Question about Pontiac Bonneville

1 Answer

I got a 98 bonneville ,the motor is making a squeeling sound and its not coming from any pullys or belt it all new....if i take off the oil cap the car sounds great......can some one please held with this problem

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

Ck your pcv valve mabey pluged located in top of your intake manifold

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What could cause my ford taurus 03 to cause such a loud squeeling noise?


it maybe the synchroniser which is under the throttle body (and houses the cam sensor)and makes the same noise. use a rubber hose to pimpoint the location of the noise

Sep 17, 2014 | 2003 Ford Taurus

1 Answer

2002 highlander--started squeeling from the belt area in Feb. Had belt replaced, was worn. It would squeel on starting then stop. Now turning on a/c makes it squeel. Fan works and after a little while


try cleaning the cogs that the belt runs around some times the belt puts a layer of rubber on them when the belt slips which makes the new belt slip if not could be a bearing in the pullys the belt runs around

Aug 14, 2012 | 2002 Toyota Highlander

1 Answer

Hello, not sure what happen but, on my way to work today my battery light came on and then went off right when I got to work. When I left work later that evening, not only was my battery light still on,...


you may want to check your crankshaft pully to make sure it does not slip. we were having the same problem with our 2004 kia and the crankshaft pully had lost its pins. so it was just spinning on the crankshaft bolt. its the center pully, the one comeing driectly out of the motor. we found this by opening the hood and turning on the a/c. the drag from the belts turning the a/c on. made the belts squeel slightly and you will see the pully slip under the load of turning on the a/c this takes 2 people. you want to start the car with the hood up a/c off and while the second person watches the center belts and pully have the driver turn on the a/c if the belts squeel or the center pully slipps thats your problem.. also if you have any problem with power steering, lights going out or dimming, battery going low or any function light coming on inside. thats an indicator of this also.. i hope this helps you...

May 22, 2011 | 2004 Kia Optima

1 Answer

I have a 2001 Sonata. I have a squeeling pulley.


It sounds like you have a worn or streched belt making the sqeeling noise. Whenever you turn on a
device in the car that draws a fair amount of voltage
ie. a/c or headlights it will cause increased drag on
the alternator and if you have a loose/worn or glazed
belt, it can slip around the pully making the squeel.
To adjust the alt-a/c belt loosen the mounting bolts
on the tensioner, then use the adjuster bolt behind
the tensioner pully to loosen and tighten the belt.
Be sure to check the belt for cracks bald spots etc.
While the belt is loose spin the pullys to make sure
they all spin freely. Also I would replace the belt just
to be sure. Hope this helps

Jul 04, 2010 | 2001 Hyundai Sonata

2 Answers

Really bad screeching sound coming from drive belts


Alternator bearings a possible. Idler Pulleys or Belt Tensioner Pulley

Mar 24, 2010 | 1992 Subaru Legacy

1 Answer

2003 chryler concord ltd 3.5l engine ac belt replaced


Sounds like the tensioner bearing is frozen, not turning at all. You need to remove the belt and see if it spins.

Aug 14, 2009 | 2002 Dodge Intrepid

2 Answers

2005 nissan ultima.hear a squeeling noise.its worse when ac is of


sounds like to tightened the belt to much... back off the tension on it a little bit, with the belt, you want it tight, but not to tight,,,, it should have about 1/4 flex in the belt when tightened... make a little loose and see if you still have the squeel... if you still do try going to a parts store, like pepboys, autozone etc. pick up some brake cleaner it will be in a canaster, and while the engine is running spray a little <spirts> on the pullys, and see if the squeel stops, if so then it could be a bad bearing in the part... see what makes it stop... the brake cleaner will dry quick and not ruin anything cause you do it in short bursts do not use wd40 or any oil type of stuff on it cause it will cause slippage...

Jun 03, 2009 | 2005 Nissan Altima

1 Answer

98 mercury villager power dteering noise and hard to turn


The squeeling noise you hear could be the bearings in your power steering pump, when bearings go bad they tend to make a squeeling noise.

Mar 13, 2009 | 1998 Mercury Villager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...