Question about 2000 Oldsmobile Intrigue

1 Answer

Power window won't go up or down. Loose cable in door

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

This indicates failed window regulators and these are the drive cables which are actuated by the motor

Posted on Sep 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix a window that wont go up in a 1998 ford mustang?


I'm assuming it's not power window's,you will have to remove to window crank and the door opening latch,on the window crank,there's a clip embedded into crank,you can push door panel in at crank and use a flat head screw driver to push clip off,door handle has to come off,arm rest if you have one,,there are clips holding the panel to door,you can also use a flat head to put in between panel and door and pop loose,you may have to replace clips.After you get panel off ,you will see why the glass won't come up,may be off track.

Aug 10, 2012 | Ford Mustang Cars & Trucks

1 Answer

Locks won't work and Windows won't go down brought


Check for a broken wire in the door jam. Other wise I think, You need to research this more, that the Left Front Power Window Switch is actually a door module. I would guess it has either lost power or gone bad.

May 26, 2012 | 1999 Jeep Grand Cherokee

2 Answers

Just had battery replaced and now right side windows won't roll down.


Remove the battery negative cable for 5 minutes to reset the body control module and see if that corrects the problem. This can be a coincidence you know.

Mar 23, 2012 | 2005 Chrysler PT Cruiser

1 Answer

No power to the power windows or locks windows roled down but now won't go back up Fuses or OK what can I do to trace the problem


problem could be in the rubber boot from the door to teh door frame where the cables run ,i would remove the switch complex and check for a power feed to this switch ,it could be the cables in this tube /trunking are damaged or the earth cable even is broke,this is a fairly common fault

Nov 02, 2011 | 1992 Dodge Ram 350

1 Answer

Window cable broke so window does not go up and down


The window regulator cable on a Ford Expedition is part of the regulator assembly and is not serviceable separately. Therefore, if your Expedition's window regulator cable incurs damage, you'll need to replace the entire regulator. The cable moves the regulator up or down in response to the window motor. If the cable malfunctions, you won't have command of your Expedition's power window until you replace the regulator. If you have basic auto-repair skills and an hour of free time, you can replace your Expedition's window regulator. Pry the window switch bezel out of the Expedition's door panel using your trim tool. Disconnect the switch from the door harness by hand and set the switch/bezel assembly aside.

  • 2 Remove the hex head screws from the door panel using the Phillips screwdriver. Depending on the year of your Expedition, you may need to remove a trim cover from behind the inner door handle with the trim tool to expose that screw.
  • 3 Lift the door panel up and off the door by hand. If your Expedition has a courtesy light in the lower-trailing edge of the panel, disconnect that light from the door wiring harness before moving the panel away from the door.
  • 4 Push the Expedition's window to the top of the window frame by hand. Tape the glass to the top of the door with packing tape to prevent it from dropping back down.
  • 5 Remove the window regulator mounting bolts with the socket set. Unbolt the regulator from the window glass with the socket set. Pull the old regulator out of the Expedition's door by hand.
  • 6 Set the new window regulator into the Expedition's door by hand. Bolt it in place with the socket set.
  • 7 Reinstall the Expedition's door panel in reverse of how you removed it.
  • Oct 17, 2011 | 1997 Dodge Caravan

    1 Answer

    The passenger door power window won' t go up or down . Makes a brief noise but wont move any more. 2 door coupe


    The cable in the window mechanism (regulator) has broken and wrapped up around the gear on the motor. You will need to replace the regulator/motor assembly.

    Aug 19, 2011 | 1999 Pontiac Grand Prix

    2 Answers

    How do I fix my rear window it won't roll up ?


    open the door, make sure the window is in its carrier, power cables conected to the motor and motor is working. This should savd u, good luck.

    Jun 26, 2011 | 2006 Hyundai Sonata

    2 Answers

    My passenger side window doesn't roll up and it slides down into the door


    Before the failure, did it make any knocking or griding noises? When you operate the button does the motor make it's normal noise? Did the window become loose and fall down inside the door abruptly? Some vehicles have issues with the "window regulator". This is the cabling device that hoists and lowers the window on the inside rail. Some automakers use plastic bits to keep the window on the rail. If those become loose or break, the window will fall off the tracks. Continued operation of the window will cause the regulator (cables, gear or motor) to fail. If you want to attempt a DIY fix, remove the door cover (a mechanic will usually call this a door card) and see if the window is off the rails. Good luck.

    Jul 06, 2009 | 1999 Jeep Grand Cherokee

    2 Answers

    Drivers door panel removal


    The book says 1. remove power accesory switch panel by using suitable flat blade tool at front. 2. Disconnet electrical connections.
    3. pry door handle plug by using small flat bladed tool
    4.remove door trim handle mounting screws
    5. remove door trim panel from retainers.Start at rear bottom corner and pry outward.
    6. remove door panel.
    KD does make a tool that will properly pry the door panel away from reainers. KD 3705 You might get by with a screwdriver.
    One other thing you may need to have the window down to get the panel to come off. You will have to lift up on it once it is loose from the fastners.
    Hope this helps you out.

    Mar 23, 2009 | 2003 Chevrolet Malibu

    Not finding what you are looking for?
    2000 Oldsmobile Intrigue Logo

    Related Topics:

    336 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Oldsmobile Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8572 Answers

    Are you an Oldsmobile Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...