Question about 2002 Dodge Durango

1 Answer

Window went down on drivers side, the motor still works but something seems detached, what should i do?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can readjust the window mechanics.

Posted on Sep 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

95 ford explorer the drivers door window will not go up when pushing the automatic push button all the other windows work all but the drivers side. Can window be hand pushed up till repairs are made if the...


ford has an advantage and a curse to thier window buttons. you can disassemble and clean the contacts(I would have a student with electrical background do this) then reassemble it carefully and it will work if contact points are not fried.

May 25, 2010 | 1995 Ford Explorer

1 Answer

I replaced the driver's side window motor because


I don't know everything there is to know about window motors, but I have seen this before, both mine went out at the same time, not together but a couple weeks apart, like they were dated. Anyway, I replaced both motors, then both operators. Now they both work fine. I would hang on to the old motor, you never know, it might be good, You might have a bad switch on the door, I had to take my switches apart on my other truck and clean the contacts, got both motors working again, Hope this helps.

Mar 20, 2010 | 2003 Hyundai Tiburon

1 Answer

I have a 2001 Honda CRV. The driver side window no longer rolls down. I've tried replacing the fuses but it still doesn't work. Is this something I can fix myself?


sound's like your window motor and/or regulator went out. they can be tricky to change if you don't know what your doing.

Oct 23, 2009 | 2001 Honda CR-V

2 Answers

My drivers side window will not go up or down anymore. All the other windows will go up and down from the main switch on the drivers side door. What can I do to make it work?


probly need to take the door apart and see whats keeping it from rolling up. If the motor went bad theres your problem but if a clip or something broke loose and fell it may have wedged itself in the lifting mechanism

Oct 15, 2009 | 2003 Oldsmobile Alero

1 Answer

Power window


All window motors work through the main four button switch, replace it with a donar .

Oct 04, 2009 | 1988 Buick LeSabre

1 Answer

Drivers side power window is stuck down. What can I do ??


Vehicles with power windows
  1. Connect the window operating switch electrical connector.
Vehicles with manual windows
  1. Install the window regulator handle.
All Vehicles
  1. Remove the window glass retaining bolts.
    • Align the retaining bolts with the access holes.
Vehicles with power windows
  1. Disconnect the battery ground cable.
All Vehicles
  1. Raise and support the glass in the fully closed position (power window shown).
  1. Detach the window motor and regulator (power window shown).
    1. Remove the regulator assembly bolts and allow the assembly to rest in the bottom of the door.
    1. Remove the regulator motor (three bolts), or manual regulator winder (two bolts) and allow the assembly to rest in the bottom of the door.
Vehicles with power windows
  1. Disconnect the regulator motor electrical connector.
Vehicles with manual windows
  1. Disconnect the window regulator handle.
All Vehicles
  1. Remove the window regulator (power window shown).
Vehicles with power windows
  1. Remove the motor mounting plate nut (power window only).
  1. Remove the motor mounting bushes.

Apr 16, 2009 | 1998 Ford Contour

1 Answer

Power Window on Driver side on 2000 mitsibushi eclipse


I would say the window motor is wore out and needs replaced, you must understand, That window gets used more than any other window in the car and its going to ware out faster and more often than the others.

Mar 30, 2009 | 2000 Mitsubishi Eclipse

2 Answers

1998 PONTIAC POWER WINDOW PROBLEMS


Double check all your fuses and and wires in connection with your power windows. Unfortunately though pontiacs are notorious for the power window motor regulators to go out, my buddy had 99 firebird and both windows had the same problem, and I previously owned a 98 sunfire and both window motors went out within the same week.

Jan 30, 2009 | 1998 Pontiac Firebird

3 Answers

2000 GMC Jimmy SLE driver's power window


The same thing happened to my 1999 JMC Jimmy recently. I believe the problem is that your power window motor has most likely gone out or is starting to go out. The motor will need replaced. They are pretty expensive new. I went to a junkyard and got one for around 15 dollars. When mine went bad, I had rolled my window down about three or four inches and it stuck there. I took my door panel off and tapped on the motor while holding up on the window switch and got it to go up after a few minutes. I am replacing my motor today, I'll leave an update here about the outcome when I finish the job. I hope this information helps you.

Sep 27, 2008 | 2000 GMC Jimmy

1 Answer

Drivers side rear power window not working


the window wouldnt do that as a sign of defect. most likely the motor went out. but also maybe the clips on the windows bottom broke causing it to fall. the only way to know for sure would be to open it up it could come down to being something as simple as a switch

Sep 20, 2008 | 2002 Chrysler PT Cruiser

Not finding what you are looking for?
2002 Dodge Durango Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...