P0106 map sensor code on tdi

Jasmina, for VW code P0106 is the Manifold Absolute Pressurer Sensor(MAP) sensor and can cause the issues you described.
i will post links for you to check out and compare.
to show your appreciation press the helpful button and follow me on fixya for more tips and info.

P0106 MAP Barometric Pressure Circuit Range Performance Problem

https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0ahUKEwjN86bvx_rKAhULuIMKHWtYDpsQFgghMAE&url=http%3A%2F%2Fforums.vwvortex.com%2Fshowthread.php%3F5437331-Persistent-P0106-looking-for-some-diagnostic-help&usg=AFQjCNFw95Y4fLI5tjisHCbOIeLjfDMnag

check engine code P0106 VW Jetta SE 2 5L engine should this be dealer cost

P0106 Code VW GTI MKVI Forum VW Golf Forum VW Golf MKVI Forum VW GTI Forum...

2002 Jetta 2.0l does not have a MAP sensor.

2002 Jetta 1.9l TDi MAP sensor location is at the top of the intercooler just behind the passenger (right) headlamp assembly.

P0106 GMC - Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance

Possible causes - Faulty Manifold Absolute Pressure sensor
- Manifold Absolute Pressure harness is open or shorted
- Manifold Absolute Pressure sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)

Replace bad Engine Coolant Temperature (ECT) sensor. ECT sensor is placed in the right back side of the cylinder head on 2002 VW Jetta 1.9 TDI. See picture below:

Replace the Engine Coolant Temperature (ECT) sensor. ECT sensor is placed in the right back side of the cylinder head on 2002 VW Jetta 1.9 TDI. See picture below:



Please do rate my response. Thanks!

The error code definition reads:

"Catalyst Efficiency Below Threshold Bank 1"





It's possible it might be the oxygen sensor, but it's more than likely the catalytic converter. This is a relatively common code for VW's.

You can google "p0420" and see the posts...

this a map sensor, probably just need the sensor replaced, it measurese intake vaccum and adjusts air/fuel mixture accordingly

http://www.pdfoo.com/result-jetta-fuse-diagram.html

Follow this link and there is a fuse box diagram there

the computer doesn't say replace the sensor, it says that there is a problem in the sensor circuit, that can be the wiring, the PCM or the sensor, u must check all three.

Hi, I have a 2001 polo 1.4 mpi it lackes power when you hit a hill it just dies, It has had new cat, fuel filter, fuel pump and throttle body, but is still the same it just dose not want to give me full rev's?