Question about 2000 Dodge Grand Caravan

1 Answer

All of my windows works except the driver side window. the motor feels hot, but it will not roll down the window. The fuse is good. The window will not roll down.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Using 12 volt test light back probe motor connector work switch up and down light should illuminate both terminals if so hold window button down small hammer tap directly on motor

Posted on Sep 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Tried it today and none of the windows work from master switch on drivers side except ft passenger window, which went down but will not go back up.


You can't put up the front passenger window with it's own switch ? Did you check the POWER WINDOW RELAY in the instrument panel fuse / relay box ? An you checked POWER fuse 30amp same fuse box ? All window switches have direct power from power window relay !
Fuse Block - Instrument Panel
Left of the Steering Column, behind the storage Compartment
P/W Relay
--
Sunroof Switch Assembly, Window Switch - Left Front, Window Switch - Left Rear, Window Switch - Right Front, Window Switch - Right Rear

Apr 02, 2015 | 2003 Pontiac Vibe

1 Answer

How do I manually roll up a 1999 jeep grand Cherokee power drivers side window


sure, take off door car
access motor,. and remove motor or find a way to move its gear
drive to put window up
or hot wire motor. (one way goes down, other polarity up)
ask for how to hot wire, (do so connector at motor pulled)
use a jumper wire with 15amp inline fuse #18 gage wire or larger.

Feb 19, 2015 | 1999 Jeep Grand Cherokee

1 Answer

Driver's side front window motor gets extremely hot causing the window to not roll up or down. When unplugged and allowed to cool, the window works for a few seconds. Car does not have to be running for...


Sounds like the motor is bad. I would remove the motor and push the window up and down to make sure it moves freely in its channels and the regulator is working right. After replacing motor its a good idea to lube the channels with silcone spary. good luck.

Aug 14, 2010 | 1996 Ford Taurus

1 Answer

MY 2006 DOdge ram Thunder Road's windows dont work. They used to work i bought the truck new. All of a sudden all the windows from every control dont roll down their own windows as well as the driver side...


your truck also has power relays working with the fuses. each door has its on circuit except the main controller in drivers side door. if u cannot control anything from drivers side then look at the relays for possible cause to your problem.

Apr 22, 2010 | 2006 Dodge Ram

1 Answer

Drivers side window won't roll up


check for power at that window motor plug behind door panel while operating window switch. No power? replace window switch. Have power? replace motor.

Nov 28, 2009 | 2006 Dodge Stratus

2 Answers

The drivers side window auto up/down quit


1. Start the car and leave it idle.
2. Hold the window button down all the way, until the window is completely down.
3. Let go and push it down again and hold the window button for 2 to 3 seconds then let go. (You should be able to hear or feel (very faintly) the motor/sensor reset.)
4. Pull up on the window button and roll the window up until it is all the way up, when it is up let go.
5. Pull the button up again for 2 to 3 seconds. (You should be able to hear or feel (very faintly) the motor/sensor reset.)

Nov 02, 2009 | 2008 Honda Pilot

2 Answers

I have a 1992 Chevy S-10 Blazer with power windows. I am looking for the regulator and cant find it. Where is it located? I have already checked the only places I can think of under the hood and by the...


the windoe regulator is inside the door each window that goes up and down have their own regulator it is attached tothe window except for the one thats broken lol

Aug 06, 2009 | Chevrolet S 10 Cars & Trucks

2 Answers

2000 Ford expedition window problem


Sounds like you need a window motor. Try hitting in center of door trim panel to see if you can get it to work if so replace motor.

Jul 05, 2009 | Ford Expedition Cars & Trucks

1 Answer

97 Accord drivers side window won't go up or down....


Window motors & regulators go bad every day. Pull your door panel, unplug the motor, if you have an ohm meter apply the leads to the leads into the motor. One will be ground the other two will raise and lower (reverse) the motor. If you show resistance between the leads the motor windings are good and the problem may be the window regulator. If you do not have an ohm meter, you can run two wires (one ground, the other hot) and test the motor by applying elec to it.

Jul 02, 2009 | 1997 Honda Accord

Not finding what you are looking for?
2000 Dodge Grand Caravan Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...