Where is the fuel filter located on the Mitsubishi Raider (2007)?

Most mitsubishi fuel filters are under the hood on drivers side,but if not trace the fuel line down to frame under truck it will be there,

1989 raider / montero wont start need help please ' Mitsubishi 4x4 ...

www.4x4wire.com/forums/showflat.php?Number=1128085

Nov 20, 2008 - I have a 1989 dodge raider / montero the thing wont start. ... If it doeslight off, I'd suspect a fuel pump problem. Regards, Eric W. '89 Dodge Raider -- 3.0L V6, MT, SWB ... It sounds like a bad ECM if it's the V6. ... Also the truck was weird i started it up ran it for a moment and it died first thing i assumed it was ... 89' Gen I Montero rough idle/misfire and stall problems ...
Jun 28, 2011
Really rough idling and shakes ' Mitsubishi 4x4 & SUV Tech ...
Dec 20, 2010
1990 montero fuel pump fuse ' Mitsubishi 4x4 & SUV Tech ...
Jul 15, 2008
Raider won't start in this artic weather ' Mitsubishi 4x4 & SUV ...
Feb 5, 2007
More results from www.4x4wire.com

1989 Dodge Raider - Fixya

www.fixya.com/cars/t1360572-1989_dodge_raider

Jan 28, 2009 - 1989 Dodge Raider A few weeks ago, I was driving home when all of a ... I'll go back an hour or so later and it will start, warm up then die. ... I have replaced the plugs, wires, distributor, brain, basically .... If you are getting power to anything else (such as the interior light) .... 1989 Dodge Raider 3.0 L V6 EFI.

Its built in with the fuel system in the fuel tank.

Best Manuals
Hi jose,
Best thing to do would be to get a manual online book that can help you repair yourself so you don't have to rely on others again.. I bought manuals from here when my dad worked as mechanic. You can try this website so

Driver side, starting in the front "by bumper/ working back to cab" 1.3.5! passenger side front to back 2.4.6! i own the same truck and im telling you SELL THAT P.O.S! its gonna cost you a ton of cash once you pass 90K miles!

your raider is a rebadged dodge dakota ,there should be plenty of ex. systems available for that model

Most of the time they are located in the front part of the engine by where your timing chain would be or towards the top of the engine in the front part.

probally an aframe towing setup

The AIT sensor is located inside the large black plastic box on top of the engine. There is a 2-wire plug connector that plugs into the driver side of this box that connects the sensor wires. Mods simply remove the plug and attach the new AIT diode to the plug without plugging it back into the black box. Note: Your check engine light will stay on and not much improvement (if any) to performance. I took mine back out and restored back to stock. Don't waste your money on gadgets for the AIT.

Compare Fuel Estimates for 2006 Mitsubishi Raider Trucks Here's a comparison of EPA fuel economy ratings among the trucks in the 2006 Mitsubishi Raider lineup. As always, your mileage will very likely differ. 2006 Mitsubishi Raider 2WD 6-cylinder Trucks * 3.7L, 6-speed manual, 16 city / 22 highway * 3.7L, 4-speed automatic, 16 city / 22 highway * 3.7L, 6-speed manual, 16 city / 20 highway