Question about 1977 Mercury Grand Marquis

1 Answer

When I turn the ignition to turn the vehicle on, all power cuts out. Help?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 4,340 Answers

Low battery and faulty connections can cause this issue. Clean battery terminals completely...

Posted on Sep 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I drilled out my ignition cause I lost my key I now found the key and it won't turn need help asap


you damaged the ignition switch and it will not recognize key you have to replace the tumbler and ignition switch the key acts like an electronic switch in most modern vehicles put key in and its recolonized and will turn and start vehicle ---damage to key or tumbler sets off anti theft and you have no start ---in future dont try to hot wire or pop ignition when keys are lost (thats all hollywood) go to dealer with vin and proof of ownership and they can cut you a new key

Aug 28, 2015 | Cars & Trucks

1 Answer

The car is parked, turned off, and the doors locked. Came outside this morning and the radio was on with no key in the ignition. What would cause the radio to run without a key in the ignition?


The conveience delay module may have a problem if equipped. It is designed to operate some of the features with the ignition turned off( radio,wipers,power windows etc) until the driver opens the door and power is then cut to these features.

Jul 25, 2015 | 2002 Kia Sportage

3 Answers

Is the stereo supposed to stay on once the ignition key is turned off on a Peugeot 307 year 2004?


I don't have specifics on that vehicle because it is not sold here in the US but most newer vehicles have a "Delayed exit" feature that keeps those components active until the door is opened.

Dec 31, 2014 | 2004 Peugeot 307 SW

1 Answer

NO power to vehicle inside or out.. battery is good, starter has been replaced, ignition control module replaced (not the actual ignition cylinder though) I have a 2000 Alero.. i had problems with the...


I have a 2000 as well and I noticed a lot of vehicles in 2000 came out with smartcar chips in them as well as the key. I would check into your car and see if maybe you have the wrong key or if maybe if you do have a smart key if it has some loose wiring in the computer system. That's all I can think of sorry.

Oct 08, 2012 | 2000 Oldsmobile Alero

1 Answer

Anti-thief system cut off power to den gine an won't cut it back on


If you are dealing with the anti theft the anti theft will flash as you are trying to start the vehicle if this is the case then it is the anti theft if not then you are not dealing with a ant theft issue. You can do a 30 minute relearn procedure without a scan tool. here is how Turn ignition on without the engine reunning.attempt to start the vehicle then release the key to ON.(vehicle doest start) Observe the security light.afeter 10 minutes the security light will turn off.Turn off the ignition and wait 5 seconds.do this 3 times for 30 minutes. start the engine with the engine started the vehicle will learn the passlock key.

Feb 24, 2012 | Cars & Trucks

1 Answer

Starter turns but no ignition, PK3 M security


I have an 03 montana intermittant no start, security light flashes at the time of no start. Under the steering colom is a plug that comes fron the ignition with 4 wires pink , orng , blk, ppl. follow the wires and there is a plug. Try unpluging it then plug back in and try to start vehicle. If it starts then what i have done with it was wire in a relay that cuts power on ignition off and will power the module up on ignition.

blk to # 85 on relay, cut orng and attach one to # 30, the other to # 87, then attach pink to # 86. I have this working for 3 months so far no more intermittant start.

May 10, 2010 | 2002 Pontiac Grand Prix

2 Answers

Have had 4 keys cut for my '02 gm x-cab & they fit the door, but don't turn in the ignition very easily. do I need factory gm keys (because of a chip or what?)


No, the chip will not cause you not to be able to turn the ignition. The new keys need to be worn down a little to work properly. Over time keys wear down and stop working right. New keys cut in a automatic key maker are normally too "high" for the tumblers in the lock making it hard to turn. You can add graphite to your ignition which should make it easier as your ignition becomes used to your new keys. You can find graphite at Autozone for about 4 or 5 dollars.

Sep 27, 2009 | 2002 GMC Sierra 1500

2 Answers

Wont turn over with key?


W/out knowing details on your vehicle, it makes it very difficult to help. Year? Stick or auto>? engine/trans info. Does it have an alarm installed or a factory security system?

Common checks would be park/neutral switch (Or clutch switch if its a stick), fuses (some cars actually fuse the start signal), old alarm brain that has activated and cut off starter signal, and do the cluster lamps go into SELF TEST and all light up when you turn the key to CRANK. If the lamps do the normal cranking bulb check, then likely your ignition switch is working. depending on the year, ford ignition switches sometymes could be a common problem. But without info to look up a diagram, cant offer more help than generalities

Sep 17, 2009 | 1988 Ford F 150

2 Answers

2002 Saturn S-series Passlock needs to be reset


Try this first, it takes about 30 min to do. 30-Minute Learn Procedure 1. Turn ON the ignition, with the engine OFF. 2. Attempt to start the engine, then release the key to ON; the vehicle will not start. 3. Observe the SECURITY tell tale light. After approximately 10 minutes, the light will turn OFF. 4. Turn OFF the ignition switch, and wait 5 seconds. 5. Repeat steps 1 through 4 - two more times - for a total of 3 cycles of 10 minutes. 3x10 = 30 minutes. The vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch turn from OFF to CRANK Important: Turn the Ignition Switch OFF. The vehicle learns the Passlock Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle. 6. Start the engine. The vehicle has now learned the Passlock Sensor Data Code and/or password. 7. With a scan tool, clear any DTCs if needed. History DTCs will self clear after 100 ignition cycles. Without a scan tool you may have momentary starter interruptions while history clears itself. Good luck and hope this helps, keep me posted, be glad to help 

Jun 22, 2009 | 2002 Saturn S-Series

1 Answer

Ignition module


Hi...
The Ignition module of your Century.
Is located UNDER THE IGNITION COILS.
The ignition coils are tie on the ignition module.
But LET ME tell you, something about your problem with the battery,
The Ignition Module is the LESS posible to Drain the Battry,
Because only use 3 connector, and the Ign. module is powered
with the ignition switch, is mean when you Turn the key to OFF.
All the power of the Ign. module Cut off.
If the ignition has no power when the car is OFF, impossible
Drain the battery,

I recomend check that all the lights went off after you close all the doors. Check the glove box light, Trunk light.
Some times the Factory Radio on chevys give up this problem, If the car is equipaded with a Aftermarket alarm.
You should check the circuit.

I'm a mechanic,
I hope this help on your problem.
Thank you for use fixya...

Sep 02, 2008 | 1999 Buick Century

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

fordexpert

Level 3 Expert

5520 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...