Question about 2002 Pontiac Sunfire

2 Answers

Putting on the surpentine belt

I had to chang the idler pully, it had been squeeling, so I have that on , now to remeber how to put on the belt... Thanks

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 439 Answers

I could get it for you if you let me know the type of engine your car has. The manual & diagrams can be found at autozone once you log in, add your vehicle and search for that part there will be a column on the right of page with repair manual & diagrams.

Posted on Sep 28, 2009

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Either under the hood towards the front or on the top of the radiator support there shold be the routing sticker. If not the same diagram in in the owners manual.

Posted on Sep 28, 2009

  • tsgreenwald Jul 18, 2011

    Its not in the manual I looked

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After changed a new water pump,timing belt,idler pully,tensioner for 2004 lexus ls 430, when start engine has a noise look like from pully


COULD BE A BAD BEARING IN THE IDLER PULLY OR THE TENSIONER ON THE TIMING BELT OR THE SERPENTINE BELT. IF ITS A SQUEEL IT MAY BE SOME COOLANT GOT ON THE SERPENTINE BELT. TRY TO WASH THE BELT WITH WATER AND LET DRY COMPLETELY. IF NOISE REMAINS RETURN TO THE SHOP THAT DID THE WORK.

Jul 17, 2012 | Lexus LS 430 Cars & Trucks

1 Answer

I have a 2001 Sonata. I have a squeeling pulley.


It sounds like you have a worn or streched belt making the sqeeling noise. Whenever you turn on a
device in the car that draws a fair amount of voltage
ie. a/c or headlights it will cause increased drag on
the alternator and if you have a loose/worn or glazed
belt, it can slip around the pully making the squeel.
To adjust the alt-a/c belt loosen the mounting bolts
on the tensioner, then use the adjuster bolt behind
the tensioner pully to loosen and tighten the belt.
Be sure to check the belt for cracks bald spots etc.
While the belt is loose spin the pullys to make sure
they all spin freely. Also I would replace the belt just
to be sure. Hope this helps

Jul 04, 2010 | 2001 Hyundai Sonata

1 Answer

Need to know how to put a serpentine belt on a 1995 302 ford motor


Below the altenator is a tensioning pully, insert a 3/8" ratchet or breaker bar in the square hole on the tensioner and release the tension on the surpentine belt and remove the belt. Route the new surpentine belt in place up to the altenator and take the tension off the tensioner and put the belt over the altenator pully. Double check to make sure the belt is riding correctly on all the pullies before starting. Crank the engine over several times before starting to seat the belt. f78f558.jpg

Jun 02, 2010 | 1995 Ford Mustang

1 Answer

How to replace the surpentine & drive belt for Town ace - Toyota


you are going to need i believe a 15 or 17 mill box-end werench. Find the tensioner pully. it looks like two small pulleys attatched by an aluminum bar. put the wrench on the pully that dosnt move that looks like it is bolted to the engine and pull one way ot the other and it will loosen the belt. Under your hood there should be a white sticker with a diagram on how to put the new accessor/ serpenitne belt on. If you are having troubles before you try this go to your local autozone or checker auto parts and have them show you. Usually they are nice enough to help out.

Jan 26, 2010 | 2003 Toyota Corolla

1 Answer

My 2005 dodge 2.0 sx chirps when starting but does not squeel do I just need to replace the belt or is the idler pully gone to


A slight squeel when starting is most likely a loose belt which just needs tightening up. If it was the pulley the sound would not stop.

Nov 06, 2009 | 2005 Dodge Neon

5 Answers

How do I loosen and tighten the surpentine belt that runs the alternator amongst other items?


there is a spring tensioner on the mid area. you will need a serp belt tool to unload it.

Jul 02, 2009 | 1999 Dodge Caravan

2 Answers

How do i change the fan belt


well has soon as you loosen and take out the alt the belt will become loose then put alt on it will slide down to put belt around and then pull up on alt and tighten it up

Jan 25, 2009 | 1988 Mazda B2200

1 Answer

Surpentine belt.


depends on which v8 you have....the 4.7 the routing is as follows it goes under the waterpump pully over the alternator down and around the power steering pumpto the crank...it goes under the bottom of the crank to the idler pully.the flat side of the belt goes ver the idler then around the automatic tensioner to the ac compressor.
on the 5.2 and 5.9 it routes starting at the idler pully the flat side goes undr the idler the up to the ac compressor around the compressor and down to the power steering pump ... around power stering pump to waterpump where the flat side is against waterpump pully around water pump down and around crank up it automatic tensioner....around tensioner and up and over alternator

Nov 30, 2008 | 2000 Dodge Durango

1 Answer

Surpentine belt


Well first check your owners Owners manel. Also there is usual directions on were the belt goes under the hood so check there.

Oct 20, 2008 | 1991 Chevrolet S-10

Not finding what you are looking for?
2002 Pontiac Sunfire Logo

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...