Question about 1992 Ford Taurus

Open Question

1992 ford taurus coolant fan wiring diagram

I need a wiring diagram for the coolant fan on a 1992 ford taurus with a 3.8. Thank you

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76109 Answers

SOURCE: 2002 Taurus stereo

Here are the factory wire colors, please rate this solution to your problem, a note any stereo store that sells auto decks has adapter wiring harnesses to do a direct plug in of your DIN standard radio you are trying to install, no cutting of the factory harness, they are cheap

2000 Ford Taurus Car Radio Stereo Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Green/Black
Car Radio Accessory Switched 12v+ Wire: Black/Pink
Car Radio Ground Wire: Black/Green
Car Radio Illumination Wire: N/A
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Orange/Green
Left Front Speaker Negative Wire (-): Blue/White
Right Front Speaker Positive Wire (+): Tan/Green
Right Front Speaker Negative Wire (-): Green/Orange
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Gray/Blue
Left Rear Speaker Negative Wire (-): Brown/Yellow
Right Rear Speaker Positive Wire (+): Black/Violet
Right Rear Speaker Negative Wire (-): Orange/Violet
-->

Posted on Nov 23, 2008

Ad
jpk528
  • 95 Answers

SOURCE: i need a stereo wiring diagram for a 05/06 ford

Battery GREEN/BLACK (+) RADIO HARNESS
Accesory BLACK/PINK (+) RADIO HARNESS
Ground BLACK/GREEN (-) RADIO HARNESS
LF Speaker (+) ORANGE/GREEN
LF Speaker (-) BLUE/WHITE
RF Speaker (+) TAN/GREEN
RF Speaker (-) GREEN/ORANGE
LR Speaker (+) GRAY/BLUE
LR Speaker (-) BROWN/YELLOW
RR Speaker (+) BLACK/VIOLET
RR Speaker (-) ORANGE/VIOLET

Posted on Feb 20, 2009

  • 1 Answer

SOURCE: need diagram for serpentine belt on 2000 Ford Taurus, 3.0L

can i get a diagram for this?

Posted on May 05, 2009

blueextc3221
  • 15935 Answers

SOURCE: need diagram of serpentine belt for 94Solution for "need diagram for replacing serpentine belt for 94 ford taurus gl w/3 0 v6 engine and a/c" ford taurus gl w/3.0 v6 engine and a/c

89beac5.gif Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Posted on May 21, 2009

c17hydro
  • 2984 Answers

SOURCE: 2002 ford taurus wtaer pump

Removal & Installation 3.0L (2V) To Remove:

  1. Drain the engine cooling system.
  2. Loosen the water pump pulley.
  3. Remove the bolt and the nut and position the roll restrictor bracket out of the way.
  4. Remove the accessory drive belt.
  5. Remove the generator.
  6. Remove the bolt and the accessory drive belt tensioner.
  7. Remove the nut, the bolt and the support bracket.
  8. Remove the bolts and the water pump pulley.
  9. Disconnect the water pump inlet hose and the crankshaft position sensor electrical connector.
  10. Remove the bolts and the water pump, and clean the sealing surfaces
To Install:
  1. Install the water pump. Tighten bolts in the sequence shown:
    1. Tighten numbers 1-7 to 18 ft.-lbs. (25 Nm)
    2. Tighten numbers 8-12 to 89 in.-lbs. (10 Nm)
    3. Connect the crankshaft position sensor electrical connector and the water pump inlet hose
    4. Install the support bracket.
    5. Install the accessory drive shaft tensioner.
    6. Install the generator.
    7. Install the roll restrictor bracket, bolt and the nut.
    8. Install the water pump pulley.
    9. Install the accessory drive belt.
    10. Connect the battery ground cable.
    11. Fill the engine cooling system.

9de9feb.gif
Water pump bolt torque sequence (3.0L (2V) engine)

Posted on Jul 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radiator fans are not working


With the switch on cross the 2 wires going to the coolant temperature sensor and if the fan comes on then replace the coolant tenp sensor.You check the fan relay by switching it with another with the same part on it in the fuse panel.

Oct 31, 2012 | 2000 Ford Taurus

1 Answer

A/C wiring diagram


do you have enough coolant

Aug 16, 2012 | 1992 Ford Taurus

1 Answer

MY 1992 FORD TAURUS IS LEAKING COOLANT or looks like coolant same cooler. leakin from under engine block on left and right it looks like.... and there now is a strong smell of burnt rubber that consistant...


You need to find out exactly where it is leaking out at. If you get that coolant on wires, it can cause all kinds of problems. Check your belt and make sure there is no tears and that it is not sticking. You might have a pulley sticking or something. Raise the hood and start your car, Make sure the belt is acting normal.

Feb 03, 2011 | 1992 Ford Taurus

2 Answers

How to change a radiator on a 1996 ford taurus


  1. Step 1 Drive your Ford Taurus up a set of ramps onto a pair of jack stands, if it is a 1996 model or newer. Remove the lower splash shields. For 1986 through 1995 models, you can remove all necessary components from above.
  2. Step 2 Begin by disconnecting the negative battery terminal and draining the radiator into a transportable container. Open the plastic draincock on the lower rear of the radiator and crack the radiator cap.
  3. Step 3 Remove the overflow tube from the coolant recovery bottle and disconnect it from the radiator. On SHO model engines, remove the recovery bottle as well. Next unscrew the shroud and remove it from the retaining clips. Disconnect the wires to the fan motor, and remove the fan assembly and shroud in one piece.
  4. Step 4 Squeeze the hose clamp ends together on the radiator side, and remove the upper and lower hoses. For automatic transaxle models, use either the custom Ford disconnect tool T82L-9500-AH or two crescent wrenches to remove the transmission coolant lines.
  5. Step 5 Disconnect the radiator supports. 1986 through 1992 models will have two upper retaining screws for 3.0 liter and SHO engines. 3.8 liter engines will have two driver's side hex nuts and two passenger side screws. All other models have either the upper screws or the combination of right hand hex nuts and left hand screws.
  6. Step 6 Tilt the radiator backwards toward the engine and lift it out. Fit the new radiator into the support and replace the support screws and nuts. Reattach the hoses and wires in reverse order.
  7. Step 7 Flush the new radiator with either water or a commercial flush treatment. Connect your battery terminals and replace the coolant and let the engine idle for 5 to 10 minutes with the heater on and the radiator cap removed. Top off the coolant as necessary.
Thank you,
Lee

answer found here:
http://www.ehow.com/how_4506379_replace-radiator-ford-taurus.html

Aug 10, 2010 | 1996 Ford Taurus

1 Answer

Radiator fan not working


The most common problem with this situation is the coolant fan relay being defective, best off buying one from the dealer and at the same time they will tell you where the switch is laocated, generally they are fitted into the radiator tank or intake coolant portion of the vehicles coolant system.

May 08, 2010 | 1992 Ford Taurus

1 Answer

How to change radiator in a 2001 ford taurus


Instructions Things You'll Need:
  • Ramps and jack stands
  • Phillips and flat head screwdrivers
  • Container for used coolant
  • Crescent wrenches or Ford disconnect tool T82L-9500-AH
  • Hex nut screwdrivers
  • New radiator
  • Flush treatment
  • Coolant
  1. Step 1 Drive your Ford Taurus up a set of ramps onto a pair of jack stands, if it is a 1996 model or newer. Remove the lower splash shields. For 1986 through 1995 models, you can remove all necessary components from above.
  2. Step 2 Begin by disconnecting the negative battery terminal and draining the radiator into a transportable container. Open the plastic draincock on the lower rear of the radiator and crack the radiator cap.
  3. Step 3 Remove the overflow tube from the coolant recovery bottle and disconnect it from the radiator. On SHO model engines, remove the recovery bottle as well. Next unscrew the shroud and remove it from the retaining clips. Disconnect the wires to the fan motor, and remove the fan assembly and shroud in one piece.
  4. Step 4 Squeeze the hose clamp ends together on the radiator side, and remove the upper and lower hoses. For automatic transaxle models, use either the custom Ford disconnect tool T82L-9500-AH or two crescent wrenches to remove the transmission coolant lines.
  5. Step 5 Disconnect the radiator supports. 1986 through 1992 models will have two upper retaining screws for 3.0 liter and SHO engines. 3.8 liter engines will have two driver's side hex nuts and two passenger side screws. All other models have either the upper screws or the combination of right hand hex nuts and left hand screws.
  6. Step 6 Tilt the radiator backwards toward the engine and lift it out. Fit2.gif the new radiator into the support and replace the support screws and nuts. Reattach the hoses and wires in reverse order.
  7. Step 7 Flush the new radiator with either water or a commercial flush treatment. Connect your battery terminals and replace the coolant and let the engine idle for 5 to 10 minutes with the heater on and the radiator cap removed. Top off the coolant as necessary.

Nov 13, 2009 | 2001 Ford Taurus

2 Answers

1992 Ford Taurus with a 3.8l V6 the cooling fan


The Taurus has Two temp sensors. One for the dash, which is isolated, then one for the PCM, it also controls when the fan relay should actuate. Its a 2 wire sensor, just above the thermostat. If you remove the harness from that sensor, and the cooling fan comes on, at any temp, (should take 5- 10 seconds) then thats your fault.

Sep 16, 2009 | 1992 Ford Taurus

1 Answer

92 FORD TAURUS COOLING SYSTEM FAN NOT WORKING


Fan Relay. In the fuse box under the hood

Jun 04, 2009 | 1992 Ford Taurus

1 Answer

Need wiring diagram for 1992 ford taurus 3.8 ccrm wiring diagram?


autozone.com has online repair manuals with wiring diagram check it out

Mar 07, 2009 | 1992 Ford Taurus

1 Answer

Need a diagram of the fuse panel for 97 ford taurus. and also a wiring diagram for power windows of the same car please help me.


If interested, I can send you the fuse diagram info for the Taurus. Email ehephaestus454@netzero.net if you are.

With a SASE and a $1 donation, I can mail you a copy. Thanks!

Jul 18, 2008 | 1992 Ford Ranger

Not finding what you are looking for?
1992 Ford Taurus Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...