Question about Honda Accord

1 Answer

In park i can put to the floor and it will go to around 3ooo rpm and drop to 500 or so and do it continuously up down up down,,,and also when in drive it start fine goes fine till ya punch it and it just bogs....wahhhhhhh it dies sometimes. i had the engine light on checked and they said the O2 sensor was needing changed...that light has been on for a while and this is just starting thanks

Posted by on

Ad

1 Answer

First not to be hurtfull but find a good repair facility and scan for codes FIRST. Then have all code related issues PROPERLY repaired. You can not pass inspection in most states with check eng light on. Again it comes on for a reason. I hope you replaced the 02 sensor IF that was an issue. Second you have now gotten another or multiple things to troubleshoot. There is no excuse for driving with check eng light on and hopefully no harm done. The 02 sensor will hurt your mileage and a rich condition will ruin your converter and cost you

Posted on Sep 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 chevrolet impalahave a 07 impala runs great till ur rpm meter goes past 4000rpm then drops down to 0 runs bad after shut down engine for around 10 mins then runs good again check with scanner no


It needs a scanner on it to find the problem while driving it. Several things can cause this. At 4000 rpm's in park the ecm will suppress the engine. this would be the Neutral safety switch. So going from there, if not the switch, it could be wiring or a bad buffer in the ecm.

Oct 16, 2014 | 2007 Chevrolet Impala

1 Answer

Toyota corolla hatch 2002 idle at 2000 rpm when


All the above is normal , except 2000rpm is a little high at idle . can be adjusted down to 1500rpm. the computer adjusts the engine speed . in drive the transmission loads up the engine idle drops to 1000rpm . in park engine unloaded rpm increase all normal.

Sep 17, 2014 | Cars & Trucks

1 Answer

Pops or coughs


Check your air filter and spray clean MAF sensor.

Apr 07, 2014 | 2006 Subaru B9 Tribeca

1 Answer

Volvo 240 stalls unless giving it gas


Check the rpm in neutral should be around 800-850, this should drop to 500-550 in drive or reverse.

Mar 17, 2014 | Volvo Cars & Trucks

1 Answer

My 1997 ford f150 starts fine, but has a high idle while stopped usually about 1200. Sometimes the idle will drop to about 400 and the truck almost stalls. Help?


To be honest no idea with my head under the bonnet and having a play to see whats wrong ,could be anything from a vacumn pipe to faulty sensor .

Dec 12, 2011 | 1997 Ford F150 Regular Cab

1 Answer

I have a 2001 doge dakota sport rwd and the rpm's are low, some times the truck will stall shifting from reverse to drive. idels around 500 rpm and drops to shift out of park or neutral. can you please...


Most likely need to clean your IAC sensor, dodges are notorious for having this prob, depending on your engine, it should be on the rear of your throttle body held in place by 2 torx screws

Jan 01, 2011 | 2001 Dodge Dakota

1 Answer

Start car and the idle goes to 3000 rpm, holds there for around 12 seconds or so and then comes down to around 1200. when driving if stopped and you put the car in park or nuetral the idle will go up to...


it sounds like a vacuum leak to me, my car had the same problem but when i changed the hose that connected the valve cover to the fuel injectors the rpms dropped back down to about 800 rpms

Sep 17, 2010 | 1999 Saturn SL

1 Answer

Some times my 1984 ford f150 idels fine when its in park(some times)but when i put it in drive or reverse idel drops about 500 or so rpm sputters for a little bit and then dies. Some times it runs fine...


In general, yes. This is a carb tuning issue. Another possibility is a vacuum leak somewhere, but most likely, it's a carb issue. You'll typically see your rpm drop a bit when you put it in gear, but that it sometimes stalls out points to a carb issue.

May 20, 2010 | 1984 Ford F 150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...