Question about 2001 Dodge Dakota

Open Question

Need instructions on fixing power window - 2001 Dodge Dakota

Posted by on

  • yadayada
    yadayada May 11, 2010

    what kind, what have u done?


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i fix a drivers side motor

Aaron, if you are talking about driver side power window motor, first check that power is getting to switch, if it is replace power window motor. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Diagnose your Power Window Problem Is the Switch or motor bad
AGCO Automotive Repair Service Baton Rouge LA Detailed Auto Topics...
How To Install Repair Replace Power Window Motor Chevy Impala 00 05 1AAuto...
How to Replace Power Window Motor

Apr 23, 2016 | Cars & Trucks

1 Answer

How do i replace power window in driver door of 2001 chevy blazer?

are you replacing the power window regulator ?follow this u-tube link for excellent step by step instructions , if not the regulator let me know and i'll see if i can help further
How To Install Replace Power Window Regulator Chevy S10 Blazer GMC S15...

Sep 19, 2014 | 2001 Chevrolet Blazer

1 Answer

Need following issue resolved ASAP for an 1999 IFINITY QX4........The Passanger window stopped working with window half down. The car was driving on freeway and ran out of gas. The car was stopped, and...

For all types of power window problem and power windows not working,i suggest you to go through the help links given below. Click the link to go through its procedure to troubleshoot the problem :------

Power window problem

Power windows not working after car wash?

power locks, power window and power mirror not working?
All power windows not working?
How to remove window motor and regulator on Car?


Complete Diagnosis & Testing Power Windows?
-----------This will help.Thanks

Feb 18, 2012 | 1999 Infiniti.5 QX4

1 Answer

2004 Isuzi Rodeo - window behind driver will not go up or down - can you send me diagram/instructions how to fix it?

Hello Deen, this service is for an owners manual, but i will try to help you.
You need to determine what is wrong with the window before you can fix it. Is it the switch, motor or regulator? Is it getting power to the motor? Can you hear it click from either switch? - Most of the time, the problem is the master switch. It is not hard to replace. Use a trim panel tool or a flat-head screwdriver to pry off the power window switch assembly. Disconnect the electrical module from underneath & replace with new switch.- Here is a link that has the factory repair manual. I hope this is helpful.

Oct 13, 2011 | Isuzu Cars & Trucks

1 Answer

Lights on power window is blinking and passenger window will not lower from the drivers seat window panel. I have a Scion TC 2006.

First check to ensure the window locks are not on. If they are on simply turn them off and that should resolve your problem. However, I know there are situations in which if you had the battery disconnect it will cause this. Consequently disconnecting the battery can also fix the situation and then follow the below instructions. Or try the passenger side window switch first.

  1. Reconnect the battery terminal or fuse.

  2. Turn ON the ignition switch.

  3. Lower the window of each door halfway or more with the power window switch.

  4. Then close the window fully with the power window switch.

  5. Do not release the switch for at least 2 seconds after the window is fully closed.


May 26, 2011 | 2006 Scion tC

1 Answer

New power window regulator installed, now window goes up to top then comes back down half way and stops. How to adjust?

It is important to learn how to fix a Honda Accord window if you have an older Honda Accord. Although the Honda Accord is renowned for being a durable vehicle, the electric window motor regulators in older models can wear out over time. This is noticeable when you hear sounds coming from the window when you attempt to use it but the window won't move. But don't worry, you can use these steps to fix a broken window in your Honda Accord.

To fix a Honda Accord window, you will need:
  • A Phillips screwdriver
  • A flathead screwdriver
  • A wrench set
  • A black marker
  • Masking tape
  • A new Honda Accord electric window regulator
  1. Remove the screws securing the door panel from the inside of the vehicle. These screws are beneath the arm rest. Release the door panel by prying it away from the front of the door. Work your way back by prying off the top and sides of the panel and the back of the panel.
  2. Remove the clips holding the door panel using a flathead screwdriver to pinch them together. Remove the panel by sliding it upward and away from the door.
  3. Remove the two bolts securing the window to the regulator. Note the position where the bolts secure the windows. When you re-install the window you will need to adjust them similarly. Making a small mark on the window with a black marker is a good way to easily keep track of the correct position.
  4. Lift the window directly up and remove it from the car door. Secure it using masking tape if you prefer not to remove it completely.
  5. Remove the bolts securing the window motor and guide. Remove the window motor and guide and set them aside.
  6. Remove the regulator from the power window motor assembly. Dispose of the old regulator and install the new unit.
  7. Re-attach the window motor and guide to the door by following the removal instructions in reverse. Test the new window regulator by turning on your ignition switch and moving the window up with the electric switch.
take it back apart somethings not tight

Dec 07, 2010 | 2004 Honda Accord

1 Answer

I need instructions on how to replace power window motor for the front driver side window of a 2002 Grand Cherokee

Power Window Motor: Service and Repair
1. Disconnect and isolate the battery negative cable.
2. Remove the window regulator from the door.
3. Place the window regulator on a suitable work surface and remove the screws that secure the power window motor to the window regulator.
4. Remove the power window motor from the window regulator.
1. Position the power window motor onto the window regulator.
2. Install and tighten the screws that secure the power window motor to the window regulator. Tighten the screws to 9 Nm (80 in. lbs.).
3. Install the window regulator onto the door.
4. Reconnect the battery negative cable.

Oct 30, 2009 | 2002 Jeep Grand Cherokee

3 Answers

Saab 93 window not closing fully

1. put key to ON, hold window button down until all the way down, then do same for up, repeat one more time until you hear BEEP. You just calibrated your window. You will need to do this everytime you disconnect your battery.
2. anytime window has power and has automatically gone down, hold the X (window lock button) down while holding up on your window button, again untill you hear BEEP. not sure what this does, but it fixed the problem for me.

Feb 08, 2009 | 2004 Saab 9-3

1 Answer

Need instructions for replacing 94 Buick LeSabre window module.


Dec 29, 2008 | 2005 Buick LeSabre

2 Answers

Power window problems try this site if it will not work anymore. it has step by step instructions.

Jul 11, 2008 | 2000 Pontiac Grand Prix

Not finding what you are looking for?
2001 Dodge Dakota Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides