Question about 1997 Chrysler Sebring

1 Answer

1997 Chrysler Sebring convertable engines turns over doesn't start. Was running fine then stopped.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chrysler Master
  • 501 Answers

Two things to check for. Spark and fuel spay some fuel injector cleaner directly into the intake and if it want to start and shuts off you have a fuel delivery problem, probably a fuel pump or relay. If nothing happens check the spark . If you have no tools the old fashioned way of using a philips screw driver and attaching it to a plug wire and then putting it close to the block while it is turning over. Insulate yourself first. If you have no spark the usual reason on a Chrysler is the crank sensor, but it should be diagnosed before throwing parts at it.

Hope it gives you somewhere to go.
Rich

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1997 Chrysler Sebring cut out while running, replaced fuel pumd, cranksensor, got used distributer from running car, then replaced the computer and it started!! but cuts out right away!at first would


See if resetting your ECC (ECM) called the computer will get rid of these problems. You do it by unhooking both battery cables, waiting at least 15 minutes and rehooking the battery. No security thing, only the fact the computer needs new settings for the parts you installed.

Sep 10, 2012 | 1997 Chrysler Sebring

1 Answer

My 1997 chrysler sebring convertible turns over but will not start. The check engine light has been on since we bought it a month ago. we were told it was because of the o2 sensor.


you'll need a code reader to see the code no start issues can be many things check all your fuses does the engine crank is fuel flowing is do you have spark start by trying to get the codes

Sep 04, 2012 | 1997 Chrysler Sebring

1 Answer

My 97 Chrysler Sebring Convertible will start and take off fine but when you get to about 45-50 MPH it starts cutting out and jerking , what might cause this?


Have you done a tune up too the vehicle, thats a good place to start. A plug or coil could be having a hard time under load.

Apr 11, 2012 | 1997 Chrysler Sebring

3 Answers

My 97 Sebring died about a week ago and now it wont start. Found that the it was not firing. Changed the Distributor cap, rotor and distributor, along with the crank sensor. Placed new spark plugs in about...


Did you check the timing belt to see if it broke? It ha a 2.5 and it has belt. Remove timing cover at the front of the engine and have someone crank it while you watch the cam to see if it turns. If it doesn't turn, replace the belt.

Jun 05, 2011 | 1997 Chrysler Sebring

1 Answer

My 04 sebring convertible running great check engine light started flashing, engine died and coasted to a stop with sufficient battery will not turn over


Sounds like PCM (powertrain control module) "the computer". There's one for the trans and one for the engine. Call a part store for availability... auto dismantlers... my guess between $200 & $500.

Feb 27, 2011 | 2004 Chrysler Sebring

1 Answer

2005 chrysler sebring 2.4L 4cyl dohc engine wants to start


Get the exhaust system checked,you may need a new converter.

Nov 06, 2009 | 2004 Chrysler Sebring

1 Answer

1997 Chrysler Sebring Convert, Won't Stat


crank sensor could be bad if it is a six cylinder there was an issue with the distributor on the 2.5 that causes this

Aug 05, 2009 | 1997 Chrysler Sebring

1 Answer

P0302 Engine Code


Acroding to the codes it is a # 2 cylinder miss fire , sounds to me like there is a lot of carbon build up

Nov 21, 2008 | 1997 Chrysler Sebring

1 Answer

1997 Sebring starts, then stalls


You need to disarm the alarm, the 2 problems are related, the start and stall is caused by the fuel pump interupt function of the factory alarm, you triggered it when you replaced the battery, The reset procedure is in the owners manual.

Nov 07, 2008 | 1997 Chrysler Sebring

Not finding what you are looking for?
1997 Chrysler Sebring Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...