How to start without a key - 2006 Ford Explorer

I'm sorry, but it is not possible to start a 2005 Ford Focus SE without the key chip. The key chip, also known as a transponder key, is a security feature that prevents unauthorized access to the vehicle. Without the key chip, the car's engine immobilizer system will prevent the car from starting.

If you do not have the original key with the chip, you will need to obtain a new key with a chip from a Ford dealership or a qualified automotive locksmith. They will be able to cut a new key to match the locks on your car and program the new key chip to work with your car's immobilizer system.

Please note that attempting to start the car without the key chip or trying to bypass the immobilizer system may cause damage to the car's electrical system and could potentially lead to other issues. It is important to have a proper working key chip to ensure the safe and reliable operation of your vehicle.

You can't. The security system and immobilizer is there to stop EXACTLY what you are trying to do, start the car without the key and security code credentials.

Your local dealership with make you a key based on the VIN Number. Then you have to reset the security system.

Or you can try a local mobile locksmith.

Or find the key. If you lost the key in the snow, look up 'Ring Finders', a global network of metal detectorists that find lost rings and keys.

You can't . The ignition switch does more than just start the engine. The key code can usually be read from the diagnostic connector.

needs new key switch lock is broken

Replace the ignition switch

You'll have to have the car towed to a dealer, or call a locksmith that has the equipment to do it at your house. The key has to be cut to fit the lock, then the computer has to be programmed to accept the new key code.

Yes, this is the vats antitheft system. Your car will not start until you hanger the correct chip key or bypass the system. This link should help

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Check your starter solenoid or your ignition switch, sounds like there is a short causing the car to start when the weather changes

you can't start the vehicle without taking it in and having a new key programmed to it- you can have a key made- it will unlock it and turn in the ign. but will not start without programming- your ford dealer may be able to get the key code for the vehicle but most likely you'll also have to purchase a new ign. cylinder and have 2 keys made because it takes 2 keys to program after an erase. hope this helps, good luck

ok get in the car, close the door, make sure all doors are closed.... put the key in the ignition, turn the key to on but without starting the car (lights on dash light up only) press and release the key lock button, turn key to off, without removeing the key.. turn to on without starting the car (dash lights up only) press and release the key lock button again, turn the ignition off, without removeing the key then turn back on (lights on dash on only without starting the car, press and release the key lock button , turn off the ignition without removeing the key, ..turn on the ignition once more without starting the car , press and release the key lock button and u should hear the door lock cycle ....leave the key in the ignition ... now press the lock button or unlock button on the other remotes one at a time if u have them.....u should hear the lock cycle indicateing all remotes are programmed.... kind of tricky to explain but you will get it, the sequence of turnin the key in the ignition on and off is only done with that one first key,,, remember after the door lock cyles press the lock or unlock button on the other remote fobs if if any...and ur done..may take u a few trys.. let me know how it worked out.