Question about 1997 Subaru Outback

2 Answers

Disconected my battery cables.......lights flash

Disconected my battery cables(97 subaru outback legacy).......lights flash upon re-coneccting, and now they won't stop.....what do I do?

Posted by on

  • tastetheburn Sep 28, 2009

    No, all that stuff is fine.........apparently I needed to reset the computer. Find the reset button next to the keyless entry box............hold it, while turning the key to the on position (do not start car!)...............doors lock and unlock three times and problems solved.........
    Thanks for the reponse though!

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Couldn't locate the reset button on my 97 Outback. But I found that if you just use the remote to lock / unlock the car doors, the lights stop flashing. Simple.

Posted on Oct 13, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Regulator is bad or alternator is going out.

Posted on Sep 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 Subaru legacy won't start and locks do not work. Battery is good and all fuses are fine.


take your ground wire off the battery and clean it with a wire brush it sounds like a ground problem

Dec 06, 2012 | 1997 Subaru Legacy

1 Answer

97 subaru outback 2.5- just checked the trouble codes after check engine light went on. what could be causing radiator fan problem?


Faulty cooling fan relay, faulty coolant temperature sensor, or the fan assembly itself is defective.

Feb 23, 2010 | 1997 Subaru Legacy

1 Answer

97 subaru legacy outback 2.5 vibration only at idle in gear


I would suspect a mount. Either motor or trans. Also check lateral mount on top of motor to firewall. Good luck and have a great day.

Feb 10, 2010 | 1997 Subaru Legacy

1 Answer

'99 subaru legacy gets 2 flashes from LED and


try opening door and holding unlock button ,it sounds like its in valet mode

Jun 15, 2009 | 2001 Subaru Outback

1 Answer

97 Subaru Legacy Outback AWD has electric pain.


Hello:
Sounds like the dasboard ground isloose. Usually located at one end or the other snd attached with screws from metal dash frame to metal in body nearby. very short wire or a srip of stainless steel braiding.. iThe consol is also grounded. Good luck

May 14, 2009 | 1997 Subaru Legacy

1 Answer

97 outback legacy; won't start


not sure if this will help, but I recently changed the engine in my subaru and changed battery + starter also. Would start but then not restart once warmed up. Turns out the engine ground got forgotten, had that hooked back up after banging my head on a wall for a week and it runs like new

Apr 05, 2009 | 1997 Subaru Legacy

1 Answer

97 Subaru Legacy GT Alternator Voltage Output


Battery is probably on it last legs... alternator sounds normal.

Dec 26, 2008 | 1997 Subaru Outback

1 Answer

My running lights will not turn off unless I unhook the battery.


Subaru Outback Legacy Flashing
Q. I have a 1996 Subaru Outback Legacy AWD manual transmission. the hazards flash when I turn the car off. I tried to reset the system by pushing the little black button under the drivers' side dash but it won't reset the system. I had problems with the brakes so I did not drive it for about two months and when I tried to start the car the battery was dead.
mechanic.jpg Now the brakes are fixed but the hazards won't quit flashing and the guy who repaired the car said I needed to reset the system by pushing the little black button. And I don't know if I should have it looked at, or change the battery, or if it is something very simple I can fix by my self.
Thank you very much,
Patrick
A. Patrick, you are the third person in the last two days that has come to me with this same exact problem under the same conditions. As of now I don't have any concrete information on this, but I believe the problem to be in the alarm system.
I believe the battery being disconnected or dying does something to the Anti-theft and Alarm System module and having a Subaru dealer reset the system will correct it.
If you do this and it works, please, let me know and I will pass the information on to the others.
Added 11/7/2003
Dear Mr. Ciulla,
I read your Q&A titled "Subaru Outback Legacy Flashing". I recently had the same problem on my 1996 2.5 liter Subaru Legacy Outback and your response is correct but I can give you a little more detail on what worked for me to stop the light flashing (which occurs sometimes if the battery had been dead):
There is a black reset button under the I/P near the anti-theft module.
  1. Turn ignition on
  2. Hold button 20+ seconds (door locks will lock/unlock 3 times)
  3. Turn ignition off
This also resets the key FOB so as step 2.5 you should also press the "lock" button on the key FOB before releasing the black reset button (door locks will lock/unlock one more time--do this with each key FOB you own). That's all!
The questioner in your Q&A said he tried the reset button; I suspect he either didn't turn the ignition on/off or didn't hold it in for over 20 seconds.
PS... pulling the door lock fuse will stop it temporarily if you can't get the above to work and have to take it to the dealer
Regards,
John
subaru.jpg
Photo Courtesy John Spieth ©2003
Additional Information provided courtesy of ALLDATA

Nov 26, 2008 | 1998 Subaru Legacy

4 Answers

Hazard lights flashing


I have a 97 subaru outback and encountered the same problem. It is a security device on all newer subaru's. After changing or charging the battery, leave the negetive battery cable disconnected. Turn the key to the "on" position, then reconnect the negative terminal. This will stop the flashing.

Jul 06, 2008 | 1998 Subaru Forester

Not finding what you are looking for?
Cars & Trucks Logo

414 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...