Question about 2000 Daewoo Leganza

2 Answers

Evap code p0446. have replave evap solinode and perge valve. can run car all day long without light coming on, but when it sets over night light comes on after 1 or 2 minutes after starting. also runs rough after filling tank

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Daewoo Master
  • 3,433 Answers

Yes, because the vapor recovery fuctions on the vapor pressure of the fuel tank.

Posted on Sep 28, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

I would double check for any air leaks. Replace fuel filter. You will also need to reset computer after new parts are installed. This can be done with a hand-held scanner or diagnostic scanner

Posted on Sep 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 06 cobalt has these codes can anyone tell me what they mean? Are they an expensive fix? p0446,p0455, p0172


code p0446 refers to evaporative emission (EVAP) system-vent control-circuit malfunction===causes --wiring--EVAP canister purge valve--ECM
code p0455 refers to EVAP system-large leak detected===causes --hose connections--intake leak--EVAP canister---EVap canister purge valve
code p0172 refers to system too rich, bank 1===causes intake blocked---EVAP canister purge valve--fuel pressure ---EGR system---injector/s ---ECM
because the EVAP purge valve appears in all codes I would be inclined to change that unit first the run the fault codes again

Jul 23, 2015 | 2006 Chevrolet Chevrolet Cobalt LT

2 Answers

What does code p0446 mean on a 2001 Buick Centry?


P0446 Evaporative Emission Control System Vent Control Circuit Malfunction The code P0446 is set when the engine computer recognizes a fault or restriction at the vent control part of the Evaporative emission control system (EVAP). The description of the fault varies between different car manufacturers, but one thing is common, the code P0446 doesn't directly point to a defective part; some testing might be required to pinpoint the faulty component. What can cause the code P0446: - faulty vent control valve - blockage at the vent hose, vent filter or vent control valve - open or short in the vent control valve circuit - bad charcoal canister - EVAP system leak - faulty EVAP system pressure sensor - bad vacuum switching valve (VSV) - stuck open purge valve (solenoid)

Aug 13, 2014 | 2001 Buick Century

1 Answer

Hello there,my 2001 echo is lighting up trouble codes p0440 p0441 p0446; how and where should i start?


code p0440 refers to evaporative emission (EVAP) system--malfunction=== causes --hose connections --intake leak--EVAP canister purge valve
code po441 refers to EVAP --incorrect flow detected==causes the same as for po440
code po446 refers to EVAP system vent control --circuit malfunction===causes --wiring---EVAP can purge valve--ECM
generally I would replace the purge valve as it is common to all codes

Feb 03, 2014 | Cars & Trucks

1 Answer

Have a code come up code is 0446 on a 4.3 1996 sonoma


DTC P0446 - Evaporative Emmission Control System Vent Control Circuit

Evap vent valve has only one purpose. It closes in order to seal the vent so the EVAP system can pressurize and ensure there are no leaks. Evap vent valve is usually supplied Batt. voltage with key on. The ECM's driver controls the ground, and when grounded, activates the valve (closing it). If the ECM detects a short to ground, and open,or a short to battery voltage on the control circuit, P0446 will set. Code also may refer to ECM detecting that EVAP system is unable to achieve or maintain vacuum during test.

Symptoms: There will be no obvious symptoms to driver, other than MIL illumination.


Causes: A code P0446 could mean one or more of the following has happened:
  • Faulty vent valve
  • Open, short or excessive resistance on Vent valve control circuit
  • Blockage of vent valve
  • Bad PCM
Possible Solutions: With a P0446 OBD-II trouble code, here are some things to try:
  • Replace Vent valve
  • Repair open, short, or resistance problem in control circuit
  • Repair open, or short, or resistance problem in power circuit
  • Replace PCM

Hope helps (remember to rate this answer).

Nov 03, 2010 | 1996 GMC Sonoma

1 Answer

I have a 0446 code come up on a 1996 sonoma 4.3 engine


DTC P0446 - Evaporative Emmission Control System Vent Control Circuit

Evap vent valve has only one purpose. It closes in order to seal the vent so the EVAP system can pressurize and ensure there are no leaks. Evap vent valve is usually supplied Batt. voltage with key on. The ECM's driver controls the ground, and when grounded, activates the valve (closing it). If the ECM detects a short to ground, and open,or a short to battery voltage on the control circuit, P0446 will set. Code also may refer to ECM detecting that EVAP system is unable to achieve or maintain vacuum during test.

Symptoms: There will be no obvious symptoms to driver, other than MIL illumination.


Causes: A code P0446 could mean one or more of the following has happened:
  • Faulty vent valve
  • Open, short or excessive resistance on Vent valve control circuit
  • Blockage of vent valve
  • Bad PCM
Possible Solutions: With a P0446 OBD-II trouble code, here are some things to try:
  • Replace Vent valve
  • Repair open, short, or resistance problem in control circuit
  • Repair open, or short, or resistance problem in power circuit
  • Replace PCM

Hope helps (remember to rate this answer).

Nov 03, 2010 | GMC Sonoma Cars & Trucks

2 Answers

P0446 code on a 2004 ford expedition 5.4


P0446 - Evaporative Emission Control System Vent Control Circuit Malfunction

Evap vent valve has only one purpose. It closes in order to seal the vent so the EVAP system can pressurize and ensure there are no leaks. Evap vent valve is usually supplied Batt. voltage with key on. The ECM's driver controls the ground, and when grounded, activates the valve (closing it). If the ECM detects a short to ground, and open,or a short to battery voltage on the control circuit, P0446 will set. Code also may refer to ECM detecting that EVAP system is unable to achieve or maintain vacuum during test.

Symptoms: There will be no obvious symptoms to driver, other than MIL illumination.

Causes: A code P0446 could mean one or more of the following has happened:
* Faulty vent valve
* Open, short or excessive resistance on Vent valve control circuit
* Blockage of vent valve
* Bad PCM

Possible Solutions: With a P0446 OBD-II trouble code, here are some things to try:
* Replace Vent valve
* Repair open, short, or resistance problem in control circuit
* Repair open, or short, or resistance problem in power circuit
* Replace PCM

I hope help with this (remember to rate and comment this).

Oct 02, 2010 | 2004 Ford Expedition

3 Answers

The check engine light stays on or comes back on when doing smog test. It passed everything on the smog test except check engine light. The indicator code is P0446.


Hi:
Your P0446 code is a Evap vent valve code: Evap vent valve has only one purpose. It closes in order to seal the vent so the EVAP system can pressurize and ensure there are no leaks. Evap vent valve is usually supplied Batt. voltage with key on. The ECM's driver controls the ground, and when grounded, activates the valve (closing it). If the ECM detects a short to ground, and open,or a short to battery voltage on the control circuit, P0446 will set. Code also may refer to ECM detecting that EVAP system is unable to achieve or maintain vacuum during test.
copyscape.gif Symptoms There will be no obvious symptoms to driver, other than MIL illumination.
Causes A code P0446 could mean one or more of the following has happened:
  • Faulty vent valve
  • Open, short or excessive resistance on Vent valve control circuit
  • Blockage of vent valve
  • Bad PCM
Possible Solutions With a P0446 OBD-II trouble code, here are some things to try:
  • Replace Vent valve
  • Repair open, short, or resistance problem in control circuit
  • Repair open, or short, or resistance problem in power circuit
  • Replace PCM

Nov 20, 2009 | 1997 Ford Explorer AWD

1 Answer

P0446


Check for any damage to the cap or on the wiring if no damage is visable replace the cap.

Aug 27, 2009 | 2007 Ford Explorer Eddie Bauer

2 Answers

Car codes


When you have P0440, P0441 and P0446, it is a very good bet that the fuel cap was loose, or the fuel cap rubber seal is compromised. You will get all three of those codes every time that the cap is loose. Always make sure that the fuel cap is as tight as you can get it after you refuel.

Nov 05, 2008 | 2001 Lexus RX 300

Not finding what you are looking for?
2000 Daewoo Leganza Logo

432 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...