Question about 2005 Dodge Caravan
Raise tailgate. Pry under head of fastner with flat bladed small screw driver. Otherside hook shaped, In rubber grommet. Roll away from fastner side.Disengage red lock tab then press release tab.
Posted on Sep 27, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are some expandable black plugs (about 1" diameter) that hold the taillight assembly to the body. You can access them by raising the hatch, and gently pry them both out.
The assembly will swing out and drop if you don't hold it up...hold it firmly and observe how the front part of it is held in by the plastic guide.
The bulb is easy to pull and replace. I avoid touching any bulb with your fingers to avoid leaving oil deposits. I would have a friend test the brakes and the signal (with the ignition on), after the bulb is installed, but before you replace the assembly.
When the assembly is aligned back in place, you can push the re-usable plugs back into the hole, and they should expand to secure the taillight.
If this helps, please rate my answer. If not, I still appreciate constructive comments, too.
Posted on Apr 08, 2009
open your rear hatch and there will be a couple bolts holding your whole light assy in from the inside.....very easy fix
Posted on Nov 14, 2009
If you are Replacing the REAR BULB Look Along the RUBBER SEAL FOR 2 SCREWS and REmove them this will Free the INTIRE TAIL LIGHT and Give you Access to the Bulbs.it is self Explanitory After this. If it is THE FRONT BULB Open hood and Look at the top of Headlight Lense Just Behind it but On TOP and REMOVE the 1 10mm Bolt to Free the Intire HEADLIGHT and you will See the Turn Sygnal BULB on the OUTSIDE END of the HEADLIGHT LENSE and It TOO Is self EXPLANITORY.
Posted on Jul 16, 2010
Open liftgate, locate the two black pins,pull the raised portion strait out, remove both pins, they secure the tail light assembly. remove lens replace light and put back together.
Posted on Sep 07, 2010
Tips for a great answer:
Feb 28, 2015 | 2006 Dodge Grand Caravan
Jan 24, 2014 | 2005 Dodge Grand Caravan
May 14, 2012 | 2005 Dodge Grand Caravan
May 01, 2010 | 2005 Dodge Grand Caravan
Nov 15, 2009 | 2005 Dodge Grand Caravan
Nov 14, 2009 | 2005 Dodge Grand Caravan
Mar 07, 2009 | 2007 Dodge Grand Caravan SXT Minivan
Mar 04, 2009 | 2000 Dodge Caravan
401 people viewed this question
Usually answered in minutes!