Question about 2002 Lincoln Continental
If your thermsotat is good, and you have good antifreeze, then your heater core will need to be replaced
Posted on Sep 28, 2009
When the engine is cold,check the coolant level.
Make sure it's on max.
A coolant system should be flush every two years.
If you did a coolant flush recently then air pocket can be the cause of the un-even heating problem.
The DIY method is to drive you car onto a ramp or a steep hill.
Iet the engine cool off and top off the coolant tank.
Set MAX heat + MAX fan
Let the engine ran for 20 minutes wih the cap off and the trap air will escape from the coolant reserve tank,
Check coolant level and top off coolant when the engine cools down.
A shop will charge $75+ for this but using an air operated excavate tool!
A car with over 90K miles may experience linkage problem to the heater control valve.
The heater control valve (near the firewall) may be stick over time.
Open the hood and move the heater to max and min. Back and forth.
Clean and lube the linkage with WD-40 to free the heater control valve.
If it's a vacuum type heater control valve then cash for leaky vac. hoses.
Move the fan switch back and forth to re-new the electrical conductors.
Pass a vacuum over the control panel to prevent dust build up behind the console.
Posted on Dec 03, 2009
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 29, 2012 | Chrysler Town & Country Cars & Trucks
May 23, 2012 | 2005 Chevrolet Aveo
Nov 10, 2011 | 1997 BMW 7 Series
Apr 17, 2010 | Land Rover Discovery Cars & Trucks
Nov 14, 2009 | 1993 Mercedes-Benz 190
149 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: