Question about 1992 Isuzu Rodeo

Open Question

How to install distributor on 1992 Isuzu Rodeo?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Richie_asg1
  • 1036 Answers

SOURCE: 1992 Isuzu Rodeo Distributor wires

Hi,

On the 3.2L distriburorless ignition, the firing order is a straight 1-2-3-4-5-6.

Cylinder numbering .

88c39f7.jpg-

Hope this works for you

Posted on Jul 05, 2008

Ad
Richie_asg1
  • 1036 Answers

SOURCE: 1992 Isuzu Rodeo Distributor wires 3.1L engine

Hi,
Isuzu seem to have complicated things by changing engines, firing orders and even direction of rotation! As you can see, they've numbered the cylinders the other way than the 3.2L.

The Firing sequence for the 3.1 (traditional distributor) 6 cylinder is as follows -

d6e5b2a.jpg

If you take the distributor cap off, there should be a "No.1" formed on the inside. Stick a lead on this before you put the cap back on and go from there.
As leads are different lengths, you may have to swap a few to find the best fit.

I think 2 of them will look out of place - but that's the way it's designed. Just make use of clips for holding them neatly.

Thanks for using Fixya.









Posted on Jul 06, 2008

lady_montana
  • 18 Answers

SOURCE: Isuzu Rodeo w/3.1L engine

Front Passenger side on cap is 1 - if you look on the inside of your cap there SHOULD be a pin marked with a 1, and the plugs go CLOCKWISE not counter. Just had the same problem myself with my 91 Rodeo. Cylinders are as follows Passenger side (front to back) 1 - 3 - 5, Driver side (front to back) 2 - 4 - 6. I called the Isuzu dealer and they told me it was counter clockwise, but when I hooked it up that way it backfired through the Carb.

Posted on Jul 19, 2008

honeymokey
  • 3113 Answers

SOURCE: Oil used in a 1992 Isuzu Rodeo

I worked for an Isuzu dealer and we used 10w30. All Isuzu v6's use oil and is normal for 1 or more qts. per 1500 miles per. Isuzu reps.!

Posted on Jan 06, 2009

stevenhurc
  • 450 Answers

SOURCE: I need advice on installing a new fuel pump 1992 Isuzu Rodeo

fuel tank has to be removed to remove fuel pump sender unit. make sure tank is near empty so its not as heavy to remove
some models have two round rings on top of tank, one is sender unit (for gauge) the other incorporates the fuel pump
others have one round ring which is both in one
remove the one near middle section of tank
be carefull not to bend float arm for sender unit if twin type (sender & fuel pump in one)

Posted on Jul 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 Isuzu Rodeo 3.1L V6 S model. Fuel not being delivered to the engine.


The roll over safety switch may have to be reset. It is in series with fuel pump relay interlock circuit.

May 19, 2017 | Isuzu Rodeo Cars & Trucks

1 Answer

I have a 1992 isuzu rodeo it wont start the engine is turning over but it still wont crank?


To clarify, if it turns over it cranks.
If you know it is not getting spark to the plugs, you will need to have someone check the rest of the ignition system including cap and rotor, module, and pickup coil in the distributor. (V6)
The first thing a mechanic would do is make sure the coil has voltage.

Jul 15, 2012 | 1999 Isuzu Rodeo

1 Answer

Need wiring diagram for 1992 Izuzu Rodeo 6 cyclinder.


For the 1992 Isuzu Rodeo 3.1L V6:
Firing Order
:

1-2-3-4-5-6
Cylinders:
.....(back)
5...............6
3...............4
1...............2
Distributor:
.....(back)
..............(+)-screw
.........4
..3
...................5
2
.................6
........1
(+)-screw
.....(front)
Rotation: Clockwise

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Aug 18, 2010 | 1992 Isuzu Rodeo

1 Answer

Distributor wiring


For the 1992 Isuzu Rodeo
I do not know if you have the 2.6L SOHC In-Line 4-Cylinder or the 3.1L V6; however I have included both below.

For the 2.6L:
Firing Order
:

1-3-4-2
Cylinders:
(back)
...4
...3
...2
...1
(front)
Ignition Coils:
(back)
1....2
3....4
(front)

For the 3.1L:
Firing Order:
1-2-3-4-5-6
Cylinders:
.....(back)
5...............6
3...............4
1...............2
Distributor:
.....(back)
..............(+)-screw
.........4
..3
...................5
2
.................6
........1
(+)-screw
.....(front)
Rotation: Clockwise

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 15, 2010 | 1992 Isuzu Rodeo

1 Answer

How do you take off a rotor on an 1992 Isuzu


you need to remove the locking hub

Sep 25, 2009 | 1992 Isuzu Rodeo

1 Answer

How do you put a 1992 isuzu rodeo back in time?


you mean the timing chain broke??? you will need it replaced and when they do that, it will be back in time.

Sep 23, 2009 | 1992 Isuzu Rodeo

1 Answer

Isuzu Rodeo w/3.1L engine


Front Passenger side on cap is 1 - if you look on the inside of your cap there SHOULD be a pin marked with a 1, and the plugs go CLOCKWISE not counter. Just had the same problem myself with my 91 Rodeo. Cylinders are as follows Passenger side (front to back) 1 - 3 - 5, Driver side (front to back) 2 - 4 - 6. I called the Isuzu dealer and they told me it was counter clockwise, but when I hooked it up that way it backfired through the Carb.

Jul 05, 2008 | 1992 Isuzu Rodeo

1 Answer

1992 Isuzu Rodeo Distributor wires 3.1L engine


Hi,
Isuzu seem to have complicated things by changing engines, firing orders and even direction of rotation! As you can see, they've numbered the cylinders the other way than the 3.2L.

The Firing sequence for the 3.1 (traditional distributor) 6 cylinder is as follows -

d6e5b2a.jpg

If you take the distributor cap off, there should be a "No.1" formed on the inside. Stick a lead on this before you put the cap back on and go from there.
As leads are different lengths, you may have to swap a few to find the best fit.

I think 2 of them will look out of place - but that's the way it's designed. Just make use of clips for holding them neatly.

Thanks for using Fixya.









Jul 05, 2008 | 1992 Isuzu Rodeo

1 Answer

1992 Isuzu Rodeo Distributor wires


Hi,

On the 3.2L distriburorless ignition, the firing order is a straight 1-2-3-4-5-6.

Cylinder numbering .

88c39f7.jpg-

Hope this works for you

Jul 05, 2008 | 1992 Isuzu Rodeo

Not finding what you are looking for?
1992 Isuzu Rodeo Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...