Question about Honda CR-V

1 Answer

I have a 2008 Honda CRV and for the life of me I cannot engage the Cruise control- I press the Cruise Button on the right of the steer wheel and nothing happens - nothing Help anyone ? Tks Nancy

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 563 Answers

The cruise-controls have 2-buttons that must be activated before it gets the car going when you remove your foot off the gas-pedal.
The cruise button is essentailly a switch that turns 'on' the cruise servo-motor that tells the sytems that you wants to use it, so it gets ready.
There are other three switches on the right-side of the steering wheel namely: resume accel; cancel; set decel.
To get your car to cruise: you must steady your speed and foot on the gas-pedal. You cannot just press the switches and expect the car to cruise. It takes about two-to-three seconds for the system to respond to a set cruising speed.
How to do it: accelerate to a speed of about 30-mph. Press the 'cruise' button on the dash first. Next you press 'set decel' button. This will turn 'on' the cruise control light on the instrument panel. Then wait a second or three and you would feel the cruise engagement. Any touch on the brake pedal will slow down the car and turns the cruise off. The 'cancel' button turns off the cruise light on the instrument panel.
If you hit the brake-pedal at any time for any reason, and you would like to continue cruising again, simply press the 'resume accel' button.
The cruise system works in conjunction with the braking system of the car. So all major parts of the braking system must be in good condition, otherwise the cruise system could shut off itself.





Posted on Dec 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Honda CRV cruise control doesn't after getting timing belt replaced


Very likely, the repair shop botched the repair, and failed to reconnect some kind of connection which is critical to the cruse control. Very typical in repair shops these days! I would take it back and complain!

May 11, 2017 | Honda CR-V Cars & Trucks

1 Answer

I have a 2005 honda crv, after changing the steering rack the cruise control is not working


There is a cable reel (clock spring) in the steering column. If it was not centered when you put in the rack than it probably broke.... Is the SRS light on too? This cable reel allows electrical connection to the air bag and the cruise control switch (mounted to the steering wheel), so you can turn the wheel. Its operating range is two and a half turns from center in both direction. When you disconnect the steering coupler from the rack the steering wheel moves, now the cable reel is not centered. If you put it back on in this position and turn the steering wheel fully to one side the cable reel breaks. That could be what happened, however the cable reel is very expensive so make sure that's it before replacing. I recommend performing an input test on the cruise control unit to confirm.

Nov 09, 2009 | 2005 Honda CR-V

2 Answers

1999 Lincoln Continental Cruise Control Set Button


check and see if theres a blowen fuse before you start taken the steering wheel apart

Sep 20, 2009 | 1999 Lincoln Town Car

2 Answers

My brother just bought a 2004 Lincoln Town Car Signature.....I helped him find this car and he now tells me that the cruise control does not work.....My guess is that he is trying to set the speed and not...


Turn on the Cruise control ON on left side of steering wheel accelerate to desired speed push set button on right side of steering wheel to turn cruise OFF press off or tap brake pedal

Jul 17, 2009 | 2004 Lincoln Town Car

1 Answer

Cruise control how to use


Most cruise controls are designed to disengage when you press the brake pedal. I always mention this first because people tend to try to press the clutch pedal while the cruise control is engaged and this startles them when the engine revs up all the way...

Anyway, to use your cruise control:

1) Press the Cruise control button to on.
2) Drive up to the speed you need to go.
3) Press the "Set/Coast" button.
4) let go of the accelerator pedal

If the cruise control system is operating correctly, your vehicle will continue to travel at the same speed until you either press the brake pedal or you cancel the cruise setting with the cancel button of the cruise control.

Remember: Your civic is not equiped with a radar system for your cruise control, so if you are aproaching an intersection or traffic in front of you, do not expect the car to know it needs to stop. Also, cruise control only operates the accelerator pedal i your car, it is not autopilot, so it will not steer your car for you.

(you think it sounds silly that I am writing this? You should see my friend's car... He thought Cruise control was like autopilot, so he smashed his brand new civic into a tree...)

Happy Motoring!

May 21, 2009 | 2002 Honda Civic

1 Answer

Why cruise control won't work on 2003 ford explorer


If you hit "On", cruise control is on. It's just not set to the speed.

To properly set the cruise control, do the following procedure:

  1. Select the "On" button on the left side of the steering wheel
  2. On the right side of the steering wheel, there is a "+" along with "Set", press that button after you have accelerated to the speed you desire to maintain.
  3. Use the "+ and -" to speed up or slow down your vehicle.
  4. To temporarly disable the cruise control, simply press the brake pedal.
  5. To resume the previously desired speed, press the top button "Resume"

Jan 20, 2009 | 2003 Ford Explorer Sport

1 Answer

2002 Honda Accord EX V6 cruise control failure


http://www.handa-accessories.com/accord/accswc.jpg

So after you push the button and then press the set button in the steering wheel it does not get into cruise control ? It sounds like a minor electrical problem. If you have warranty still I think the dealership should fix it for free.

Sorry i have not been able to help you.

Jan 02, 2009 | 2002 Honda Accord

2 Answers

Cruse controll


Pull up on the brake pedal. If that does not work check your brake light bulbs (LED brake lights will also keep your cruise control form working). Finally check all of the fuses. This system needs at least 3 different fuses to work properly.

Aug 05, 2008 | 1998 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

693 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...