Question about 2003 Ford Focus
2003 ford focus se heat gauge and speed not working
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Follow the upper radiator hose to where it attaches to a housing (2bolts hold the housing in place) remove the hose clamp here and then remove the housing bolts, inside the housing is your thermostat. Clean off the surface of the housing, and where it attaches to the engine. Install the thermostat, and a new gasket (or O -ring ), carefully replace the housing, being sure the thermostat doesn't slip out of position, tighten the housing bolts, reattach the radiator hose to the housing, add coolant to proper level, check for leaks, u r good to go! Make sure the thermostat is installed in the right direction, if put in backwards the car will overheat. countrycurt0
Posted on Oct 14, 2008
it may have a static charge in the instrument cluster,try un-hooking the battery then turn the key on and even hit the brakes to try to drain the spark out of the system,hooking the 2 cables together with the battery disconnected may work as well to drain it.hook up the battery and see what happens,but make sure the key is off and nothing is on-lights,radio,wipers etc,it could send a spark to the computer.
Posted on May 31, 2009
Your blower motor resistor has gone bad, it should be located next to your blower motor in the car, held in place with a couple of screws, remove it and replace it. The resistor is responsible for making the blower motor run at slower speeds than high or (4). Let me know if this helps.
Posted on Jun 16, 2009
This can be caused by a few things. First, the fan motor may be burned out or the temperature switch may be malfunctioning so the fan doesn't engage. The thermostat may also have gone out which prohibits the coolant to circulate through the engine and radiator thus cooling your engine.
Posted on Jul 16, 2009
i hope this is what your looking for.heres a diagram of the waterpump and pulleys, waterpump is driven by the timing belt, hope this helps.
Posted on Jan 28, 2010
Tips for a great answer:
Oct 06, 2015 | Ford Cars & Trucks
Dec 30, 2012 | Cars & Trucks
Nov 27, 2012 | 2003 Ford Focus
Apr 06, 2011 | 2003 Ford Focus
Oct 24, 2010 | 2003 Ford Focus
Sep 03, 2010 | 2000 Ford Focus
May 31, 2009 | 2003 Ford Focus
76 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: