Question about 1993 GMC Sierra

Open Question

How do yo u time a gmc 1500 4.3 V6 the truck wont start and i tired to time it. the number one pistent was up te distriber was facing tord the number one pisten

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 10 Answers

SOURCE: 1990 GMC jimmy 4.3 liter v6 is Being a ****

check to see if you have your plug wires at the right location on distributor cap. If you don't have a digram they are as follows- right side 1, 3, 5 front to rear. Left side is 2,4,6 front to rear. #1 should be on the location at front of cap closest to intake manifold. firing order is 1,2,3,4,5,6. Hope this helps. KS

Posted on Mar 20, 2009

Ad
  • 79 Answers

SOURCE: octane grade for a 2001 v6 gmc sierra 1500

93 but any will work

Posted on Mar 22, 2009

emissionwiz
  • 76691 Answers

SOURCE: 1993 GMC 1500 4x4 poor shifting

this may be due to a poor connection at the vehicle speed sensor on the transmission, pull the connector off the sensor and clean it with contact cleaner, if the problem persists replace the speed sensor. there are 2 diff ones here is a picture of the most common one for an auto trans.3deea43.jpg

Posted on Mar 26, 2009

cshubart
  • 146 Answers

SOURCE: My Power window on my 2003 GMC Sierra 1500 Truck

if your main switch panel still works the passenger window and if door locks still work probaly bad window motor

Posted on Oct 21, 2009

  • 1608 Answers

SOURCE: 2004 gmc sierra 1500 blower motor location

The blower motor is on the passengers side under the dash.You might have to remove the a lower panel.This is the insulator panel.If the blower works at all just turn it on and follow the noise.Hope this helps.Good luck.

Posted on Apr 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I install the distributor on my truck


Hi,what you need to do is turn the bottom pully to the 0 mark then open the distibuter cap,the router arm should be pointing at number one cylinder,if not turn the bottom pully again untill the 0 is lined up,now the rotor should be pointing at the number one cylinder,if not take the distrib out and turn the rotor and put back in if it inlines with the number one lead then bolt it up so it can still just move by hand,get some one to start it up if it starts then put a timeing light on job done,if its trying to start turn the distrib clockwise if it,if it starts good,if not try turning the distrib anti clockwise,ether way it should start,again put timeing light on and when right tighten up distrib,hope this was some help.

Apr 06, 2015 | Cars & Trucks

2 Answers

Isuzu V6 sparkplug firing order


gee guy, 3.1L or 3.2L?
you only need 3 things to time the distrib. static.
where is #1, its the most forward cylinder, LOOK carefully.
forward means closest to the cam drive end of engine.
not flywheel end.
rotor rotation direction (crank and watch it)
now the order, 3.2l v6? IS It? the single cam?
1990 trooper v6
answering for only USA car...
our 3.2 has no distrib V6 its DIS.






3.1L V6 USA spec. only. rotor is CCW
25147295-nfvz33lg404rkp0tn3ribhht-4-0.jpg

Sep 27, 2014 | 1990 Isuzu Trooper

1 Answer

Truck start fine when sitting overnight (cold or ht weather). after driving for 20 miles or more will barely crank over to start. then after it sits for 45-60 minutes, it starts fine.


the problem that you're having is caused by a code DTC you need to replace the crankshaft position sensor part number 10456607 I have a 94 GMC 1500 v6 this bulletin is on the Internet GM Technical Bulletin reference number 00 06 04 014 I hope this helps good luck

Jan 08, 2013 | 1994 GMC Sierra

1 Answer

My distributor on 94 gmc 1500 5.7 I replace but didn't mark rotor the distributor falls in n the teeth line up together rotor points between 6 n 8 o clock what will happen if its not the rite way


if its off when you go to start will backfire.if your not sure pull number 1 spark plug and then turn engine with bolt on crankshaft put finger over #1 spark plug hole when you feel air slow down and use flash light to see piston coming up when its all the way up stop then put cap on distributor and see where number one wire is mark distributor and then with rotor on stab distrib with rotor pointing at number one your mark you put on distrib housing then put cap back on and should fire right up if it still back fires your 180 drees off meaning when #1 piston was coming up it was on exhuast instead of compression so take cap off see where your pointing good luck its really not that bad

Aug 23, 2012 | Cars & Trucks

1 Answer

1996 GMC jimmy rough idel and dieing when driving.


i have seen many strange things happen with the distrib cabs on these

Aug 22, 2012 | 1996 GMC Jimmy

1 Answer

1980 gmc shut off while driving. no sputter no nothing just died.. battery good.. getting fuel to the carb... getting spark from the plugs.. distrib is good...timing is good... any other reasons for the...


The spark you are getting is to weak.Check and clean the wires from the coil pack.If they are ok then change the coil pack.Then the crank sensor.Hope that was helpfull.

Jul 29, 2009 | GMC Sierra 1500 Cars & Trucks

2 Answers

2007 sierra wont start


Pull the starter out and bring it in to the auto parts store to get it tested

Apr 06, 2009 | 2007 GMC Sierra 1500

2 Answers

Firing Order Diagram


the firing order is
1-6-5-4-3-2

Jul 23, 2008 | 1991 GMC C1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...