Question about 1996 Toyota Paseo

1 Answer

1996 Toyota Paseo check engine light on

Can anyone advise if the 96 is ODB1 or ODB2 and where the connector is. I found one other the hood but I think there may be another one.

Thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Toyota Master
  • 1,779 Answers

The Paseo is OBD2 (all '96 and up are, a few 95's of certain manufacturers are also, but generally anything 95 and older is OBD1). There are 2 possible locations, the one under the hood that you found, and another in the more typical driver side of steering column, below dash.

Posted on Sep 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Obd2 CONNECTOR BUT NOT OBD2 SOFTWARE


p0501=speed sensor fault.Check sensors on wheel hubs.

Apr 10, 2014 | 1995 Saab 900

2 Answers

Where is the plug in a 1994 toyota camry to hook up the diagnostic code box


Hi, according to autozone.com, the connector is under hood, driver side, side of strut tower, mounted on strut tower. The pic below, hoewever shows it mounted to the intake manifold. This is an OBD1 connector. You must use an OBD1 scanner to extract trouble codes or use the manual procedure pasted below. Please let me know if you need an explanation of the trouble codes (please specify your engine and trouble code) or have any other questions.

jturcotte_451.jpg

All models except the 1MZ-FE engine is equipped with OBD I till 1995.
  1. Make sure the battery voltage is at least 11 volts.
  2. Make sure the throttle valve is fully closed.
  3. Place the gear shift lever in Neutral. Turn all accessories off.
  4. The engine should be at normal operating temperature.
  5. Using a jumper wire, connect terminals TE1 and E1 of the Data Link Connector 1 (DLC1).
  6. Turn the ignition switch ON , but do not start the engine. Read the diagnostic code by the counting the number of flashes of the malfunction indicator lamp.
  7. Codes will flash in numerical order. If no faults are stored, the lamp flashes continuously every 1 / 2 second. This is sometimes called the Normal or System Clear signal.
  8. After the diagnosis check, turn the ignition OFF and remove the jumper wire.
  9. Compare the codes found to the applicable diagnostic code chart. If necessary, refer to the individual component tests in this section. If the component tests are OK, test the wire harness and connectors for shorts, opens and poor connections.

Apr 20, 2011 | 1994 Toyota Camry

2 Answers

1994 Paseo: 1993 toyota paseo. No fuel to engine, fuel in tan...


You should replace the fuel filter and check for vaccum leaks. Also you should check the compression of your vehicle this might solve your problem.

May 17, 2010 | 1994 Toyota Paseo

1 Answer

Obd11light keeps flashing,just put new plugs/wires in. how do i shut off light?


98 is odb2 . thair is an odb1 light on your car? u must be talking about service engine light . i would disconnect batery cables waite a few minuts and put them back on and drive the car and see what it does. if still a problem go to autozone and thay will do a free odb2 scann. post the codes here so i can help you out more

Apr 04, 2010 | 1998 Chevrolet Lumina

1 Answer

Starter 96 toyota paseo


You want a new one. It will cost you about sixty if your lucky. Hard to get it in and out of the small engine but you can do it. Its like three or four bolts and two wires. It attched to the transmission

Mar 02, 2010 | 1996 Toyota Paseo

2 Answers

My engine light is on in my 1993 Toyota Paseo and drinks gas


Check engine light can be multiple things. You have to bring it in to find the cause.

Jan 15, 2010 | 1993 Toyota Paseo

3 Answers

I need to know how to manually retrieve dtc codes without a scanner.What are the steps of this procedure.I have a 1995 chevy cavalier 2.2 l with a check engine light on.The pin terminal has 16 pins.


This info is from the tech manual.....because you have a 16-pin DTC connector, you have the OBD II system in your car. This is cut and pasted info from the tech manual:

Fig. 2: A Tech 1® , or equivalent scan tool must be used to retrieve codes from 1996–00 models with the 16-pin DLC connector


142a36f.gif
If you look on your doorjamb and read the sticker, it will tell you the year of your car...and if it was manufactured AFTER a certain month, then you have the 96 model...and from what you are saying, you have a 96 model because it has the 16-pin connector and not the 12-pin connector that the 95 and earlier had.

Reading Codes OBD-I SYSTEMS
69e20ca.gif

Jul 27, 2009 | Chevrolet Cavalier Cars & Trucks

1 Answer

How do i pull check engine codes for a 92 toyota


look for data link under hood. get a jumper wire.hook it to terminal E1 AND TE1.IF YOU CANT LOCATE IT.GET A HAYNES MANUAL.IT WILL MAKE IT EASY TO LOCATE.

Jul 25, 2009 | 1992 Toyota Paseo

1 Answer

Synthetic or stay with regular oil ?


I would not change to synthetic. The Paseo engine is not designed for it, and the benefit of synthetic oil will not be realized. Save your money, and stay with the regular oil.

May 19, 2009 | 1996 Toyota Paseo

1 Answer

Engine light on


Try A DPFE sensor ( Differential FeedBAck ) sensor that controls the EGR .. Lemmie know

Mar 17, 2009 | 1996 Toyota Paseo

Not finding what you are looking for?
1996 Toyota Paseo Logo

Related Topics:

406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...