Question about 1998 Cadillac DeVille

1 Answer

What size serpentine belt do you need to bypass a compressor in a 1993 Cadillac Sedan DeVille? it has a 4.9 liter engine .. and is it possibal

Posted by on

  • Sam Scott
    Sam Scott May 11, 2010

    What compressor?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 389 Answers

You will need what is called an idle pully and be fitted instead of the compressor the same belt will fit. This is the correct way. An alternative way is to take the bely off the compressor pully and leave it on the other pully's pull it hand tignt holding the excess of the belt in your hand. Now check the belt won't rub on the engine or component's. If the belt has fully cleared all then Release the tensioner all the way and measure the length of belt needed to go around all pully's except the compressor. Take the measurement and the old belt to an autofactor's the old belt is important to have because the dimentions of the belt depth and width are also important. They will be able to check for a belt to suit your need's. Belt dosent need to be the exact length of your measurement 1 to 3 inches longer should be adjustable. cheers

Posted on Sep 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to find the belt size on a 1994 cadilac sedan deville with bypassing the ac pulley


remove the belt and by using a string or a thin robe put it as the belt round an pulleys and afterwards measure the length of the robe which will be the new size. as regards the width you have the old one.

Aug 24, 2012 | Cadillac DeVille Cars & Trucks

1 Answer

Locked pulley on a 1989 Cadillac Deville Serpentine Belt system


I understand the comment but what is the question...I really need to know what engine size...Is it a front or rear wheel drive...If you dont know which pulley it is you need to take the belt off and spin each pulley to be sure unless it is evident....But I really need more indo........Thanks.......Metalpoet

Nov 15, 2011 | 1989 Cadillac Sedan DeVille

1 Answer

I need a belt diagram for a 1988 Cadillac deville serpentine belt with showings of all belt components for a 4.5 liter engine


I need a serpentine belt diagram for a 1990 cadillac fwd. 4.5 ltre. engine fleetwood sixty special

Aug 08, 2011 | 1988 Cadillac Sedan DeVille

1 Answer

What length serpentine belt do i need to bypass the a/c compressor on a 1994 cadillac sedan deville concours?


best bet is to get 2 sizes bigger and 2 sizes smaller , if not keep yrying theres no number as all caddys came with ac usually

Mar 27, 2011 | 1994 Cadillac DeVille

1 Answer

I need to know what size belt do i need to bypass air conditioner compressor on 1993 Cadillac 4.9.


use a piece of string to measure around the pulleys then take the string to your supplier and get a belt that suits.......

Dec 07, 2010 | 1993 Cadillac DeVille

1 Answer

Need to replace serpentine belt on my cadillac sedan deville need the diagram.


dia gram should be located on the inside of the hood when open or on the top front of engine look care fully its the not hard to find and make sure you have a gm serpintine belt removal tool

Jul 22, 2009 | 1998 Cadillac DeVille

2 Answers

Can I bypass the a/c compressor on my 1987 Cadila Sedan Deville


The car did not come without a/c so there isn't anything really available to get around your problem. If you are creative, you can make up a bracket and idler pulley to put in place of the compresor but you will need to experiment with belts to get the correct length.

Jul 17, 2009 | 1987 Cadillac Seville

Not finding what you are looking for?
1998 Cadillac DeVille Logo

452 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...