Question about 2000 GMC Sierra

1 Answer

My GMC sierra side mirror is loose on from the amr. The mirros is fine it is the little swivel that is looses and the mirror constantly moves. I am unable to remove the mirror to get to the problem.

Posted by on

  • Anonymous Mar 30, 2014

    mirror is loose at the swivel point

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I just spent about 2 hours trying to resolve the same problem, and discovered that there doesn't appear to be any way to repair the mirror without purchasing a whole new one. There a 3 screws you can access by slanting the mirror to the extemes in both the up or down positions. Once they are removed I discovered a 4th screw (once I broke the plastic pieces surrounding the mirror appart) that there is a 4th screw that is impossible to reach without removing the actual mirror part. In any case I discovered that the reason that the mirror was floppy is because there was a funny looking nut that is supposed to lock in the spring mechanism that was completely stipped and non functional. Better luck than me!

Posted on Jan 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cracked differential housing on gmc sierra 3500 4 x 4


Not likely. Usually abuse 4 wheeling or tranny bolts loose and diff.shifting around. You might have smacked something with it when driving whether on road or off road.

Jan 18, 2013 | 2009 GMC Sierra 3500HD

1 Answer

2006 gmc Denali side mirror shakes


No the mirror must be replace as the parts that move it are loss from wear. These mirrors if power cost about $300.00

Sep 17, 2012 | 2006 GMC Yukon Denali

2 Answers

Can the glass be tightened in the power mirror of a 2003 GMC


well i wished i could say yes but they basically consist of plastic bushings to hold in place once their broke thats it replace mirror assemble thank you have a nice day

Apr 26, 2010 | 2002 GMC Sierra 1500

1 Answer

Power mirrors are loose, how do i tighten them?


Hi, if the complete unit is loose you will find bolts on the inside of the door just above the door panel behind a cover (usually a triangular shaped cover), that you will have to tighten. If the mirror glass is loose you should find a hole underneath the mirror housing where you have to put a screw driver in and tighten the screw on the inside to secure the glass.

Jan 17, 2010 | 2003 GMC Sierra 1500

1 Answer

2004 GMC Sierra Power Mirrors do not work


FUSE AND MAYBE LOOSE WIRE CONNECTION

Oct 30, 2009 | 2004 GMC Sierra

1 Answer

Driver side mirror loose how do i tighten it


pry loose inside corner trin panel.The adjuster is held into the trim panel with a small allen screw,loosen this to remove trim panel from adjustor.There are 3 10mm nuts attaching mirro to door.Most likey though you have a broken post that is broken off mirror.Very common for them to break.hope this helps

May 20, 2009 | 1999 Saturn SC

1 Answer

Need to get door panel off to replace side view mirro on passenger side.


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. then pop off the cover beside the mirror and remove the bolts

Apr 30, 2009 | 2006 GMC Sierra 2500HD 2WD

2 Answers

Loose side mirror. Need to tighten it up.


just remove the panel inside at the side of the mirror, then you will find the bolts.

Apr 25, 2009 | GMC Sierra 1500 Cars & Trucks

Not finding what you are looking for?
2000 GMC Sierra Logo

Related Topics:

594 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...