Question about 1998 Volvo V70

1 Answer

Volvo v70 pcv valve change? - 1998 Volvo V70

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 60 Answers

On these cars it's more of a system than just a valve. This will walk you through it. http://www.volvoforums.com/forum/showthread.php?t=33970

Posted on Oct 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the pcv valve on volvo s60 2.0T 2002


The PCV ( Positive Crankcase Ventilator ) valve is located in a valve cover. It is identifiable by the largish hose ( usually about 1/2 - 3/4 inch diameter )going from it to the intake system. If you have a throttle body injection system, the PCV hose will go to the throttle body. Typically PCVs are on the passenger side of the motor.

Feb 21, 2015 | Volvo S60 Cars & Trucks

1 Answer

Where is the pvc valve on a 2008 volvo v50


There is no PCV Valve, there is a Flame Trap System underneath the Intake Plenum on the front side of the Block. These are made of plastic and get plugged up, crack, and the plastic Vacuum lines fail. IPD carries the entire system. You will have to remove the Intake Plenum so you will need a gasket for that as well.

May 25, 2014 | 1998 Volvo V70

1 Answer

Volvo v70 vacuum diagram


I take it you did not replace the PCV System. I would almost guarantee that you have a massive vacuum leak in that system. IPD has it for sale on their website and show a picture of the system outside the engine compartment so you will know what to look for. You will have to pull the Manifold again to do it.

Apr 18, 2014 | 2001 Volvo V70

2 Answers

Replace front crankshaft seal


When you replaced the front seal did you smear a bit of oil in side of the seal because sometimes if you don't you can nick the inner seal.
if the seal is ok the you most probably have a worn crank/cam shaft.
hope this helps

Jan 10, 2014 | Volvo Cars & Trucks

1 Answer

How do i change the pcv valve on my 2004 volvo s40? and where is it located?


location:Its a flame trap it separates the oil from ai
replacement:

  • 1

    Turn the Volvo 850 off and allow the engine and its components to cool for 30 minutes.

  • 2

    Open the hood of the Volvo 850 by pressing the hood release button within the vehicle. Locate the PCV valve; the valve is identified as a small rubber valve located on the engine crankcase. You will also notice a small hose sticking out of the end of the valve. If needed, read the Volvo 850 owner's manual for more information.


  • Disconnect the hose from the valve by pulling the hose out of the valve. The hose will come off the valve with minimal force.

  • 4

    Turn on the engine of the Volvo 850. Place your finger over the hole in the valve where the hose was connected. If you feel a strong suction, the valve is working properly and fine. If you do not feel a strong suction, the valve may be clogged and needs replacing.

  • 5

    Turn off the engine of the Volvo 850. Use needle-nose pliers and grip the valve. Pull the valve off of the crankcase.

  • 6

    Install a new valve by putting the valve in place on the crankcase. Insert the hose into the new PCV valve. Secure the new valve in place by pushing it down until it locks into place. Close the hood of the Volvo; pull up on the hood to ensure the hood is shut properly.


    X2 Performance Chip


  • Jun 19, 2012 | Volvo S40 Cars & Trucks

    1 Answer

    Where is the pcv valve located on a 1998 c70


    There isnt' one. Volvos are equipped with vent-box located underneath the intake manifold. Remove the oil dip stick tube and then the intake manifold and remove the box. Install a new breather box and make sure to clean the lines going to and from the box. If the breather box gets clogged, oil will push from the oil filler cap, dip stick tube and worst case, blow through the engine seals.

    Feb 28, 2011 | 1998 Volvo V70

    1 Answer

    Timeing belt needs replaced also valves on volvo v70d 2461cc


    Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1998 Volvo V70. Plus additional Instructional and Directional Diagrams.

    Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

    http://www.2carpros.com/car_repair_information/year/1998/make/volvo/model/v70/1998_volvo_v70_timing_belt_diagram_marks.htm

    Mar 06, 2010 | 1998 Volvo V70

    1 Answer

    How do you change the pcv valve on 94 volvo 850 glt


    It has a flame trap, no PCV valve per say. On your air inlet tube come from the throttle housing you'll see it. Disconnect the hose from throttle and air box.
    remove and twist flame trap out, replace plactic screen and reinstall.

    Sep 26, 2009 | 1994 Volvo 850

    1 Answer

    98 Volvo V70 Turbo engine oil leak


    It may be the gromet for the PCV valve or it could be the spark plug rubber seal located in the valve cover if it is the type of engine that has the wires and spark plugs that go down through the valve cover, if this is the case buy a valve cover gasket with the rubber gromets that are located around the base of the hole where spark plugs fit through and install.

    Jul 08, 2009 | 1998 Volvo V70

    Not finding what you are looking for?
    1998 Volvo V70 Logo

    Related Topics:

    2,313 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Volvo Experts

    yadayada
    yadayada

    Level 3 Expert

    75117 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7772 Answers

    Are you a Volvo Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...