Question about 1999 Ford Explorer

1 Answer

How do I adjust the camber on the front passanger side of a 2000 model ford explora 4x4 xlt ,The driver side has adjustment but passanger side doesent seem to have adjustment. Regards Max

Posted by on

  • 1 more comment 
  • maxjames1 Sep 29, 2009

    I hope you dont get paid for this obvious advise

  • yadayada
    yadayada May 11, 2010

    wheel camber?

  • Anonymous Mar 21, 2014

    got an alignment done and was told camber needs adjusting



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 166 Answers

You should not be playing with the camber adjustments of your car unless you have a proper wheel aligner as you can course some major problems with your car i recommend you take it to your local tyre retailer and get them to adjust it for you

Posted on Sep 29, 2009

  • ash seder Sep 30, 2009

    why ask the question if you don't like the answer, i wasted my time giving you a good tip when i didn't have to if you have a wheel aligner and the skill to use it why don't you just ask the manufacturer for some advise as that is what they are there for, if not why be a ***** to me i don't need it i was just trying to help



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I have a 2010 Ranger 4x4 one front wheel campher and toe in are considerable off. What do I adjust to correct?

the camber is set on these by the bushings (offset) in the spindle platform and the bushing at anchor point near other side of arm , generally its not repairable its replaceable ! the toe is set by the screw adjustments ball joints attached to rack and pinion steering module , also are you sure its not the wheel bent, use the spare tire to ck adjustments or move a back wheel up front and test it again

Aug 12, 2016 | Cars & Trucks

1 Answer

How can I correct camber of -1.17?

castor/camber adjustment is by rotation the mounting bolts at the top of the inner guard
the top mount is eccentric and by undoing the nuts of the bolts and pulling the top mount down and rotating the mount so that the bolts are positioned in new holes , the camber/castor is altered
Normally there is sufficient adjustment to meet the + requirement so if your measurement is from other than suspension replacement I would have it inspected by a front end specialist shop for a bent axle or bent axle support arm

Jan 30, 2016 | 2000 Ford Windstar

1 Answer

How can I adjust my front camber for a Ford Focus?

Check if you don't have a arms are not Ben
check you tie rods you can ajust tem there 2bolt
on each end the top or the bottom

Apr 23, 2014 | 2000 Ford Focus

1 Answer

Changed all 4 struts on 03 cavalier, now the camber is off on the front wheels..

If you put on new struts the bottom bolt hole is oblong for camber adjustments.Where the old struts bottom hole was not. If you put a jack under the lower control arm, jack the wheel off the ground and adjust the struts camber to where the wheel looks straight.And tighten bolts.

Feb 02, 2014 | 2003 Chevrolet Cavalier

1 Answer

What causes camber ford excursion

camber is a front end alignment adjustment must have a front end machine to adjust camber

Feb 18, 2010 | 2001 Ford Excursion

1 Answer

Toyot acressida 1988.. my car has negative camber

there is no adjustment from the factory, but a really good front end tech can make it adjustable, suggest you take it to the Toyota dealer.

Sep 27, 2009 | 1988 Toyota Cressida

1 Answer

Rear Passanger Side Brake

Crawl under it and check that cable. See if it tighter than the other side and has free play. It could need adjusting, or oiling. If you can't find anything. Pull the brake drum. Check the springs and all the moving parts. And one more thing, your automatic adjuster might have over tightened that side.

Jan 04, 2009 | 2000 Ford Ranger SuperCab

2 Answers

1989 ford probe

if you loosened the strut bolts then you have to take it and have it aligned because it will wear the inside of your tire real fast

Jun 15, 2008 | 1989 Ford Probe

Not finding what you are looking for?
1999 Ford Explorer Logo

Related Topics:

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers


Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides