Question about 2003 Volkswagen Golf

1 Answer

How do you reset electric windows on a 2003 vw golf ,i fitted a new window regulator in the o/s front door,now the window only works with the key in the door lock,or if battery is disconected and reconected,plus since fitting new regulator door locks malfunction

Posted by on

  • Anonymous Mar 16, 2014

    Window won't wind up on 83 hiace
    New regulator has been fitted

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 104 Answers

Check the part no.to see if its the same as the old one.also might need to code it to the vehicle with a diagnostic machine

Posted on Oct 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When I unlock my 2002 vw golf all the electric windows open together ?


.Just to be sure, do you know that when you insert your key into either the driver or passenger (front) doors, and turn the key over to the far LEFT (in the process of unlocking the door), and hold the key in that position for more than a second or so, your windows will all roll down?? This is supposed to happen - it is a benefit of owning a VW! It is all described in the owner's manual.

Now the other side of this function, is that if when you get out of the car, and any of the windows are left open (including the sunroof if you have one), inserting your key and turning it over to the far RIGHT (in the process of locking the car), and once holding it there for more for a second or so, will then close all the windows for you. This opening and closing process will only continue for as long you hold the key turned over in the extreme position in either direction. Once you return the key to the center position, the opening and closing will stop. So you just hold it there until the windows are all closed. This option is not available via your keyless remote though - only via the key in the door locks.

It's something I love about the VW design - you can choose to let fresh air into the car before getting in without having to insert your key into the ignition and on the other side, if a window (or the sunroof) is accidentally left open when you've exited the car, you now have the option to close them all without once again inserting your key into ignition and turning it over.

Feb 18, 2012 | 2002 Volkswagen Golf

3 Answers

1997 mercury grand Marquis driverside rear window motor works but window won't go up. Inner door panel off. Metal cable with a black foam cover and pink plastic clip off. Can't figure what it fits to.


usually this means you need a new window regulator.

Section 01-11: Glass, Frames and Mechanisms 1997 Crown Victoria, Grand Marquis Workshop Manual
REMOVAL AND INSTALLATION Window Regulator, Power Front Door
Removal
  1. If front door window glass (21410) is in the down position and is inoperable, the following steps must be taken; if front door window glass is operational, go to Step 2.
    1. Remove front door trim panel (23942) and front door trim shield (237A04). Refer to Section 01-05 .
    2. Disconnect battery ground cable (14301). Refer to Section 14-01 .
    3. Disconnect window regulator electric drive harness connector.
    4. sva~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Be careful not to strike or scratch front door window glass because it can break.
      Remove window regulator electric drive retaining screws through holes.
    5. Remove window regulator electric drive (23394) from front door power window regulator.
    6. Raise front door window glass to full up position by hand and secure with tape.
    7. Go to Step 5.

  2. Remove front door trim panel and front door trim shield. Refer to Section 01-05 .
  3. Remove front door window glass as described.
  4. Disconnect window regulator electric drive harness connector.
  5. NOTE: Use care not to enlarge sheet metal holes in the door inner panel.

    Remove two 1/4-inch rivets retaining lower bracket of front door power window regulator to inner panel. Use drift punch to knock out center pins for each rivet. Using a 1/4-inch diameter drill, drill out remainder of rivet.
  6. Remove three window regulator electric drive retaining screws from inside door to remove window regulator electric drive from front door power window regulator.
  7. Remove two window regulator retaining nuts.
  8. Remove front door power window regulator from front door (20124).
Installation
  1. Lubricate regulator mechanism with Teflon® Lubricant E7FZ-19590-A or equivalent meeting Ford specification ESB-M1C111-A.
  1. Install front door power window regulator minus motor (23208) into access hole in inner panel.
  1. Position front door power window regulator using upper studs and tabs on window regulator electric drive mounting bracket.
  1. Install rivets retaining front door power window regulator to door inner panel (1/4-20 x 1/2 inch screw and 1/4-20 nut and washer assemblies or equivalent metric fasteners may be used).
  1. Install two upper front door power window regulator retaining nuts.
  1. Install window regulator electric drive with three screws. Do not overtighten screws.
  1. Connect the window regulator electric drive harness connector.
  1. Install front door window glass.
  1. Adjust front door window glass as described.
  1. Install front door trim shield and front door trim panel. Refer to Section 01-05 snorkelbobby_38.gif

Feb 14, 2011 | 1997 Mercury Grand Marquis

1 Answer

How do I replace drivers side rear electric window in a VW golf 1.6 match 2003


Get a window from a junkyard or craigslist, take it to an auto glass shop and pay them $50 to install it. If you are talking about a regulator, then buy a new regulator on ebay, and again take it to an auto glass shop and have them install ir for you for about $50.00.

Sep 16, 2010 | 2003 Volkswagen Golf

1 Answer

Mk3 golf when central locking is activted the electric windows go


you have just found this out.it is a standard feature of all vw/audi/seat/skoda cars
unlock/hold key over,the windows will go down
lock/hold key over the windows will go up
then unlock the car with the remote,car reset.
sit in car with engine on,switch off engine(do not open any door)driver can open/close any window(you can even put your hand into window frame and it will rollback,all on its(not for fun)
if windows rollback after you have used button to close them you may have sticky runners/rubbers.
this is not in the hand book,tell all your friends.....only a german car.....

May 06, 2010 | 1996 Volkswagen Golf

1 Answer

I have a vw golf Wolfsburg 99,2.0 & my passenger front window won't go down. Is there something I could test or should I just assume it is the electric window regulator? thank you


turn on the interior light,then push passenger window switch to lower window if light dims then its not regulator(motor)that will give you something else to look for!! also make sure drivers door iso switch is on

Mar 22, 2010 | 1999 Volkswagen Golf

1 Answer

What is the procedure for replacing rear window regulator on a 2003 VW beetle convertible.


.leave window up half way.tape window to hold it.remove door panel clips.rip out foam moudling.drill out rivets holding regulator.remove connector.remove regulator clips.remove regulator.put in new regulator and clips.put in new rivets.plug connector.test it.if all is good install moulding and door panel.

Oct 04, 2009 | 2003 Volkswagen New Beetle Convertible

1 Answer

2003 ford taurus drivers window will not go up.


you either need a motor or motor and window regulator assembly.
SECTION 501-05: Interior Trim and Ornamentation 2002 Taurus/Sable Workshop Manual
REMOVAL AND INSTALLATION Front Door Trim Panel Removal and Installation
  1. Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
  1. Remove the front door trim panel screws.
  1. NOTE: To release the door trim panel two part pin-type retainers, first pull outward on the bottom of the door trim panel.
    Remove the front door trim panel.
    • Disconnect the electrical connectors.
c64985a.gif --------------------------------------
SECTION 501-11: Glass, Frames and Mechanisms 2002 Taurus/Sable Workshop Manual
REMOVAL AND INSTALLATION Front Door Window Regulator And Motor
Special Tool(s) s2h~us~en~file=st1132a.gif~gen~ref.gif Heavy Duty Riveter
501-D011 (D80L-23200-A) or equivalent
Removal and Installation
  1. Remove the front door window glass. For additional information, refer to Front Door Window Glass in this section.
  1. Disconnect the front door window regulator motor electrical connector.
  1. Remove the window regulator rivets.
-----------------------------
SECTION 501-11: Glass, Frames and Mechanisms 2002 Taurus/Sable Workshop Manual
REMOVAL AND INSTALLATION Door Window Regulator Motor Removal and Installation
  1. Close the window.
  1. Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
  1. Remove the door trim panel. For additional information, refer to Section 501-05 .
  1. If equipped, remove the radio speaker.
  1. Position the watershield aside.
  1. Disconnect the door window regulator motor electrical connector.
  1. Remove the bolts and the door window regulator motor.
---------------------------------------------------

May 04, 2009 | Ford V6 Pony Cars & Trucks

1 Answer

Fallen driver's side window


probably need a new window regulator. ebay. 93 to 98 should fit.

Section 01-05: Trim, Interior 1998 Villager Workshop Manual
REMOVAL AND INSTALLATION Trim Panel(s), Door Front
Removal
  1. Disconnect the battery ground cable (14301) if equipped with power locks or power windows.
  1. swv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Use care when removing the front door inside handle escutcheon (22620). Failure to do so can result in damage to the component.
    Carefully pry off the front door inside handle escutcheon by inserting a standard 1/4 inch screwdriver between the top rear portion of the front door inside handle escutcheon and the front door trim panel (23942) .




  1. If equipped with manual windows, slip a clean shop rag between the window regulator handle (23342) and the front door trim panel .
  1. Pull the shop rag back and forth to release the window regulator handle clip.




  1. Remove the three cover caps and front door trim panel screws.
  1. Remove the one front door trim panel capped screws from the door pull handle.
  1. If equipped with power windows, remove the door pull handle. Disconnect the electrical connectors.
  1. Slide a flat-bladed tool behind each of the retainers and twist the tool to disengage the front door trim panel from the front door (20124) .
  1. Remove the front door trim panel.
Installation
To install, reverse the removal procedure.
---------------------------------------------------------
Window Regulator, Power Front Door
Removal
  1. Disconnect the battery ground cable (14301) .
  1. Remove the front door window glass (21410) . Refer to the front door window glass removal procedure in this section.
  1. Remove the two front door brace bolts and the front door brace.


    415712f.gif

  1. Disconnect the front window regulator electric drive electrical connector.
  1. Remove the four front door window glass regulator track bolts.

    67b6136.gif


  1. Remove the three front window regulator electric drive bolts.
  1. Remove the front door window glass regulator track and the front window regulator electric drive (23394) as an assembly through the opening in the front door (20124) .
Installation
  1. Install the front door window glass regulator track and the front window regulator electric drive as an assembly through the opening in the front door .
  1. Install the three front window regulator electric drive bolts. Tighten the front window regulator electric drive bolts securely.
  1. Install the four front door window glass regulator track bolts. Tighten the front door window glass regulator track bolts securely.

Apr 29, 2009 | 1998 Mercury Villager

1 Answer

Electrics on my VW Passat TDI 2001


check all the fuses on the fuse panel (located on the end of the dashboard). Behind the plastic door, drivers side. Then see if all the windows will go up and down; locking and unlocking the door with the key in the door lock. You have to hold the key in the unlock position to make this option work.

Dec 08, 2008 | 2003 Volkswagen Passat

Not finding what you are looking for?
2003 Volkswagen Golf Logo

870 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...