Question about 1997 Volkswagen Eurovan

Open Question

A Sharan 1997. The cooling water pump is out of

A Vw Sharan 1997. The cooling water pump is out of order. How do I do when I replace it. Magnus

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 119 Answers

SOURCE: need info on replacing water

Here are step by step instructions:
http://www.autozone.com/addVehicleId,2357104/initialAction,repairGuide/shopping/repairGuide.htm?pageId=0900c152800b01e7

Posted on Jul 26, 2008

  • 5 Answers

SOURCE: VW Sharan 1997

Depending where you live if the temp. is over 45 degrees F the glow plugs shouldn't be needed for the engine to start. Have you ever had the check engine light come on? Your problem is probably not in the glow plugs.

Posted on Mar 14, 2009

  • 1 Answer

SOURCE: VW Sharan 2003 rear washer has stopped working

you need to take out the passenger side light you will b able to get to the connections there hope this is helpful .

Posted on Apr 26, 2009

  • 14036 Answers

SOURCE: Is the transmission sealed on a 1999 VW Sharan?

you need a haynes manual.because some new cars dont have dip stick to check tranny fluid.you have to locate a check fill plug on automatic transmission differential.its located on the right side.front of drive axle.for volkswagon you got buy the tool to squirt fluid in tranny.still get a manual it will show you place to put tranny oil.

Posted on Jul 12, 2009

  • 921 Answers

SOURCE: vw sharan timing belt change?

your getting close to a change, especially if its a belt and not a chain. i know friends that had there belts changed out anywhere from 60k to 90k. Chains can go about twice as long as a belt. i you kept this car up on it servicing and dont abuse it. i"d say it"ll last till at least 70k.

Posted on Oct 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vw sharan 2000 1.9tdi


Is a US model. Is it a van? What do you mean by "Heater Matrix"?

Mar 10, 2014 | Cars & Trucks

1 Answer

Cause of oil pump failurein vw sharan 18t


Bad or contaminated oil - remove the oil pan and check for impurities and water - or low oil level due to a loss thru a leak or the oil hasn't been replaced at the required intervals.

Oct 03, 2013 | Cars & Trucks

1 Answer

Fuse box diagram for volkswagen sharan 1997 2.0 s auto,


This should help:

http://cars.voobay.co.uk/cars/vw-sharan-fuse-box-diagram/20/

Feb 04, 2011 | Volkswagen CC Cars & Trucks

2 Answers

Hi there well done for a great job right my vw sharan 2001 tdi curently is not heating and the water from the engine is not hot when you touch on the pipes they are just warm however the heater gage...


First time you might check the thermostat operating.


Heed of antifreeze coolant temperature!!!


The thermostat location for 2001 VW Sharan 1.9 TDI is on back of the alternator at the bottom side of the bracket.

IMPORTANT NOTE: It is NOT necessary to replace the alternator if you want to change the thermostat !!!

Thermostat checking:
1. Cold engine. Start up the engine and watch of the water temp indicator. After first value 60 Celsius Degree you still warm up the engine until the lifter (pointer) reach 80 C deg. (second mark after 60 C deg.). At this time you let engine running at idle speed and check with your hand the thermostat plastic housing and hose temperature in bottom left side of the engine. Heed of alternator driving belt and ventilator fan !!!
2. If the thermostat is good the hose must be cold until the water temp indicator reach almost 90 C deg.
3. The thermostat opening temperature is 87 C deg.
4. If the hose is already warm the thermostat is out of order.

Thermostat location, Part number: 044121113, in german - "Kuehlregle" (Price around $25):
tdisline_211.jpg


Important note: Always replace the thermostat seal, position 7 in the above picture.


Please do rate my response. Thanks!


Feb 02, 2011 | Volkswagen Touareg Cars & Trucks

1 Answer

I have a vw sharan v6 dual fuel but will not run


The fuel system is switched from L.P. to petrol by use of a solenoid.
The soleniod is operated by a relay.
The relay is electrically protected by a fuse.
Check all 3 starting with the fuse and checking back.
Please let me know what you find.

Feb 10, 2010 | 1997 Volkswagen Eurovan

1 Answer

How to change water pump (1997 sonoma)


The text below is from the GM Service manual 4.3L V6 Engine
Water Pump Replacement (4.3L)
Removal Procedure
Drain the cooling system. Refer to Draining and Filling Cooling System .
Loosen the water pump pulley bolts.
Remove the cooling fan and clutch assembly.

Tools Required
J 46406 Fan Clutch Wrench

Removal Procedure
Remove the upper fan shroud.
Remove the fan clutch from the water pump in a counterclockwise direction using the J 46406 .
Remove the fan clutch assembly.
Remove the drive belt. Refer to Drive Belt Replacement Remove the water pump pulley mounting bolts.
Remove the water pump pulley.
Remove the radiator outlet hose clamp from the water pump.
Remove radiator outlet hose from the water pump.
Remove the water pump mounting bolts.
Remove the water pump from the engine.
Remove the water pump gaskets.
Clean the water pump gasket mating surfaces.
Installation Procedure
Install the water pump gaskets.
Install the water pump to the engine.
Apply a sealer (GM P/N 12346004) to the bolt threads.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Install the water pump mounting bolts.
Tighten
Tighten the mounting bolts to 41 N·m (30 lb ft).
Install the radiator outlet hose to the water pump.
Install the water pump pulley.
Install the water pump pulley bolts.
Tighten
Tighten the water pump pulley bolts to 25 N·m (18 lb ft).
Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 4.3L.
Install the fan clutch assembly.
Fill the radiator cooling system. Refer to Draining and Filling Cooling System .
Inspect the cooling system for leaks.

Oct 01, 2009 | 1997 GMC Sonoma

1 Answer

VW Sharan 2003 rear washer has stopped working


you need to take out the passenger side light you will b able to get to the connections there hope this is helpful .

Apr 04, 2009 | 2003 Volkswagen Eurovan

2 Answers

Over heating


sounds like a waterpump not curculatin well

Feb 13, 2009 | 2001 Volkswagen Jetta TDI

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...