Question about 1996 Dodge Intrepid

Open Question

Location of water pump on 96 intrepid - 1996 Dodge Intrepid

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

BPALepine
  • 61 Answers

SOURCE: 3 05 bolt patter on 96 intrepid for water pump

Really depends on the engine you have.

If you have a 3.3 L engine then the water pump is a 5 bolt pattern

If you have a 3.5 L engine then the water pump is a 3 bolt pattern.

Posted on Apr 24, 2009

  • 126 Answers

SOURCE: how do i change the water pump on a 96 dodge

If its a 2.7L, you have to remove the intake and valve covers. You 'll have to remove the radiator core support and radiator. You'll have to remove the drive belts and balancer. Then you remove the timing cover and make sure the timing chains are lined up. The water pump is located in the middle of the front of the engine behind the timing cover. This job really isn't a good thing to attempt if your a basic home mechanic. This is a very complicated job. If the timing chains aren't lined up perfectly, you can bend every valve in the engine on start up. Then it gets expensive.

Posted on Mar 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace water pump 99 2.7


Hope this helps you....

Instructions
  1. Prepare the Dodge Intrepid
    • 1 Lay out a drop cloth underneath the Dodge Intrepid to protect the floor from coolant spills. Designate an area to lay out each part alongside its bolts and connecting hoses and wires. Use a drop cloth here as well, some of the parts will have traces of grease and coolant.
    • 2 Disconnect the negative battery cable, using a screwdriver to unscrew the clamp that secures the cable to the negative (-) post. Pull the cable away from the battery post.
    • 3 Use a jack to elevate the Dodge Intrepid and jack stands to shore up the jack. Release the pressure in the radiator by removing the cap. Take out the drain plug located underneath the radiator. Catch the coolant in a resealable container
    • 4 Use a grease pencil to mark on the timing belt its position in each pulley before removal. This will save time when reinstalling. If needed, replace the timing belt and skip marking the old one.
    Remove the Damaged Pump
    • 5 Locate the water pump on the Dodge Intrepid. It's mounted on the front of the engine block and connected to the radiator and various other parts through a series of hoses. It's rotated by the timing belt. Study these parts, as you'll have to remove them.
    • 6 Disconnect or remove the parts in front of the water pump, using an adjustable wrench. In the most common Dodge Intrepid engine--the 2.7L--you'll find, in order: the upper radiator crossmember, fan module, accessory drive belts, crankshaft damper, timing cover, timing chain and guide wires.
    • 7 Unbolt the water pump from the engine block, using an adjustable wrench. You may have to use a chisel to gently break the seal between the mount and the pump. Discard both the pump and the bolts.
    • 8 Clean off the mounting area with a shop rag.
    Install the New Pump
    • 9 Inspect the new water pump to ensure it's identical to the old pump and free of any metal splinters or debris.
    • 10 Arrange the new water pump on the mount. You won't need sealant for the o-ring on a Dodge Intrepid. Hold the water pump and o-ring in place as you secure it with the new bolts. Tighten them with a torque wrench to 105 inch pounds torque in any order.
    • 11 Install the timing belt and wires, using the grease pencil marks to guide you in installation. Install the rest of the parts in the order removed. The camshaft must be reconnected with a torque wrench at 125 foot pounds torque.
    • 12 Replace the radiator's drain plug and refill the radiator with the amount and type of coolant specified in your owner's manual. Release the jack and jack stands.
    • 13 Attach the negative battery cable to the post and tighten the screw on the clamp. Crank the Dodge Intrepid's engine and check for leaks. Then, close the hood.

Read more: How to Install a Water Pump in a Dodge Intrepid ' eHow.com http://www.ehow.com/how_4508707_install-water-pump-dodge-intrepid.html#ixzz29Q1ZC1uZ

Oct 15, 2012 | 1999 Dodge Intrepid

1 Answer

How do i change the water pump on a 96 dodge intrepid


If its a 2.7L, you have to remove the intake and valve covers. You 'll have to remove the radiator core support and radiator. You'll have to remove the drive belts and balancer. Then you remove the timing cover and make sure the timing chains are lined up. The water pump is located in the middle of the front of the engine behind the timing cover. This job really isn't a good thing to attempt if your a basic home mechanic. This is a very complicated job. If the timing chains aren't lined up perfectly, you can bend every valve in the engine on start up. Then it gets expensive.

Mar 29, 2010 | 1996 Dodge Intrepid

1 Answer

Is water pump easy to access? have to change someones water pump and have never look under hood of Intrepid. Have to fix in driveway and have like 2' of snow here. Just wondering if there is any under car...


No under car work involved - this operation can be done from above - hard on back -- water pump is located inside timing cover - runs of timing belt

Jan 09, 2010 | 2000 Dodge Intrepid

1 Answer

Where is the location of the water pump on a 1996 intrepid 3.5?


You have to take out the electric fans. then take off the belts and then you will have to pull the hurmonic balancer off take the timming cover off then take off the timing belt. the water pump is located inbetween the cams it is bolted on with 3 boltsand looks like a pully. this is for a 1996 dodge intrepid with the 3.5 v-6 hope this helps you

Nov 21, 2009 | 2004 Dodge Intrepid

1 Answer

How do you replace the water pump on a 96 dodge imtrepid 3.2 6cy


Don't do it!! You need alot of experience & the water pump drives the camshafts,meaning if the timing belt jumped or if you rotate the crank while doing the pump,good bye engine.Also,you need special tools that only certified chrysler techs have,like me,lol.

Jul 16, 2009 | 1996 Dodge Intrepid

1 Answer

96 intrepid and not getting fire?


hope to be some help, it sounds like the car aint geting any gas,my advice is too check the gas line & fuel pump...let me knw how it go...

Jul 13, 2009 | 1997 Dodge Intrepid

1 Answer

3 05 bolt patter on 96 intrepid for water pump


Really depends on the engine you have.

If you have a 3.3 L engine then the water pump is a 5 bolt pattern

If you have a 3.5 L engine then the water pump is a 3 bolt pattern.

Apr 23, 2009 | 2003 Dodge Intrepid

1 Answer

Location of waterpump on 2001 dodge intrepid 2.7


Hi....
The Water pump on your Intrepid 2.7L.
Is located in front of the engine, But you can't see because is inside of the timing cover.
And the Water pump is driven by the Timing chain.


I hope this help on your question.
Thank you for use fixya..

Jan 15, 2009 | 1999 Dodge Intrepid

1 Answer

I got coolant pouring from the most bottom of my crankshaft on a 96 dodge intrepid. The secondary belt that pulls the water pump and air is gone. I'd like to know what caused this and how much the repair...


If you have a 2.7 engine, your water pump is in need of replacement bad. It's located behind the timing cover and is turned by the timing chain. When the water pump goes out, coolant pours out in the inside of the timing belt and into the oil pan leaving the same water in the oil look as if you had a blown headgasket.

Jul 10, 2008 | 1996 Dodge Intrepid

Not finding what you are looking for?
1996 Dodge Intrepid Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...