Question about 1990 Pontiac 6000

1 Answer

1990 Pontiac 6000 2.5 after driving, car stalls when put in gear.

Car stalls when put in gear. Runs great but after driving for over 15 min. car will stall at stop. When restarted, car will die when placed in drive or reverse. 1990 Pontiac 6000 2.5

Thanks Ya'll!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

You need to replace the TCC solenoid under the side cover pan of the transmission. You can also unplug the wires that go to the transmission in the front. After that it will not go into overdrive but it will stay running at stop lights untill you have it repaired.

Posted on Apr 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 88 grand am Se 2.0 OHC turbo, automatic the turbo does not work. my problem is that it runs great for about 1/2 hour driving until it gets warmed up. I come to a light it starts to surge and...


The TCC solenoid in the transmission needs to be replaced. It is under the side cover. It controls the converter to lock up for better fuel mileage. If you want to drive car until you get it fixed you can un-plug the connector going to the transmission on the front of transmission. This will keep it from going to lock up mode and keep it from stalling until you can fix it. Common problem.

Apr 02, 2011 | 1988 Pontiac Grand Am

2 Answers

Car runs fine when cold, when warm it stalls


My first guess is a vacuum leak or maybe a defective IAC. Tests need to be run to narrow the search down.

Apr 17, 2010 | 1990 Chevrolet Lumina

2 Answers

Car runs but when put in gear stalls


if your car stalls or trys to lerch forward when stoping at a light or stop sigh, then your over drive is loked meaning you need to have your transmition serviced or the electrical to the lockup solinoide needs to be checked

Apr 12, 2010 | 1996 Pontiac Sunfire

1 Answer

I have a 1990 Pontiac 6000 LE. The Car ran great


Sounds like you are loosing fuel pressure intermittently. Is there any damage to the fuel lines? Maybe the fuel pump is on its way out (loosing prime.) If you find this helpful, please rate, thank you.

Jun 04, 2009 | 1990 Pontiac 6000

1 Answer

1990 vette runs fine after 15-20 min won't start then wait 20 -min runs fine again until i shut it off


I had the same problem. Turns out,( and I didn't believe it when I was told) but, my problem turned out to be cheap (inferiour) plugs and wired. I was reccomended to use NKG plugs and Borg-Warner wires.

May 31, 2009 | 1990 Chevrolet Corvette

2 Answers

Stalls when put in gear


lock up solenoid in trans may be your problem

May 07, 2009 | 1990 Pontiac Grand Prix

Not finding what you are looking for?
1990 Pontiac 6000 Logo

Related Topics:

528 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...