Question about 1998 Jeep Cherokee

1 Answer

I have a 1998 jeep cherokee sport when taking off the old deck forgot to unplug my battery andwhen cutting one of the wires (not sure which one) and got a spark and all the interior lights shut off $and the gauges to looked at all the fuses and they seemed to be fine is this a wire problem what happened

Posted by on

  • forrestjmart Sep 28, 2009

    its a pioneer i was cutting them because the previous owner had installed the deck my themselves and i couldnt disconnet the wires from one another so i could connect my new deck wires

×

Ad

1 Answer

What is an old deck? Why would you be cutting wires

Posted on Sep 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1996 grand cherokee limited. started bogging down when i step on the gas had to speed up slowly to get to work. than i tried to start it the motor would turn but would not start.


I just had this problem with my 1996 jeep cherokee sport. Last couple of days. Had the battery checked......good battery. It turs out I have a spark plug wire that is cracked. Causing the engine to cut out and miss and the car not to start. 20.00 fix.

Jan 25, 2013 | 1996 Jeep Grand Cherokee

1 Answer

How to fix error code p1391 on 1998 jeep cherokee sport


did you erase the code? if code is not cleared it acst same way even if you installed a new sensor.

if not cleared, you can do either using obd2 scanner or you can just try to disconnect (-) of your battery for 15 minutes. it i will relearn every thing after 2 or 3 warm ups, and will start to idle ok.

Nov 18, 2011 | 1998 Jeep Cherokee

1 Answer

1998 Jeep Cherokee sport, keeps blowing brake light fuse. if I take the bulbs out the fuse doesnt pop but as soon as i put the bulbs back in and hit the pedal it pops.?


Check wire from fuse to light,there is short somewhere, also check light connector, has the car been in an accident lately?

Sep 30, 2011 | 1998 Jeep Cherokee

1 Answer

New battery but volt meter on empty


did you check charging system a simple way start car unplug negative cable from battery while car running take off cable if car stops charge is not working could be bad alternator burnt main fuse to bat broken wire etc it is better if you have a voltmeter to check the power to battery for sure diagnostic

Jan 07, 2011 | 1998 Jeep Grand Cherokee

4 Answers

1998 jeep cherokee sport- i get a code p1682.


P1682 - Charging system voltage to low.

Nov 23, 2009 | 1998 Jeep Cherokee

1 Answer

So i was replacing my old cd deck and forgot to unplug the battery and while disconnecting the wires then i got a spark and at the interior lights shut off and now the door controls wont work then i looked...


In the engine bay, there is some more fuses located in a black plastic box.This also has relays in it.Right hand side of engine bay.Its probably one of these fuses.Hope this helps

Sep 28, 2009 | 1998 Jeep Cherokee

2 Answers

1998 jeep Cherokee Sport wont start


Sounds like your battery is way down. have it checked/charged and load tested. then have the charging system tested after you get it started.

Sep 28, 2009 | 1998 Jeep Cherokee

2 Answers

Major Short Curcuit?????


SUPER easy to fix. you shorted out one of the fuses. refer to the owners manual and replace whichever one belongs to that circuit. i know a main circuit box (for the TJ & YJ) is located behind the glove box. might be in the same spot on the cherokee.

gook luck, doesn't sound too back. one thing i have learned with wiring. CHECK the FUSES first. i have my whole dash and ignition column ripped apart when all the problem was, was a blown fuse and a corroded battery post...

cheers

Sep 27, 2009 | 1998 Jeep Cherokee

2 Answers

Positive battery cable replacement


Just take your time and make sure your batter isn't in the car. Be careful not to cut into the copper wires. Just try to make it look as close to factory as you can and in the same pattern.

Jul 21, 2009 | 1998 Jeep Cherokee 4WD

1 Answer

1998 Jeep Cherokee Sport Ignition Lights Come on but wont crank


Try putting the car in neutral and starting. If its a manual trans it might be the clutch pedal safety switch or it may be something as simple as a loose battery connection.

Feb 03, 2009 | 1998 Jeep Grand Cherokee

Not finding what you are looking for?
1998 Jeep Cherokee Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...