Question about 2002 Honda Accord

1 Answer

I just purchased a used 2002 Honda Accord 4cylinder. My question is, What is the proper procedure for flush the Radiator?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 305 Answers

Remove the large hose at the bottom of the radiator,(when the engine is cold ), run engine for 30 seconds, replace hose, fill with water and a bottle of engine flush, run engine for 5 mins, then when cooled down, repeat the previous process, but just add clean water and the relevant amount of ant-freeze

Posted on Sep 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 02 honda accord slipping an d4 light started to come on i shut the car off and it turned off but my car has no power can any one help?


There is a good chance that the fairly new trans rebuild,
is now burnt from the slipping

Going to have to have it towed to a shop of your choice

Mar 05, 2013 | 2002 Honda Accord

2 Answers

Heat is luke warm and coolant temp gauge not getting to operating tempature. installed a new thermostat with the valve up on the thermostat. removed the heater control valve to make sure it was functioning...


this is probibly a blockage in the radiator or water pump issue start by flushing the radiator,then check that water is flowing thru the radiator and water system.

Dec 21, 2010 | 2000 Honda Accord

1 Answer

Took radiator out and disovered were i took the back of the top hose off there is gunk all in the piece like oatmeal looking stuff or probably oil h2o mix. What do i need to do or is the engine shot?1996...


suggest you buy radiator flush,follow intructions on can,motor not trashed!! flush system until clear,re-install antifreeze,watch for leaks around radiator

Aug 12, 2010 | 1996 Honda Accord

1 Answer

1991 honda accord over heating when i drive at top speed


Top speed is hard on a car, at that age of vehicle worn water pump and old old with buildup a bad thermostat and radiator with scale buildup on inside and debris on the outside creates more heat than released. try replacing the thermostat and water pump and doing an flush of the cooling system with an oil change and see if that helps. Also a new radiator cap will hold proper pressure on the system so dont forget that.

Apr 29, 2010 | 1991 Honda Accord

1 Answer

WHERE DO I PUT THE TRANSMISSION OIL INTO ON THE ACCORD 1996adn what grad of oil please for the engine.what is it when yo get light brown oilly substance in the water container at the side of the rad.


put honda brand transmission fluid in the transmission fluid dipstick hole, if this is a 4cylinder, use 2.5 quarts to fill, if 6, use 3 quarts. if you are getting brown oilly substance in the radiator fluid reservoir, this usually means you have a blown head gasket, are you having overheating problems. try draining and filling your radiator with new fluid.

Oct 27, 2009 | 1996 Honda Accord

1 Answer

I have a 92 model honda accord the car is boiling water but the temperature indicator remain normal


Be sure your radiator/cooling system is full. In many cases there is a bleeder valve to release air. If there is none, 'bleed' air at top radiator hose. Remember, this system is under pressure, you can burn yourself badly if U dont follow proper procedure. Look it up in your repair manual.

Aug 11, 2009 | 1992 Honda Accord

2 Answers

Cooling fan in Honda


On my 1996 Accord (4cylinder), this was caused by a tube inside my radiator overflow tank dropping off into the tank - the radiator would have too little fluid in it, so the fans would run a LONG time after shutting the thing down. The tank is in the front left, a white cap with a black tube running out of the cap to the radiator. Underneath the cap there should be a foot or so of hose - this is what fell off of mine.

Hooked it back up, made sure enough fluid was in the radiator, and no more problem.

The dashboard coolant heat gage will show the high temperature, also.

Jul 02, 2009 | 1996 Honda Accord

1 Answer

My honda 85 accord


maybe flush the engine and entry and exit pipes

Aug 28, 2008 | 1985 Honda Accord

Not finding what you are looking for?
2002 Honda Accord Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...