Question about 1987 Peugeot Liberte

2 Answers

No diesel fuel getting to the engine on citroen xantia what do i need to check and where on engine is fuel filter

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Peugeot Expert
  • 274 Answers

The fuel filter should be on the fronnt right of the head (black canister with 4 allan key bolts on top) or front center of the head(oval unit)
it is possable that the fuel pump has gone down or the fuel cut off switch has been activated this is located on the n/s/f inner wing on the top strut mount

Posted on Dec 10, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 600 Answers

Can you locate the injector pump? get someone to turn the ignition on and off and listen for a light click, this should be the fuel solenoid, it shuts the fuel off to stop the engine. usually this is located just above where the injector pipes come out of the right side of the pump. If there is no click try and check the wire coming out of it, on later ones the wire is mixed in with others in a small harness to confuse would be thieves and to work with the immobiliser.If there is no power going to it the engine will never start, it works on battery voltage so you could run a wire to it and try. If that works the immobiliser or wiring is at fault

Posted on Oct 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Citroen xantia forum


Find the central locking box and remove wire connected to Remote alarm box.

Aug 06, 2014 | 1998 Citroen Xantia

1 Answer

Citroen xantia electrics are shorting out


If it's an automatic, check if the lever is at P or N. Check if your car has immobilizer that needs you to enter codes before it will start. Gauges moving full scale usually indicates that the instruments cluster is 'missing' an additional IGN supply. When you turn your key to the ON position, all lights in the cluster will light up. This position will make the ignition switch supply 2 IGN power to most electrical systems. If one is missing, the car may not start. Check all fuses under the fascia and in the engine bay. Be on the look out for fuses that have melted 'seats'. They may give intermittent power. Xantia's fuse slots gets melted with age, so the fuse becomes loose and supply gets disconnected.

Mar 23, 2014 | 1998 Citroen Xantia Break

1 Answer

Citroen xantia alarm & stop light on dash


PSA cars with analog instrument clusters have the STOP light to alert drivers of irregularities in engine temperature or coolant that may cause severe damage to the engine. Check your radiator coolant level and top up when it's low. Don't forget to bleed the air from the cooling system. If problem persist, check for loose connectors to the Coolant Temperature Sensor(mounted on the cylinder head) and the Coolant Level Sensor (mounted on the side of the coolant refill tank). For the alarm, check ALL door switches including those for the front hood and the rear trunk. They may be shorted to earth or one of the door becomes ajar. Next time the alarm triggers, check which door looked like it's slightly opened. If so, realign the door hook located in the door pillar.

Sep 09, 2012 | Citroen Xantia Cars & Trucks

1 Answer

Citroen Xantia AUTO 2.0 alert lights cold (sport and snow lights)


The S light is also used like a 'check engine' light for auto transmission. There maybe some error in the transmission control system. You transmission has a computer that controls a lot of valves and solenoids in it. Check your transmission fluid level and it's integrity. If you have not changed the fluid for the last 50000kms then it's due for a change. Use only Peugeot recommended fluid. Other fluids will damage it. Mention your transmission type when buying. It's either AL4 or 4HP20. Best to buy it from authorized dealer. Garages that have a Lexia 3 scanner can scan for error codes for the transmission.

Aug 20, 2012 | 1998 Citroen Xantia

1 Answer

2.1 i stalling


Your fuel injection pump may need to be re calibrated. Check,clean or replace fuel filters if not done yet. Check pre-heating circuit runs properly. Diesel train tends to get ingested with water more frequently. Drain fuel filter of any water.

Apr 19, 2012 | Citroen Xantia Cars & Trucks

1 Answer

Where are the glow plugs situated on a citroen xantia diesel 1995


front of the engine on cylinder head.no 1is right behind injection pump

Jun 08, 2010 | 1991 Peugeot 405

3 Answers

Pressure buildup in cooling circuit of my xantia 1,9 diesel. no heated air inside car bubbles in radiator when lid turned open. no temperature reading on instrument on dashboard french car citroen xantia...


Combustion gas bubbles in the radiator coolant indicates a blown head gasket.
Take it to a radiator shop and get a combustion gas test to confirm.
Most likely will need cylinder head removed for inspection and replacement gasket fitted.
Absence of temperarure indication on dashboard may be due to electrical problem - check connections to temperature sensor etc.

Dec 05, 2009 | 1991 Peugeot 405

2 Answers

Citroen Xantia Temperature warning light


I think there is air trapped in the radiator. Remove the level semsor in on the radiator and make sure you fill the water from there first, fit it back and then remove the expansion tank and hold it higher in the air and make sure youget clear running water at the air bleeders. Cheers.

Mar 27, 2009 | 2005 Peugeot 405

2 Answers

Citroen xantia fuel pump relay


If the pressure is up the pump will not cut in anyway! slacken off a fuel line to the injectors a little and drain a few cc of fuel out (it will evaporate fast) then try again, if the pump runs for a couple of seconds then look at the spark, if it doesnot the relay is above the fuses.

Feb 27, 2009 | 1987 Peugeot Liberte

Not finding what you are looking for?
Cars & Trucks Logo

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...