Question about 1999 Saturn SL

2 Answers

Car wont start, battery is good, trying to find the ignition relay switch - was told that I could change it out with the horn relay to see if that was the problem, it is not the starter either

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Well actually I just changed my started relay and it's under the dash just left of the steering column . Get upside down under the dash ,look straight up and slightly to the right. there on the wire loom you will see two bundles on the wiring . The relay is not in the blue bundle but just above that in the same wire loom just there.

Posted on Feb 04, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 520 Answers

This can be found in the underhood junction behind the battry

Posted on Sep 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Chrysler 300C changed battery and now horn wont stop blowing how do I reset this alarm?


Have you tried putting the key into the ignition switch and starting the car ?

In some vehicles, you can place key into driver door cylinder and manually lock / unlock which may turn horn off.

Nov 25, 2016 | 2006 Chrysler 300 C

2 Answers

After replacing my battery in my 1998 ford taurus the horn continually blares. I have tried putting the key in the ignition and turning it to on, horn keeps blaring and car won't stop. Also


Your horn relay may be shorting out, making your horn operate all the time. Have a look at your relays. You might find the horn relay is the same as another relay, If it is, try swapping relays with a known good one, and see if the horn operates normally. If so, get a new relay. Good-Day!

Nov 16, 2014 | 1998 Ford Taurus

1 Answer

06 plate citroen c2 wont start


If you check your engine fuse box and find that your 20amp fuse is blown its either a sticking starter relay or water getting in your electrics. Try checking this first as the fuse box is directly above wheel arch and can get damp. Clean up green contacts and keep a spare 20amp fuse handy. After changing this blown fuse you will need to reset the engine management system by disengaging the battery terminal. You're clocks might be out but car will now start. Don't forget to buy that starter relay if problem persists.

Apr 12, 2012 | Citroen C2 Cars & Trucks

2 Answers

Tried to start truck but it continues to turn over without key turned, is it bad solenoid....replace starter?


Yes. Replacing the starter should fix it for sure! I wouldn't wait too long though, sometimes they can start on fire if they don't stop trying to turn.

Jan 09, 2011 | 1999 Chevrolet Tahoe

1 Answer

Everytime i turn my key nothing happens my battery is good car wont start and i was told it was a wire not gettin jucie to the starter to kick over


sounds like the ignition switch contacts have packed up in the ignition switch ,fit a push button type switch so its by passed the ignition switch ,pick up a 12v supply from ignition switch ignition on side ,then to switch then to starter solonoid ,although you can wire it through a relay if you want to be professional

Dec 19, 2010 | 1997 Ford Expedition

1 Answer

My 200 jeep cherokee classic's horn wont turn off?


In the PCM is where the Horn Relay is. It's location should be annotated on the underside of the cover you pulled off to gain access. One way to determine if it is the Relay or not is to find a similiar Relay (shape and size) and switch them. If this fixes the Horn problem it is the Relay and should be replaced.

Dec 21, 2009 | 2000 Jeep Cherokee

1 Answer

Wont start


check the ignition switch. pull covering off of the column and check switches wires,
reds - should have +12 battery power
white - Ignition output
pink - ignition output
yellow - starter output

these wires are needed to start car.

from the switch the starter wire goes to and neutral position switch. located on transmission. yellow is starter in purple is starter output. if all that is good change the relay moun about the radiator. good luck

Sep 24, 2009 | 1998 Chevrolet Cavalier

2 Answers

02 chevy trailblazer 4.2l car wont start installed new starter still wont crank or start test fuses all are good lights and horn operate but no start could it be the ignition switch not giving power to the...


You need to establish that you have 12v in the battery and that all connections are clean and secure. Lights horn etc do not give you voltage verification...your starter uses more amperage than anything else in the car. Once you are certain that everything is OK, check for 12v at the small wire on the starter with the key turned to start. If no volts, check the neutral safety switch or clutch switch Then check ignition switch for power in/out.

Jun 09, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

Recently I lost my wipers, horn and head light control. All fuses and relays are good. The head lights come on with ignition and go off when ignition is off, but no brights or control otherwise. Turn


Much easier to replace the switch assembly. If it is something minor repair it but do not open the switch assembly packaging so that you can return it.

Jun 24, 2017 | Dodge Ram 1500 Cars & Trucks

Not finding what you are looking for?
1999 Saturn SL Logo

Related Topics:

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...