Question about 1999 Chevrolet Silverado 1500

1 Answer

Key fob stopped working the door locks. I changed

Key fob stopped working the door locks. I changed the battery and tried to resynch, but the key fob won't work the locks. Power locks on door still work.

Posted by on

  • Anonymous Mar 15, 2014

    Door locks work fine with fob, but not from switch on door.Battery was replaced a few days ago,I just bought this truck

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 32 Answers

The circuit boards on those factory remotes, sometime break where the battery is clipped in, check to make sure the solder is holding the clip properly and it is not loose, also they remote may need to be programmed to the vehcile with a scan tool, usually only found at GM, Also the rubber part of the remote on the inside where the pad touchs the circuit board, uses a small screwdriver and touch the exposed circuit, if the remote locks the doors, try putting in tiny peice of alumumn tape of the inside pad, the connectiveness of the rubber wears off. If not try above or dealer.

Posted on Oct 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2007 ES 350. Changed key fob battery,now nothing works. Only immobilizer security light is flashing and engine start stop button has amber colored light on


Be sure to use the correct battery, properly in place, clean the key contacts , See owner's manual for additional information.
There are specialized locksmiths for car keys

Oct 02, 2014 | 2007 Lexus ES 350

1 Answer

I need to disable an immobiliser on my mg/tf car


If your key fob has just stopped working try this:

  1. Unlock your vehicle with the key in the drivers door lock, do not open the door.
  2. Press the right hand button lock button (the button with the padlock symbol or the dimpled button) on the key fob 4 to 8 times.

If the above fails try this:

  1. Open the key fob
  2. Remove the battery
  3. Press any button 10 ten times, and the same with the other button
  4. Refit the battery or a new battery
  5. Unlock the vehicle with the key in the drivers door lock, do not open the door
  6. Press the right hand button lock button (the button with the padlock symbol or the dimpled button) on the key fob 4 to 8 times

Nov 15, 2012 | MG TF Cars & Trucks

2 Answers

I have a 1999 E320 Mercedes and one of my key fobs stopped working so I replaced the batteries in it and when I prees the button now the red lite indicator comes on but nothing happens? My spare one is...


IT WORKED!!!! The manual on my 99 ML430 to "Resynching Remote Key" was just written weird.

It says "Turn the key in the ignition to 2nd position then back to 0. Press and hold the lock key for 15 seconds... now press the unlock key 5 times"... which I held down the lock button for 15 seconds, released it, then pressed the unlock key 5 times. NOTHING!

The newer manuals say press and hold the lock key and press the unlock key 5 times (with the lock key still held down).

So... it worked. Hope this helps!

Oct 04, 2010 | Mercedes-Benz E320 Cars & Trucks

3 Answers

My Porsche Key fob no longer unlocks the doors


Insert key into door barrel or ignition lock and turn key, whilst doing this press the unlock/lock button, the led on the dash should flash to indicate this has initialised the key to the car, then remove key and test operation of remote. If this fails then a new remote plus coding to the car by your dealership is needed

Feb 16, 2010 | 2005 Porsche 911

2 Answers

Key fob lights up but doesn't work even with a new battery


I'm more familiar with Range Rovers and Saab's when it comes to key fobs but if you changed the battery you have to re-program the key fob. If you do not have an owner's manual that can take you through the steps you might want to try: push and hold the lock button on the key fob, put it in the driver's side door and turn to lock. With the button still depressed turn back to open, remove the key and release the button. If this doesn't work check any and all fuses associated with your system and last but not least you could take it to a dealer. Good luck!

Aug 25, 2009 | 2000 Renault 181

1 Answer

The right way the batteries should go in key fob


If you look very closely at the lid for the transponder the positive and negative symbols are shown.On the batteries themselves you will see the markings. Once you get them installed hold your lock or unlock button and make sure you infrared light is illuminating in the clear lens There may even be an l.e.d that illuminates. The problem is probably your synchronization. Put key in the door tumbler and turn it. then remove key and attempt to use central locking. You may find you have to put it in the ignition and turn to position 2. The resynch. procedure should be in your owners manual. Hopefully the vehicle starts and you didn't knock the microchip out of the key as well. Hopefully I have been helpful

May 25, 2009 | 1996 Mercedes-Benz E-Class

1 Answer

How do i reprogram my02 ford focus remote locking key fob please.


get in your car close door hit the unlock button then put key in the ignition cycle the key from off to on (STOP BEFORE START POSITION) cycle key off to on 7 times after the 7th trime the doors should lock the unlock automatically that means u are in trainning mode hit the unlock button on key fob. the key fob should now work if it doesn't then try changing batt

Nov 27, 2008 | 2001 Ford Focus

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

609 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...