Question about 1999 Daewoo Lanos
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
A typical tune up includes spark plugs, air filter, fuel filter, spark plug wires, distributor cap and ignition rotor. You must determine which parts are needed before you start.
I would suggest to first check spark plugs and spark plug wires.
Posted on Jun 17, 2008
DTC 63 Will Set When
No voltage is supplied by the ECM through the EST “B” line while reference pulses are received by the ECM from the crankshaft position sensor
check white wire terminal B on ignition coil to ECM terminal C14 for open circuit or short to ground while disconnected if thats ok check for voltage signal at B while cranking no signal ECU faulty. voltage signal also on A terminal while cranking and check earth terminal C to body no higher than 5 Ohms
power is terminal D 12V
if getting power, earths good, and both signal voltages are going into coil pack, coil pack is faulty.
Posted on Jun 21, 2009
Tips for a great answer:
Feb 25, 2018 | Daewoo Cars & Trucks
Aug 17, 2016 | Daewoo Cars & Trucks
Mar 18, 2016 | 2001 Daewoo Lanos
Dec 27, 2010 | 2002 Daewoo Lanos
May 30, 2010 | 2001 Daewoo Lanos
Aug 01, 2009 | 1999 Daewoo Lanos
Apr 28, 2009 | 2002 Daewoo Lanos
Jan 12, 2009 | 2002 Daewoo Lanos
196 people viewed this question
Usually answered in minutes!