Question about 2006 Chevrolet Tahoe

1 Answer

How do you replace the passenger DRL on a 2006 Chevrolet Tahoe?

How do you replace the passenger side Daytime Running Lamp (DRL) on a 2006 Chevrolet Tahoe?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 142 Answers

If you remove the headlight, it has two pins that slide down one on each side unhook the wiring for the bulbs. next you will see the top of the parking light on the side closest to the middle the parking lens has a built in clip if u press it in with your finger and pull out the whole lens will be accessible and you will be able to change the burnt bulb

Posted on Sep 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 chevy e3500 drl location


DRL location ? Module ? Lights ?
The operation of the daytime running lamps is controlled by the daytime running lamps control module. The module is powered by CKT 39 (PNK) from the GAUGES fuse, and it is grounded through CKT 150 (BLK). The module turns on the daytime running lamps under the following conditions:
Daytime Running Lamp (DRL) Control Module
Under the left side of the IP, taped on the IP harness

Jul 03, 2017 | Chevrolet Cars & Trucks

2 Answers

Can anyone tell me where the drl module is located on a 2000 Chevy Blazer


Behind the lower kick panel on the passenger's side good luck colin

Jun 24, 2017 | Cars & Trucks

1 Answer

2003 Chev Malibu. Radio inop with key in on position, auto systems not working, I.e. daytime running lamps, auto lock and drivers unlock, fuel and temp gauges not working.


Have you had vehicle check for DTC'S diagnostic trouble codes . Check fuse's an relays , find wiring diagrams to see what controls these systems ?
Radio/Battery fuse , fuse G 10 amp located in the right instrument panel fuse box . Do you know where this ?
Fuse Block - Right IP - On the right side of the instrument panel
An there is one on the other end of the instrument panel ,driver side .
Fuse Block - Left IP- On the left side of the instrument panel The fuel an temp . gauges not working is probably the step motors inside instrument cluster . GM had problem with this 03 to 06 .
How to repair GM Instrument Cluster Speedometer Gauge Stepper

Daytime Running Lamps (DRL)
The ambient light sensor is a light sensitive transistor that varies its voltage signal to the body control module (BCM) in response to changes to the outside (ambient) light level. When the BCM receives this signal it will either turn on the daytime running lights (DRL) or the headlights. Any function or condition that turns on the headlights will cancel the daytime running lamps operation. With the headlight switch in the OFF position, the headlights will either be turned ON or OFF, after an approximate 30 second delay depending on whether daylight or low light conditions are sensed. The HTR A/C IGN fuse in the underhood junction block supplies ignition positive voltage to the daytime running lamp (DRL) relay coil circuit. The DRL relay switch contacts are connected to the low beam circuit. When the headlamp switch is placed in the OFF position, the BCM will either turn on or off the daytime running lamps, depending on whether daylight or low light conditions are sensed. The BCM energizes the DRL relay, closing the switch contacts and grounding the low beam circuit. Ground is provided at G101. The DRL illuminate the low beam headlights at a reduced intensity. The DRL will operate when the ignition switch is in the ON position, the gear selector is not in the PARK position and the parking brake is released. When these conditions have been met and the ambient light sensor indicates daytime conditions, the DRL will illuminate.
DRL operation in Manual Transmission equipped vehicles will occur when the ignition switch is in the ON position, and the parking brake is released. - check fuse's an relay first.
Door Lock System Components
The power door lock system consists of the following components:
?€¢
Driver door lock switch


?€¢
Front Passenger door lock switch


?€¢
Body Control Module (BCM)


?€¢
Relays: Driver Door Unlock--if equipped, Door Unlock, and Door Lock


?€¢
Door Lock fuse 15A


May 25, 2016 | Cars & Trucks

4 Answers

I have a 2006 civic SI. DRL indicator is on, driver side low and high beam ok. Passenger side low beam ok but DRL and hi beam not working. Any help is appreciated.


When either the high or low beam light is out in either side, DRL (daytime running lights) indicator will come on. When one bulb goes out, that's a clue the opposite bulb will burn out soon, so its best to replace both bulbs. If it was a fuse issue, both left and right side would be out. If driver side is OK but passenger side is not, then its a bulb issue. A 2006 Honda civic takes 9006 (HB4) low beam bulbs and 9005 (HB3) high beam bulbs. Cheapest is online from Walmart site-2-store. After procuring, wear latex, vinyl, or ANY gloves to keep your (corrosive) oil skin from coming in contact with headlight glass bulbs. Your skin oil will chemically react and cause shorter life span on glass bulbs. Instruction don't tell you this, so you handle with your hands, then need to replace bulbs 3 years later instead of 5 years (or more) in the future. With gloves on, pop the hood and look behind each headlight. Turn counter clockwise to unlock headlight bulb holders. Its a quarter to half turn to unlock bulb holder lock. Replace one bulb at a time so you don't confuse high beam from low beam. The wire has a tab you need to lift to pull out & disconnect wire connector. You might need a slim narrow-**** (NOT phillips) screwdriver to lift the tab; or use your house key. Snap the wire connector to the new bulb, then twist into headlight housing to secure bulb holders, then move on to the next bulb to repeat the procedure. Pict below, 9005 high beam is on the left, 9006 low beam is on the right. Handle by grasping the plastic base, not the glass bulbs. The raised potrusion on the bottom center is where the tab locks onto wire connector. Replace all 4 bulbs now, but in the future, its likely the low beam will wear out before the high beam. In the future, replace only the pair, not all 4. The factory installs inferior bulbs that go out sooner, hoping you'll take to dealership and they ******** you with higher parts-n-labor fees. As opposed to Walmart online site-2-store, it would cost you AT LEAST triple in parts & labor from dealership to replace all 4 headlight bulbs :-(
45d1f6ac-2983-42b9-a46c-30ef441b89e7.jpg

Nov 29, 2013 | 2006 Honda Civic

1 Answer

I tried to disable DRL but when i did my low beams dont work, any ideas?


You are wasting your time. This system is automatically controlled by the Daytome Running Lamp module. The system requires the daytime running lamp relay to work in order for the low beam headlamps to work. Any attemps to "disable" the daytime running lamps will also disable the low beam headlamps. I think what you are having problems understanding is that your headlamp switch does not actually turn the lights on. The switch only provides power so the DRL module can operate....it doesn't send power directly to the lamps. The power to the lamps is provided by the relay, which is operated by the DRL module. Unless you want to completely "re-engineer" the ENTIRE headlamp system, you are not going to get it to work the way you are wanting it to.

May 20, 2012 | 1999 Chevrolet Tahoe

2 Answers

Daytime running light module location 2001 impala


The daytime running lamps in your 2001 Chevrolet Impala are controlled by the Body Control Module (BCM) Here is a description of how the system works:

The ambient light sensor is a light-sensitive transistor that varies its voltage signal to the Body Control Module (BCM) in response to changes in the outside (ambient) light level. When the BCM receives this signal, the BCM turns ON either the DRL or the headlamp relay for auto headlamp operation. Any function or condition that turns ON the headlamps will cancel the DRL operation.
Thirty seconds after you start the ignition with the headlamp switch set in the OFF position, the DRL will perform one of two actions:

Illuminate the high beam headlights at a reduced intensity in daylight conditions
Illuminate the low beam headlights in low light conditions
The DRL/EXT lamps fuse in the top of the engine fuse block supplies battery positive voltage to both the DRL switch contacts and to the DRL relay coil. When the BCM energizes the DRL relay coil, current flows through the right high beam lamp, to the left hand high beam lamp, to the energized DRL relay switch contacts, to ground G101.
The high beam headlamps are now in series, and split the voltage so that the headlamps illuminate at halt intensity. The DRL operates when the ignition switch is in the RUN position, and the parking brake is not set or the transmission is not in park. When these conditions have been met and the ambient light sensor indicates daytime conditions, the DRL will illuminate.

Oct 10, 2011 | 2001 Chevrolet Impala

2 Answers

Where is the Daytime driving Lamp relay located


follow the wires to the drl relay. It must be inline from the regular light switch to the headlamps. I have a 1990 Cadillac Deville that has an aftermarket module that controls the daytime running lamps, and it is mounted on the driver's side wheel well.

Some relays are found in the fuse box under the hood.

If your daytime running lamps burnt out, take it to an electrical shop and ask them to check it out.

If you buy an aftermarket daytime running lamp kit, they can install it for you.

But, I agree, you should check for voltage and function at the relay for the daytime running lamps on your Astro.

But, if all else fails, the electrical shop should be able to diagnose and repair this problem.

Jul 21, 2010 | 1999 Chevrolet Astro

1 Answer

Headlamps not working, fuses o.k., bulbs ok, replaced switch ok 98 chevy cavalier w/ daytime running lights . 2 relays on harness between headlamps one is for fog lamps, not sure of the other , cannot get...


are your daytime running lamps working. if they are according to the schematic there are 4 relays, fog lamp, fog lamp cut off, isolation, and daytime running lamp; 2 fuses: right and left, that supply volts to the headlamps. it's a little confusing though, because these schematics might have some mistakes. anyway, it looks like the drl relay.grounds the headlamps when the drl control in the micro processor located in the instrument cluster senses the headlamps have been turned on. this trips the relay and 12vdc is supplied. the dlr might be bad. otherwise, i would think you have a hardwire or connector problem.

Mar 08, 2010 | 1998 Chevrolet Cavalier

1 Answer

The day/night light is out on the divers side, i have replace the bulb..what next


If you are talking about the Daytime Running Lamp, most often if a new bulb does not correct the condition it will need a new DRL lamp socket replaced. The socket is the thing that holds the bulb in place and allows 12 volts to the bulb. The intense heat of the bulb causes an internal open circuit in the socket itself.

Feb 25, 2010 | 2002 Chevrolet Tahoe

1 Answer

Headlights. sensor


You could replace the sensor or try disconnecting the DRL control module .What relay was replaced ? I see no relay on wiring diagrams or in service info. Replacing the Daytime Running Lamp (DRL) Ambient Light Sensor isn't hard . Just take the top dash pad off ,easy .
Removal Procedure
Remove the instrument panel (IP) upper trim. Refer to Instrument Panel Upper Trim Pad Replacement in Instrument Panel, Gages and Console.
Remove the security system LED. Refer to LED Indicator Replacement - Vehicle Security System in Theft Deterrent.
Twist the DRL sensor counterclockwise in order to remove the sensor from the IP upper trim.
Remove the DRL sensor from the wiring harness.

Removal Procedure
Remove the windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement in Interior Trim.
Important: Remove the upper trim panel slowly, the retainer clips could possibly fall into the instrument panel.
Lift the instrument panel (IP) upper trim panel approximately 51 mm (2 in) and pull rearward to release the retainers.
Remove the DRL ambient light sensor. Refer to Daytime Running Lamp (DRL) Ambient Light Sensor Replacement in Lighting Systems.
If equipped, remove the sun load sensor.

Pull the windshield garnish molding from the A-pillar in order to disengage the retaining tabs and clips.
Remove the windshield garnish molding from the A-pillar.

Daytime Running Lamps (DRL) Control Module
Left side of the IP

Removal Procedure
Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
Remove the instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages and Console.
Slide the daytime running lamp module from the bracket.
Disconnect the electrical connectors.

Oct 24, 2017 | 2002 Chevrolet Venture Passanger

Not finding what you are looking for?
2006 Chevrolet Tahoe Logo

624 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...