Question about 1989 Acura Legend

Open Question

The drivers seat just stopped working,i checked the fuse and its good, i really need to see a diagram of the seat motor as i think something has come unplugged

Posted by on

  • nakehnai May 11, 2010

    Here is your solution

    » BMW » Buick » Chevrolet

    » Chrysler » Dodge

    » Ford

    » GMC » Honda

    » Hyundai

    » Jaguar

    » Lincoln

    » Mazda

    » Mercury

    » Mitsubishi

    » Nissan

    » Oldsmobile

    » Pontiac

    » Saturn

    » Subaru

    » Suzuki

    » Toyota

    » Volkswagen

    » Volvo




Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Ford expedition power seat not working up/down nor move forward/ backwards and the seatbelt light indicator is on,please help.

get it serviced, the magic is gone.
complex seat parts.
or read the FSM on all those complex tests.
factory service manual, on topic, seats.

ask ford to fix it or buy the book, or get it serviced anywhere;.

Jan 10, 2015 | Ford Cars & Trucks

2 Answers

Electrical Problems

no it does not mean if you look at a fuse that it is good you have to use a voltage tester across the fuse . If the power is there follow the wirring diagram there are relays because the two seat do not work you got a commun connection that is not feed or broken it is always that way 1 check if you got power 2 check down the line until you find the broken connection. I hope that will help you. PS patience

May 10, 2014 | 2005 GMC Sierra

2 Answers

2008 Honda Pilot Driver's Seat motor is really loud when moving the seat forward and back. Sounds grinding and like it's working really hard. I'm afraid it's going to stop working. Any suggestions on how...

Check to see if something is caught up in the slide areas of the seat track.
There would be no need to grease anything.
Let me know if there is or isnt something in the way down there.

Mar 18, 2014 | Honda Pilot Cars & Trucks

3 Answers

I have a 2002 Oldsmobile Bravada...Yesterday all of a sudden my passenger's side window stop working(up and down)...the power lock and the heated seat all stop working on my passenger's side...?

If you have an Owners manual, try looking for a fuse panel diagram. Your could have a bad connection inside the doorpanel which shorted the fuse. The seat drive motor must be wired to a separate circuit coming from the floorboard and its okay.
The circuits are wired independently to protect the lighter wires from the heavy drain of the seat motor. If you had the heated seat function working on the seat at the same time as adjusting the seat motor it would be too much for a single circuit, so they gave you two circuits.

If you are going to work on the door panel, disconnct the NEG battery cable so you won't short out something taking it apart.

Another Repair place you might try is a Glass Replacement shop. They install the inner workings of window tracks daily and remove the door panels to do it. They would be able to find your wires, test your window motor, and get you on your way quickly.

Unlike a Dealership, they have a high turnover of glass installations daily. Some even come to your house to repair your problem. Your car would be repaired more quickly with these services.

Nov 22, 2011 | 2002 Oldsmobile Bravada

1 Answer

1995 Subaru Legacy TS-R,electric drivers seat stopped working in half down position,all fuses are intact ? I have unbolted & lifted the seat, their are 3 connectors under it,the wires from the blue...

the wires can get cut by the seat movement, these could be the wiring for heated seat that was an extra on some models. the motors can become stuck or even strip a cog. if its stopped working but fuse is fine i would think the bushes in the motor have gone you maybe able to change thes i think this part is still available if not it could be a new motor need, but befor this check the switch for the seat these are a common fault over time, you will need a meter to test the switch check its working and has power. you may need some help to do the next part. to check there is power to the motor while its out use a meter and check the volts at the motor plug and have some one press the switch in both directions. if there is power then the motor is at fault.

Jun 29, 2017 | 1997 Subaru Legacy

1 Answer

I need a wiring diagram of the power seat for a 97 chevy venture van


Oct 17, 2010 | Chevrolet Venture Cars & Trucks

1 Answer

My power seat is not working on my 94 Mercury Marquis,and I don't have a fuse box diagram. The fuse box under the driver's side has all good fuses in it,where do I look for another fuse box? Or what do i...

check seat wiring connectors under seat, connection to motors that operate seat and seat switches, I think it's a bad switch due to wear and dust/dirt

Oct 04, 2010 | 1994 Mercury Grand Marquis

2 Answers

Drivers electric seat won't move, passenger seat will, neither seat heater works which fuse do i replace?

Without a repair manual for your make/model it is impossible to tell which fuse. The quickest way is for you to pull the fuse cover and look for a diagram. If that doesn't work, pull out a volt/ohm meter and a flashlight and start pulling one fuse at a time and inspecting. You should be able to tell clearly if it is blown or not but if it's questionable, shine behind it with the flashlight. If still no luck, set the ohm meter to ohms, turn it on, and touch a lead to each blade of fuse. Meter will show zero if fuse is blown but will show continuity/activity if it is good. If all fuses good, next check for power as close to seat motor as possible. Come to think of it, check to see if perhaps the motor has become unplugged! To check for power set your ohm meter to volts, attach black lead to a good frame ground. That would be something metal that is directly attached or is part of the metal body of the car.Next take the red lead and start touching the connectors leading to the motor. If you have done all this and still have not found the problem, next would be the motor and/or the switch that turns on the motor but that will take more instruction..Let me know?

Jan 02, 2010 | 2004 Chevrolet Silverado 2500HD

2 Answers

1999 Cadillac Deville Driver side power seat not working

No fuse.These seats are protected with relays and a seat module.The module is under the drivers seat.There are 3 connectors and it would be hard to check all these wires for power to the motors.First look under the seat and make sure none of the connectors came apart under the seat by something that might have been left or rolled under it.The 2 main ones you can check are the connector 2 terminal C and connector 3 terminal A.C is a black wire which is ground and A is a red wire which is the feed power wire.Connector 2 is green and 3 is black.If the ground and power wires are good then you could have a bad drivers seat module.What I would do is go to the salvage yard and find a used module to try.Good luck.

Dec 07, 2009 | 1999 Cadillac DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts


Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides