Question about 2001 Volkswagen Golf

1 Answer

Window nearside replacement how do I remove the door panel

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 33 Answers

There will be a few screws on the interior door handle, You may have to remove they little push-in screw covers. When you have done that, you have to use a hand-held (small) pry bar, and gently pop the panel out of place. (there are clips made of plastic around the whole thing, and they a very easy to break. I know it sucks but i would recommend taking your golf into your local VW dealer. You can do it yourself, but if the dealer breaks the clips, they will replcae them, if you break them, your door will never sit flush like it did before, and you will have to buy more clips to fix that.

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Audi a5 nearside window stuck halfway. can I give temporary repair


remove door panel and check window system [off rack wire disconnected etc] disconnect the regulator push up window and lock it into place - replace until repair can be make

Oct 16, 2016 | Audi Cars & Trucks

1 Answer

Remove rear nearside door panel


The trim is held in place with studs that will come out when the panel is prised GENTLY away from the frame.

Aug 07, 2014 | 2007 Land Rover Freelander

1 Answer

The nearside front window is stuck down and will not wind back up


Not sure if its power windows or manual windows, you said wind so its gotta be manual, remove the door panel and make sure nothing fell apart and jammed the track, if nothing is found then the track may be broken,

Sep 01, 2010 | Renault Sportwagon Cars & Trucks

2 Answers

MY ACCENT REAR NEARSIDE DOOR WILL NOT UNLOCK, HOW DO i REMOVE THE INNER PANEL WITH THE DOOR LOCKED . OR GET THE DOOR OPEN


It wont be pretty but examine other rear door and be familiar with retaining fixings,ie door grab handle , window winder , and any screw fixings .
Remove what you can and maybe the rear seat also (sorry) The window winder removal is easier than you think ! It's held on by a horse shoe shaped spring clip, remove with a simple shoe lace or narrow piece of cloth pulled in the opposite direction of the horse shoe clip.(don't loose) This is about as much as I can help you , after this it's a tug and pull (against snap fixxings) upward lifting motion of the panel. Good Luck

Apr 05, 2010 | 2000 Hyundai Accent

1 Answer

How do i fit a replacement nearside wing mirror unit, to a mercedes c180 2007 saloon.And what type of tools do i need. Thank you. J.Woods


You'll need a screw driver (philips is most common), a plastic prying lever, socket (should be 10mm, but can't remember)

If you're lucky, on the inside of the door, will be a triangular panel right behind the mirror that you can pop off. If you're not as lucky and it's one piece or the panel is blocked by the door panel, you'll need to remove the door panel to change it.

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror onto the door

Oct 23, 2009 | 2007 Mercedes-Benz C-Class

1 Answer

Had car valeted / nearside front window keeps going up and down on its own


You either have a loose wire jumping around in the switch area or, liquid or something small, like a staple got in, and is causing it to make connection from time to time. You'll have to remove the door panel to check the wiring. If the wires are tight, blow the area out to remove any liquid or debris.

Sep 23, 2009 | 2003 Ford Focus

1 Answer

I need to change the nearside rear view mirror and looks like i have to remove the interbal door panel. how can i do this?


There are hidden screws in the door handle that have to be removed first, then gently pry out at the bottom of the door panel. Lower the window and then push the whole door panel up freeing up the door panel from the upper supports. This will allow access to the inside wiring and bolt to disconnect the mirror. Make sure you don't lose any of the panel connectors and reverse above to put it back on.

Sep 16, 2009 | 2007 Toyota Camry

1 Answer

Golf mk4 rear door nearside will not unlock and


hi thier you must use this door a lot i guess maybe you have a kiddie in the back on this side of the car.? i think you have broken wires in that door if you look in the rubber boot which joins the door to the car you will see the wires broken join them up and it should all work again make you sure you join the right wires i hope that help you . graham the auto electrician

May 12, 2009 | 2002 Volkswagen Golf

1 Answer

Door panel removal from 2005 Honda Accord


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Apr 09, 2009 | 2005 Honda Accord

1 Answer

Daewoo window jamming


you should be coming from the inside of the door. remove the screw from the door handle and the door opener. dont forget the clips at the bottom part of the door panel.

from there, you can see and check the power window motor and mechanism.


tnx 4 using fixya,

drcool

Oct 13, 2008 | 2001 Daewoo Leganza

Not finding what you are looking for?
2001 Volkswagen Golf Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...