Question about 1998 Chrysler Sebring

Open Question

Blinkers and hazard lights dont work on a 1998 chrysler sebring.checked fuses and relays and they are good

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Acura 1998 RL blinkers and hazards not working? Replaced Blinker hazard unit under dashboard in fuse box. Still no blinkers and hazards. All other lights work fine.


Have you checked to see if your fuses are good ? If they are, you may want to check power at the switch and then at the relay. Might have a pinched wiring somewhere.

Dec 23, 2016 | 1998 Acura RL

1 Answer

2001 4 Runner blinker problem


The hazards use a separate relay. listen for signal relay clicking to locate the correct relay. Consult your owners manual for fuse and relay layout.

May 26, 2017 | Toyota 4Runner Cars & Trucks

2 Answers

Chrysler Vision hazard light


on some of these models, the hazard switch operates through its own flasher fuse. if this is the case, locating and replacing the fuse ($4) should do it. Location should be in the owners manual.

Nov 10, 2013 | 1997 Chrysler LHS

1 Answer

The blinkers dont work


Assuming that you've checked the regular fuses, have you checked the relay for the blinkers? If not, one way to do so is the switch the relay for the hazard lights with the relay for the blinkers and see if that solves the problem. If it does, replace the relay so you have both blinkers and hazard lights.

Feb 26, 2012 | 1999 Cadillac DeVille

1 Answer

My 1998 le sabre blinker (left and right) dose not work but the fuse is good and it worked last night


check your hazard lights if they work then the switch needs to be checked if hazards dont work then replace turn and hazard relay unit under d/s dash

Jan 15, 2011 | 1998 Buick LeSabre

1 Answer

Turn signals will not work


this happened to my car too. the turn signals and the hazards werent working so i replaced the relay and that fixed the whole problem

Jul 29, 2009 | 1998 Chrysler Sebring

3 Answers

Blinker stopped working, but the hazard lights still work - I think it's a blown fuse but how and where do I fix the fuse


There is 2 different flashers. One flasher for the turn signals and one flasher for the hazards. If you turn on the turn signals and the turn indicator on the dash lights up but doesn't blink, then most likely it is the turn signal flasher that is bad. Good luck.

May 29, 2009 | 1998 Chrysler Sebring

1 Answer

My 2002 Chrysler Sebring blinkers and hazards lights wont work


change the flasher relay... under the dash either on the fuse panel or as a stand alone... it's slight larger then the other relays there.


Dec 18, 2008 | 2002 Chrysler Sebring

1 Answer

Turn signals and hazard flashers quit working


it is a simple problem....just replace the hazard switch and everything will be back to normal

Nov 02, 2008 | 2006 Chrysler Sebring

Not finding what you are looking for?
1998 Chrysler Sebring Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...