Question about 2000 Ford Expedition

1 Answer

Need to replace my front evaporator core in my 2000 Ford Expedition, What is the best way to axcess it and remove it. your help would be very appreciated ! Thanks, Rlissekam

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 192 Answers

Leave the job up to a proffesional these kind of problems can be complicated. but if you must start at glove box then remove dash.

Posted on Sep 28, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Got a 2003 expedition but wont blow heat front of truck need help please

In almost all cases this problem is caused by 2 parts, one is called the Air temperature Control Blend Door and the second is the small computer controlled electric motor that moves the door between the Heater Core and the AC Evaporator Core to obtain the desired outlet air temperature.. This is a very difficult job to replace these parts, it requires that you have a factory repair manual set, a good set of hand tools and very good automotive repair skills. The time required to complete this job can be as much as 12 hours, 8-10 hours for a well trained Ford dealer technican.

Nov 03, 2011 | 2003 Ford Expedition

1 Answer

How to repair front evaporator core ford expedition 2006

When you say repair,I assume that road debris hit & damaged it

You remove the radiator to get access to the condensor,not
evaporator. That is the part inside the vehicle that gets cold

The condensor removes heat,that is why it is in front of radiator
in air stream

You need that work done buy someone trained on A/C work as the system
has to have the refrigerant recovered & a vacuum pulled before recharging

Not a home driveway job.

Aug 03, 2011 | Ford Expedition Cars & Trucks

1 Answer

2000 FORD Expedition both heater hoses get warm. gets heat at first then turns cold front and back. I flushed the heater core and didnt get any gunk out. Is this the heatercore or is this the blend door

if the heater hoses are both hot its a blend door actuator, and possably the blend door its self, the way to make sure is to feel around under the dash . feel the black hvac box and if its feels warm then the heater core is good, you will have to remove the dash to replaced the bland door actuator and blend door ,i reccomend you replace both beacause its alot of work to remove the dash so make sure both components are replaced while you are in there

Dec 18, 2010 | 2000 Ford Expedition

1 Answer

1998 Expedition: 2000 Ford Expedition I smell antifreeze with heate...

If you smell antifreeze it may be 3 possibilities: 1. you may have a leaking hose/hose connector , or water pump. 2. your heater core is bad and needs replaced. Unless you know what you are doing I would highly suggest taking to dealer for heater core replacement. The dash and steering colum has to be removed to get to the heater core. This is not an easy job believe me (about-900-1200 job). If you have your heater core replaced then also replace the climate control door. This is good preventative maintenance and also a a dollar saver. I would have a pressure check run on your radiator as a first thought. All you may have is a bad hose and that can easily be replaced.

May 18, 2010 | 1998 Ford Expedition

1 Answer

Find out how to replace heater core in the front

The front heater core in your truck is inside the environmental station, which is inside the dash, the entire dash will have to be removed in order to access it, in order to access the heater core itself you will have to remove the environmental station, requiring the draining of the engine coolant and the a/c system. Your best bet is to buy a Haynes or Chiltons manual and follow the steps to perform this repair, or take it to your favorite repair shop. The core itself should cost about 60 dollars. I did my own and it took a good 5 hours to remove and replace everything. I hope this helps, let me know.

Dec 16, 2009 | 2000 Ford Expedition

2 Answers

Heater cord ford expedition 01 5.7liter where is it located and how hard is it to change?

Dear Heater Core Hunter,
For your 01 expedition, that has the 5.4 liter motor in it, the heater core is located in the evaporator case assembly, where the blowermotor itself is located,This is a pretty darn good labor intensive job, if you open the passenger front door and get down onyour knees and look up underneath the dash.....that's what you're going to be removing and replacing, the heater core is inside of this black case.Please get back to me if you have any more questions...I'M HERE TO HELP!!!

Nov 20, 2009 | 2001 Ford Expedition

2 Answers

Got a hole in a/c condencer under dashboard behind glove box. do i have to take out dash board to fix?

that would be your evaporator core,go to your local library and look in a "Chilton's Auto Manual"this book has all the info and pictures for all types of auto repairs of all makes/models and will explain how, all evap cores come out differently

Sep 12, 2009 | 2000 Ford Expedition

1 Answer

Have a 2000 ford expedition and the ac in the front blows hot but the rear ac works fine. what could it be

Listen and see if the vent flap is moving from the hot position, to the cold position. If that's working then the evaporator may be clogged. It sits inside the same box that the heater core is inside of and if it becomes clogged with hair or dust, then it wont allow the blower to blow through it. But it would then bring hot air through the vents because the heater core is there too.

Jun 15, 2009 | 1998 Ford Expedition

2 Answers

Replacing the front heater core in a Ford 2001 Expedition

the best I can recommend at this time is go to auto zone and ask if they can provide a diagram print out for you I have a Haynes book and it states: to pull off the cover of the heater core/evaporator core housing it has small screws and then pull the blend door assembly out to expose the heater core

Jan 09, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers


Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides