Question about 1999 Toyota Corolla

2 Answers

Can i start a 1999 coroalla without a seat belt

I ahve a 1999 corolla and i need too move it but the drivers side seat belt has been removed and i noticed that i is conncted too the air bags i was just wondering if i can start and move the car without dying

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 713 Answers

Was it unplugged? If it was unplugged then you can move it without any damage to the car or yourself because no power is going to the bags to activate them.

Posted on Sep 27, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 299 Answers

Yes you should be ok you will just have the airbag light on

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove female seat belt recepticle


Due to Federal Safety regulations, the normal way for this belt to be secured to the car is by a big bolt which is fastened to the body of the car with a nut that cannot be removed. Often, the anchoring bolt is underneath the carpet, and may require quite a bit of the interior of the car on that side to be removed to gain access.
If you have a junk yard/salvage yard nearby, go there and find out what to do, because cars there should have some seats removed.
Be blessed.

Dec 13, 2013 | 1999 Chevrolet Malibu

1 Answer

Airbag light on


B 1811. Open in driver side squib, 2nd step circuit.
The driver's side seat belt circuit is open. Remove the driver's side pillar cover, and look at the connector attached to the reel. Clean it with contact cleaner and place it back. If it does not solve the problem check the harness wiring for damage or broken wire.

Dec 09, 2013 | 2005 Toyota Corolla

1 Answer

Seat belt problem not locking


they have a mechanism called a seat belt cam which is gravity activted with force and usually at 15mph and with sudden braking the cams should lock. If u feel that they have to much play and seem like they dont lock properly id suggest changing both belt assemblies because the cams do wear or get stuck and fail like any other moving part and it is a saftey issue for u so better safe than getn injured with a faulty belt.

Apr 30, 2012 | Seat Cars & Trucks

2 Answers

I am in the process of replacing front seat belts on 2003 Toyota Corolla. After I removed the old ones and installed the replacement, the replacement seatbelt will not budge. I cannot pull it down or get...


Hi.

The inertia reel has not been mounted properly. Replacing Toyota belts is quite tricky. Follow the step by step procedure illustrated in manual below. Belts are included in seat removal procedure (clearly do not remove seat). Check chapter starting at page 183/184 in manual below.

Please refer to pages from 184 onward in this service manual.

Regards.

Ginko.

Mar 26, 2011 | 2003 Toyota Corolla

1 Answer

Driver side seat belt retractor broke. how to fix?


yes you can. I suggest you go to the scrapyard and purchase one there. they are easy to replace and inexpensive.

Jul 09, 2010 | 1994 Toyota Corolla

2 Answers

My seat is loose. It moves when I start and stop. How do I tighten it? vMy truck is a Chevy 2000 Silverado 1500 w/ electric operated seats.


hi there should be some bolts behind the side covers of seats they maybe loose?? or are your actual tracks/rails sliding?

Oct 10, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

SEAT BELT BUZZER WHERE IS IT


does it do it on the driver side? hook it up without sitting in the seat start the rig if the buzzer is on sit in the seat if it is still on you have a bad ground on the seatbelt side the short belt that it connects to. the buzzer is under the dash driver side above the sterring wheel.

May 24, 2009 | 2003 Ford E150

1 Answer

Seatbelt won't retract


1)move the plastic cover over the seat belt out of the way to gain access to the two mounting bolts for the seat belt mechanism. Use a 10mm wrench and a 14mm wrench and remove the two bolts holding the seat belt mechanism to the body. Use a small drill bit or small screwdriver and make one hole in the plastic cover on each side of the seat belt mechanism (the covers say "do not remove plastic cover". Spray lots of wd40 in each hole. Then exercise the seat belt. When the mechanism allows the belt to be retracted, retract the belt all the way out and exercise the seat belt. Reinstall mechanism with both mounting screws in original position and put plastic cover back in place. Good luck. New seat belt costs $100.00 from dealer and are hard to find working in junk yards. I have fixed several of them this way.

Jan 17, 2009 | 1996 Toyota Corolla

1 Answer

Replace rear seat belt in 1993 Toyota Corolla


OK. On the front edge of the seat bottom cushion, pull up hard, both sides. This will dislodge the 2 clamps that holds the seat cushion to the floor. Pull the seat cushion out & set it aside. You will now see the female latches bolted to the area where the rear of the seat cushion meets the rear seat back bottom. Remove the bolts (14 mm I think).

Oct 07, 2008 | 1993 Toyota Corolla

Not finding what you are looking for?
1999 Toyota Corolla Logo

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...