wiper/high beam) since each light has its own fuse and relay.

Jun 05, 2009 | 1997 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...