Question about 2005 Suzuki Forenza

1 Answer

Intake air duct leak

Check engine light came out, got a reading at auto zone and it gave me troubleshooting code P2279 which says The ECM has detected the estimated volume of air exceeds the expected value. Any suggestions on how to fix this?
It gave probable causes of:
1. Check for vacuum leak
2. Stuck or damaged throttle body or IAC valve
3. Check EGR system

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

All of those codes will come up as probable cause. The hand helds that auto stores use are not accurate. You need a certified mechanic with a Genesis , Snap On or a Mac scanner or the dealership. The actual problem could be causing any of these codes.

Posted on Sep 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My audi tt engine light came on aa bloke got codes p2187 p2279 p0507 p0441 p1093


P2187: System Too Lean at Idle Bank 1
http://www.autocodes.com/p2187.html

P2279: Intake Air System Leak
http://www.autocodes.com/p2279.html

P0507: Idle Air Control System RPM Higher Than Expected
http://www.autocodes.com/p0507_audi.html

P0441: EVAP System Incorrect Purge Flow
http://www.autocodes.com/p0441_audi.html

P1093: Fuel Trim 2 Bank 1 Malfunction
http://www.autocodes.com/p1093_audi.html

Nov 06, 2016 | Audi Cars & Trucks

1 Answer

What is order of troubleshoot for cylinder misfire P305?


Possible causes
- Faulty spark plug 5
- Clogged or faulty fuel injector 5
- Faulty ignition coil 5
- Fuel injector 5 harness is open or shorted
- Fuel injector 5 circuit poor electrical connection
- Ignition coil 5 harness is open or shorted
- Ignition coil 5 circuit poor electrical connection
- Insufficient cylinder 5 compression
- Incorrect fuel pressure
- Intake air leak
What does this mean? What does this mean?
Tech notes
The P0305 code means that the cylinder 5 is misfiring or is randomly misfiring. Start by checking for intake leaks an if no leaks are found the next step is to replace the spark plugs on cylinder 5. If the problem persist more tests needs to be done to diagnose problem, see "Possible Causes"
What does this mean? What does this mean?
When is the code detected?
Engine Cylinder 5 is Misfiring.
Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/loss of power
- Hard start
- Engine hesitation
P0305 Jaguar Description

When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, the Engine Control Module (ECM) can determine that a misfire is occurring.

Read more:
P0305 Jaguar Cylinder 5 Misfire Detected

May 06, 2015 | 2007 Jaguar X-Type 3.0 Sedan

3 Answers

2003 Nissan Altima 2.5L Service Engine Soon Light is on, Auto Zone says codes are for MAF and O2 Sensors. Car hard to start after driving a while but when starts appears to run smooth. Auto Zone thi


ok lets start with the codes they say your getting. P??? which 1's and how many. there are few o2 sensors, are they next to the Exhaust next to the converter? MASS AIR FLOW -MAF use this, for now i am guessing, until i see the correct codes your are getting. this could be the 1 you may have below, please read it........
  • P0103
    Mass Air Flow Sensor Circuit High Input
  • Possible causes
  • Faulty mass air flow sensor
    - Intake air leaks
    - Dirty mass air flow sensor
    - Dirty mass air filter
    - Mass air flow sensor harness is open or shorted
    - Mass air flow sensor circuit poor electrical connection
  • Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor.
  • possible symptoms Engine Light ON (or Service Engine Soon Warning Light)
    - Engine stall
    - Engine running rough
    - Excessive fuel consumption
    - Excessive smoke
  • the code is generated when An excessively high voltage from the sensor is sent to Engine Control Module (ECM).
2003 NISSAN Altima Sedan OBDII Codes List

Oct 22, 2014 | 2003 Nissan Altima

3 Answers

Engine code p110


P0303 Code - Cylinder #3 Misfire
P0110 DTC - IAT Circuit Malfunction
P2195 O2 Sensor Signal Biased/Stuck Lean (Bank 1 Sensor 1) Code
Potential causes of a P2195 code include:
p2195
p219521
  • Oxygen (O2) or A/F ratio sensor or sensor heater malfunction
  • Open or short in O2 sensor circuit (wiring, harness)
  • Fuel pressure or fuel injector problem
  • Faulty PCM
  • Intake air or engine vacuum leaks
  • Faulty fuel injector(s)
  • Fuel pressure too high or too low
  • PCV system leak/fault
  • A/F sensor relay faulty
  • MAF sensor malfunction
  • ECT sensor malfunction
  • Fuel pressure too low
  • Fuel leak
  • Air suction in air intake system
  • A code P0303 may mean that one or more of the following has happened:
  • Faulty spark plug or wire
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Running out of fuel
  • Poor compression
  • Defective computer
  • Potential causes of the P0110 DTC include:

  • po110
    • IAT sensor shifted out of airflow
    • Bad IAT sensor
    • Shorted to ground or open on signal circuit to IAT
    • Open in ground circuit to IAT
    • Poor connection at IAT (backed out terminals, broken connector locks, etc.)
    • Bad PCM

Sep 25, 2014 | 2003 Ford Focus

1 Answer

Undefinedas replacement on civic 98 sensor p0113


Possible causes for this code are: - Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection. this code sets when: - An excessively high voltage from the sensor is sent to ECM. Usual Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) P0113 1998 Honda Civic Description The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM).The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle.
27782.png

Sep 24, 2014 | 1998 Honda Civic

1 Answer

Mil light


Here's a link to it,best to check the canister and hoses.Gas cap could be leaking.

Dec 12, 2013 | 2003 Nissan Pathfinder

1 Answer

2000 nissan sentra 2.0 error codes p0101& p0102


P0102 - Mass Air Flow Sensor Circuit Malfunction

The mass air flownissan-maxima-maf-sensor.jpg or MAF sensor is placed in the intake air duct between the air filter and the engine intake manifold. The MAF sensor measures the amount of intake air flow. The MAF sensor converts the air flow measurement into a voltage or frequency signal, with the voltage or frequency changing proportionally to the amount of air flow. The air flow sensor signal is monitored by the engine computer (ECM). The engine computer (ECM) uses the mass air flow signal to know the engine load and to calculate the proper amount of fuel injected. If the signal from the mass air flow sensor is out of expected range, the ECM detects a fault and sets the code P0100. For example, the mass air flow sensor signal could be higher than expected when the engine is not running or lower than expected with the engine running. A car with the code P0100 may have some driveability issues, such as stalling, lack of power, surging, hesitation, etc. In some cars, the code P0100 can cause the fail-safe mode where the engine speed would be limited to 2,500 - 3,000 rpm.
If there are other trouble codes present, they might need to be looked at first. Checking the freeze frame may help, as it may contain some important information. The freeze frame is a snapshot of the engine parameters at the moment when the fault was detected. The freeze-frame may show whether the vehicle was running or stopped, whether the air-fuel ratio was lean or rich, was the engine was cold or warmed up at the time of the malfunction. Read more about the freeze frame.


Read more about mass air flow sensor.

What could cause the code P0100:
- faulty or contaminated mass air flow sensor
- open or short in the mass air flow sensor electrical circuit
- open or short in the sensor power or ground circuit

- other electrical problem with the MAF sensor wiring, (corroded wires, bent terminals, bad ground connection, burned fuse, etc.
- vacuum leaks
- restricted air flow at or before the air filter
- wrong air flow sensor installed
- problem with ECM





P0102 - Mass Air Flow Sensor Circuit Low

The mass air flow or MAF sensor measures the amount of air entering the engine. The engine computer (ECM) uses the mass air flow signal to calculate the amount of fuel injected (read more how the MAF sensor works below). The code P0102 is set when the signal from the mass air flow sensor is lower than expected. Often a car may exhibit some driveability symptoms, such as lack of power, surging, hesitation on acceleration, hard starting, pinging (detonation), or rough idle when started cold. Often the codes P0171 or P0174 could also be stored along with the code P0102, as the incorrect air flow signal can cause the engine to run lean. The codes P0171 and P0174 indicate a lean condition. Checking the freeze frame might help in the diagnostic process. The freeze frame is stored in the ECM along with the trouble code. The freeze frame contains some recorded parameters (e.g. vehicle speed, engine temperature, fuel trim) at the moment when the fault was detected. The freeze frame can also be accessed with a scan tool.



What could cause the code P0102
- faulty or contaminated mass airflow sensor
- debris blocking the air flow at the mass air flow sensor
- unmetered air leaking past the MAF sensor (vacuum leaks)
- PCV system vacuum leaks
- restricted or collapsed intake air duct
- dirty or restricted air filter
- restricted air screen before the air filter
- improper application of aftermarket components (e.g. cold intake, modified air filter, etc.)
- wrong air flow sensor installed
- electrical problem with the MAF sensor wiring, connector, power supply or ground.
- problem with ECM
- in some cases other issues with the fuel injection system like a clogged catalytic converter or a faulty manifold absolute pressure sensor (MAP) can also cause the code P0102.




Solution for MAF repair

Oct 20, 2012 | 2006 Kia Sorento

2 Answers

The warning light that looks like an engine is lit up


That is your "Check Engine Light" / "Service Engine Light". It means the Computer (ECM / PCM / ECU, it goes by many names) has detected a problem with one or more parts on the engine or transmission.
The easiest way to find out, is to stop by an auto parts store (like Advance Auto, Auto Zone, etc) and have them hook up a Scan Tool to read the Trouble Codes from the ECM. They do that for free. Most if not all garages/mechanics also have the necessary Scan Tool as well, but most of those will charge you just to read the codes.

Aug 24, 2011 | 2005 Ford Freestar

1 Answer

Got codes from auto zone po128 &po506


P0128 - Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat. Similar codes: P0125

In determining the engine did not reach a "normal" temperature, it takes into account the length of time the vehicle has been running, the intake air temperature (IAT) sensor reading, the engine coolant temperature (ECT) sensor reading, and the speed of the vehicle.

Symptoms: You will likely not notice any drivability problems other than the MIL illumination.

Causes: A code P0128 may mean that one or more of the following has happened:
Low engine coolant level
Leaking or stuck open thermostat
Faulty cooling fan (running too much)
Faulty coolant temperature (ECT) sensor
Faulty intake air temperature (IAT) sensor

Possible Solutions: Past experience indicates that the most likely solution is to replace the thermostat. However here are some suggestions on troubleshooting and repairing a P0128 OBD-II code:
Verify coolant strength & level
Verify proper cooling fan operation (check if it's running more than it should). Replace if necessary.
Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary.
Verify proper intake air temperature (IAT) sensor operation, replace if necessary.
If the above items check out good, replace the thermostat
If Nissan vehicle, check for Technical Service Bulletins (TSBs), as the ECM may need to be reprogrammed to correct the P0128 code


P0506 - Idle Air Control (IAC) System RPM Lower Than Expected

This P0506 code is one that's sometimes triggered on vehicles that have electronic throttle control. That is, they don't have a regular throttle cable from the accelerator pedal to the engine. They rely on sensors and electronics to control the throttle. In this case, the P0506 DTC (diagnostic trouble code) is triggered when the PCM (powertrain control module) detects an engine idle speed that is lower than the desired (pre-programmed) RPM.

Potential Symptoms: Most likely the only thing you'll notice is the idle speed is lower than normal so it will likely be rougher. There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

Causes: A P0506 DTC trouble code may be caused by one or more of the following:
A vacuum leak
An air restriction in the intake air path or exhuast
A faulty positive crankcase ventilation (PCV) valve
Damaged/failed/dirty throttle body
Internal engine problem
Failed PCM

Possible Solutions: This DTC is more of an informational code, so if there are any other codes set, diagnose them first. If there are no other codes, inspect for vacuum leaks, restrictions, and damage. If there are no symptoms other than the DTC itself, just clear the code and see whether it returns.


Check it, and keep us updated.

Apr 20, 2011 | 2004 Ford F150

2 Answers

2004 Chevy Tahoe check engine light came on...went to Auto Zone and this is the readout: rich or lean condition on one engine bank only. this is for fuel trim bank one, next ECM has detected a rich or lean...


Yes and no. The climate change may have reviled a problem you didn't know was there. I'd say the intake gaskets are bad and are sucking air. And now that you are in colder weater the gaskets shrink and **** air.
That or you have a weak fuel pump. But I'd have it checked for vaccume leaks (the intake gaskets), first.

Oct 11, 2009 | 2004 Chevrolet Tahoe

Not finding what you are looking for?
2005 Suzuki Forenza Logo

837 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...