Question about 1996 Toyota Camry

3 Answers

1996 Toyota Camry question. If the brakes start

1996 Toyota Camry question. If the brakes start to fail, will a sensor light come on the dash for the warning?
Thanks, Cheryl

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,004 Answers

Not at all.

Posted on Sep 28, 2009

Testimonial: "Thanks!"

Yes or No. You would not drive a vehicle for years without ever disassembly,cleaning and lube of you r brakes between pad and rotor service. So you wouldn't ever get to the sensor point , and brakes never fail,there neglected by every vehicle owner. Please don't view my approach as negative but most people only do break down service/maintenance. I have never had a brake issue in 46 years doing my own veh work, and I owned a shop at one time.

Posted on Sep 28, 2009

Testimonial: "Last year my mechanic looked at them and said they were fine. My brakes are working fine, but the brake pedal just feels a little different. "

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 439 Answers

No, the only time a light will come on the dash is if the pads are so worn the master cylinder has to go beyond the normal operating range. Other than that you will hear squealing from the wheels when you use the brakes. This is an indicator the pads are getting worn. If you feel sponginess in your brakes you should get them checked out as soon as you can as failure may be close.

Posted on Sep 28, 2009

Testimonial: "Thanks, just the info I needed."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Toyota Camry quit at a stop light and won't start.


407ec0c6-6132-455d-929c-e986d8cbd072.png
Good morning Sir,

I have problem with the1998 (2.2) toyota camry.
The car was idle for weekend (2 days) & the engine fail to start on Monday. The attahment show the indicator "blinking" in the dash panel.

Need help. Thanks.

Apr 18, 2013 | 1998 Toyota Camry

1 Answer

2000 toyota camry back window brake light is out how to change


Brake window light assembly just clicks off rear dash. IMPORTANT>Replace bulb from Toyota dealer or else brakelight warning light in dash will come on. Something to do with the proper ohms.

Nov 08, 2011 | 2000 Toyota Camry

1 Answer

NOT CABLE ON CAMRY 1996 FOR CODE FAULT READING HOW DO U FIND OUT WHY THE CHECK ENGINE LIGHT IS COMING ON


CHECK ENGINE LIGHT IS NOT COMING ON BECAUSE EITHER BULB BURN OUT IN DASH OR THE CHECK ENGINE LIGHT CONTROL CIRCUIT SHORTED TO POWER OR THE CONTROL POWER IS OPEN IN THE INSTRUMENT CLUSTER.THE PCM FAILED.

Sep 23, 2011 | 1996 Toyota Camry

1 Answer

Brake light on dash board turns on/blinks, hand brake is down and brake fluid is gauged


Did you check the brake fluid n sensor inside. Could be the pump itself fail.

Oct 31, 2010 | 2003 Toyota Camry

1 Answer

1996 Toyota Camry V6 LE. Started just fine but


Sounds like the shift lock is acting up possible its a fuse, but I would think that its more serious.

Dec 23, 2009 | 1996 Toyota Camry

1 Answer

The dash lights for the heater and control on my


You need to remove complete front dash panel, where are the knobs. First start with the radio cover, after go gently through the all screws, which holds the dash panel. Don't worry, the Toyota plastic material is very good processed and is strong but elastic. Yes after dismounting it will look like You will be scared, but step by step You will finish it good.

Dec 16, 2009 | 1996 Toyota Camry

1 Answer

1996 TOYOTA CAMRY IN THE MAIN MONITOR I HAVE A LIGHT ON OF THE BATTERY AND THE CAR WITH THE REAR LIGHTS ON, WHAT IS IT?


The battery light indicates your vehicle has battery voltage or lower, meaning your alternator is not charging correctly or the battery is not receiving the charge correctly.

Have your charging system tested to determine if the fault is the alternator or the battery. it is usually the alt.

The picture of the car with the rear lights on is your rear light failure indicator.
It is telling you that you have either a tail or brake bulb that is blown out... although with age the sensors tend to fail, so if all the bulbs work, look into the tail light module as a problem. It is located in the drivers rear wheel well behind the carpet and is yellow. it typically will have burn marks on it when it fails.

Sep 14, 2009 | 1996 Toyota Camry

2 Answers

Lower brake lights on 92 camry wont work


YOU MAY NEED A LIGHT FAILURE SENSOR WHICH IS LOCATED IN THE TRUNK ON THE DRIVERS SIDE

Feb 11, 2009 | 1992 Toyota Camry V6

Not finding what you are looking for?
1996 Toyota Camry Logo

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...