Question about 1987 Toyota Celica

Open Question

I need to remove the back struts on a 1987 toyota celica convertible it looks like to remove them is in the back seat side panel is that right ??? help,,,,

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need to know what steps needed to remove left 1/4 glass on my 1999 celica convertible

take out the back seat-lower and also the seat back-remove the trim card and you should be able to access the bolts that hold the glass onto the regulator-cheers Denny

Nov 10, 2013 | 1999 Toyota Celica

1 Answer

Were is the fuse box inside the 1987 toyota celica gts?

Try looking under the hood around the driver side by the wheel well. Or on the driver side under the steering wheel, or slightly to the left of it.

Jul 11, 2012 | 1987 Toyota Celica

1 Answer

How to remove back seat panel on 2000 toyota celica

Start by taking out the back seat, top and bottom. Then look for any screws in the side panel that need removing. Earlier celicas did not have screws. The panel was fitted by locking in behind other trim pieces- like the door trim pieces. You should be able to pull the panel fairly easy, once the back seat is out of the way.

Jul 08, 2012 | Cars & Trucks

1 Answer

How do you replace the rear shocks in an 01 Toyota Celica gt


Apr 18, 2010 | 2001 Toyota Celica

1 Answer

How do I get the trunk struts off my 1999 Toyota Celica?

should have a clip you remove,if it does't the new ones come with a new ball.just unbolt the bracket

Apr 04, 2009 | 1999 Toyota Celica

1 Answer

1987 Toyota Celica ST half shaft

pull wheel, remove nut on half shaft, calaber, brakes, roader, tie rod, lower control arm, pop out half shaft from knuckle reinsert shaft to tranny and put back together easy looking about an half hour to an hour

Feb 23, 2009 | 1987 Toyota Celica

1 Answer

HOW DO I REMOVE rear speaker panels from 1994 celica???

  • remove the hinged brackets for rear seats remove locking bracket too
  • open front door carfully pull up plastic scuff plate
  • lift rear seat (push clip in centre of each seat)
  • push back the panel hard from door piller
  • pull panel out at bottom and puch down top of panel.Pig of a job but can be done.

Feb 15, 2009 | 1994 Toyota Celica

1 Answer

Changing rear struts

You need to remove the rear seat bottoma and the rear seat backs. Then, remove the inner panels that are on either side of the rear of the car. Then you will see the top bolts.

Jan 12, 2009 | 1996 Toyota Camry

1 Answer




They might be able to help you.

Sep 24, 2008 | 1987 Toyota Celica

1 Answer

Convertible leaks

Look for a plugged drain at both rear side panels. Water from the top can enter the car, but it is then discharged out thru drains. If the drains are clogged, you will have this problem. Same for any other Toyota convertible.

Aug 24, 2008 | 1998 Toyota Celica

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides