Question about 2000 Jaguar S-Type
Your best to get the system "code read". Withhout seeing the carits impossible to say, it could be anything. Sensor failure, wiring fault etc. Make friends with a good Mechanic.
Posted on Oct 03, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 12, 2015 | Cars & Trucks
The IPC detects a loss of serial data communication with the EBCM
Traction Control System (TCS)
When drive wheel slip is noted while the brake is not applied, the EBCM will enter traction control mode.
The EBCM uses a 5-volt pulse-width modulated (PWM) signal to request the PCM to reduce the amount of torque to the drive wheels. The PCM reduces torque to the drive wheels by retarding spark timing and by commanding the throttle actuator control. The PCM uses a 5-volt PWM signal in order to report to the EBCM the amount of torque delivered to the drive wheels.
You would need a factory grade scan tool to check data PID's - parameter identification , all the sensors work within a specific voltage range 1- 5 volts an you can see this on a good scan tool !
The Traction control is part of the ABS system an there a several DTC possible
DTC B0827 DTC B0828 DTC B2745 DTC C0035 DTC C0035 or C0040 DTC C0040 DTC C0055 DTC C0110 DTC C0191 DTC C0201 DTC C0220-C0229 DTC C0240 or P0856 DTC C0244 or P1689 DTC C0245 DTC C0267 or C0268 and C067 or C068 DTC C0550 DTC C0899 DTC C0900
You best bet is to take it to a qualified repair shop !
Apr 07, 2015 | 2005 GMC Canyon
this warning light or any other stays on in the dash it is indicating
that the systems control module (or the system sensor in the case of
lights like low oil pressure, door open indicators etc.) has detected
a fault, it then disables the system (this applies to ABS,TCS, TCM,
SRS, TPMS and BCM faults and others) as long as the light is on. You
must now have the dealer hook up a special electronic diagnostic tool
and "scan" the system for the fault code that is stored for
Legend of Abbreviations. ABS Anti-lock brake system. TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module. TPMS Tire Pressure Monitor System
Nov 01, 2012 | Cars & Trucks
Feb 09, 2012 | 2006 Toyota Highlander
Apr 13, 2011 | 2005 Chevrolet Impala
Feb 11, 2011 | 2002 Pontiac Sunfire
Sep 26, 2009 | 2000 Jaguar S-Type
Sep 17, 2009 | Land Rover Discovery Cars & Trucks
Dec 30, 2008 | 2001 Oldsmobile Silhouette
452 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: