Question about 2006 Mazda 3

Open Question

The seat has a mechanism which raises the seat up and down ( drivers side ) but now when you raise it up it doesn't sit properly and lifts up and down and i can't get a warrent untill i fix it

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My fiat strada adventure driver side window not working properly when window goes up it starts going to the side and only goes up half way before it starts struggling


the window glass has come off of the window actuator mechanism so it isn't being pushed up straight and is coming out of the guide rails have to strip dooe panel and see why the glass isnt sitting straight on the raising mechanism

May 18, 2014 | 2007 Fiat Strada 1.2

1 Answer

Seat height adjustment


Hi
There should be a set of levers on the right hand side (left hand if you are on the left). one of these will move the seat back and forth, one will raise and lower and one will move the seat back.
Some of these rise and fall levers are a "pump action style" where you push down to get the level or pull up.
Other type will raise the seat fully either up or down. Its on a cam.
I have had these seize before and have had to replace the mechanism.
Cheers
Roger

Apr 21, 2014 | 2006 BMW 318 Ci

1 Answer

The driver side window regulator?


I don't know for sure, but it sounds like at least one side of the window has come loose from the mechanism that raises and lowers it. Some cars have two plastic rivets or pins to connect the window to the mechanism. If one comes loose or breaks the window will behave as you described when you try to raise and lower it. If you want to fix it yourself you'll need to remove the armrest and inside door cover in order to see and access the window and raise/lower mechanism. Look for broken or loose pieces in the bottom of the door cavity. Hopefully you can see what's wrong and get replacement parts from the dealer.

Oct 01, 2017 | 1991 Toyota MR2

1 Answer

I have a 1991 Lexus LS400. when i reclined drivers sode seat I must have put it back to far. I heard it make a popping sound. Now the seat will not raise up all the way. It will only start raising on the...


The seat will have to be removed in order to inspect the power seat mechanism. Based on what you have stated, my guess would be that a gear may have stripped inside the mechanism when you heard the popping sound.

Jan 10, 2011 | 1991 Lexus LS 400

1 Answer

Rear seat belt is stuck in recline position. I recline the rear seat to make room and I can not raise the seat back up. The seat belt is not allowing the seat to raise


The problem:
The set belt stop has been lost so the seat belt retracts too far when the seat is laid flat. When laid flat the release mechanism lock as it should when not level. So the seat cannot be raised up as the belt is too tight and locked.
The Solution:
1) Push the two little clips to release and remove the headrests.
Pull the grey lever on the right of the seat base, lift seat base up and forward toward the front seat..
2) See two red capped leversat the back of the two seat hinges and lever them to the upward position, this releases the seat.
Rock the very heavy seat unit upwards and lift complete unit upwards.
3) Take it out of the car and turn 180% so that the back of the seat and base are in the upward position and the seat belt will pull out as it should
4) Replace the missing belt locking stop (I used a tie pin permanently fixed using super glue).
5) Fold seat back down and test then either re-fit seat unit or leave out to decrease fuel consumption.. 2_5_2014_8_03_56_pm.jpg 5f6d2b58-2927-4184-9c82-d111e3a9591a.jpg e9f641fc-5fbc-4c21-a371-ff371d942b1a.jpg a357ac71-d6ed-4dc7-999c-04367d3d6e72.jpg

Oct 26, 2010 | 2002 Chrysler PT Cruiser

1 Answer

How do you remove the rear seat out of a 2001 Ford Excursion


If you are talking about the third row seat, the first step is to fold the seat down. Pull the lever behind the passenger side of the third row seat and fold the seat down. Then, from the cargo area, raise the bar located directly behind the third row seat and lift the seat forward. The seat should now be detached from the car and can be removed. When you reinstall the seat, be sure to secure the seat properly so passengers do not get injured in a sudden vehicle maneuver. This should help you to fix your problem. Contact me at FixYa if you have any further questions.

Aug 10, 2010 | 2001 Ford Excursion

1 Answer

Driver side 2nd row seat is stuck in my 2002 kia sedona


I have had a similar problem. I solved it by keping the seat back raised, get someone to rock the seat back violently while you pull on the balck strap and try and remove the seat. This may not happen 1st time if not spray WD40, and lots of it all over the seat linkages and locking mechanism under the seat.

When you get the seat out turn it upside down and spray with WD40, do this with all the other emovable seats.

Sep 25, 2009 | 2006 Kia Sedona

1 Answer

Drivers seat sits to high. Can't find the adjustment for up and down?? Thanks


lever on the left hand side of drivers seat. pull up to raise seat. push down to crank it down.

Jun 07, 2009 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

Remove seat from second row in Honda Mini Van 2007


on the passenger side feel under the seat and there is a lever that pulls toward you as you stand at the sliding door.

First, raise the armrest, then lower the back all the way forward. Then remove the headrest sit it out of the way and while pulling the lever under the seat towards you, lift up the seat from the back so it tilts forward. When it is standing on its "nose" lift first one side shifting it either forward or backwards to clear the rod on which it is hooked. Do the same with the other side of the seat and then lift it out. Installation is the reverse of removal.

The other seat is much the same, though sometimes the lever is a little different but in the same place.

Good luck,
bob

Jun 07, 2009 | 2006 Honda Odyssey

Not finding what you are looking for?
2006 Mazda 3 Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...