Question about 2006 Chrysler Pacifica

1 Answer

Looking for maybe a step by step manuel to

Looking for maybe a step by step manuel to replace front pads.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 299 Answers

Go to www.autozone.com and look for the vehicle repair guides

Posted on Sep 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just got an estimate have all 4 rotars "machined" and brake pads replaced - parts and labor were quoted at $542.40. Does this seem like a fair price.


These parts are brand new from autozone...Front brake rotor=90.00 for 2...rear rotor=60.00 for 2.....brake pads front=30.00/set...brake pads rear = 25.00/set...total = 205.00 parts
so the labor is 337.40....and the parts I looked up are not machined but NEW!!!...maybe you should do the work yourself....337 seems like alot of money....I do brakes for $50.00 labor per axle...especially if you are replacing all the parts...it's not very hard to accomplish...the front rotors easily pop off when you take off the caliper(which has to come off to do the pads) and then the rears are not really too difficult either...My opinion...either do it yourself or get another estimate...maybe there's an out of work backyard maechanic on your street you can give the job to..or if your in the indiana area...call me ...i'd be happy to do the work for ya 2196972613jeffrey

Jan 21, 2011 | 2004 Honda Pilot

1 Answer

How can I change the rotors and brakes on a 2006 Cadillac?


Front brake
Step 1: Identify Front Disc Brake Components
brake_pads_rotor.jpg
Front Wheel Drive Brake Assembly
Most front disc brake components include: brake rotor, brake pads, brake caliper, caliper mount and brake flex hose. Brake service usual occurs between 20,000 and 40,000 miles depending on driver habits, road conditions and brake pad/ rotor materials used.
Step 2: Remove Brake Caliper to Replace Pads
brake_pad_set.jpg
Removing Brake Caliper Mounting Bolts
Locate primary caliper mounting bolts; apply wrench pressure counter-clockwise (When looking at the head of the bolt) to remove the bolts, upper and lower. Make sure the bolt threads are in good shape and replace if necessary.
Step 3: Remove Front Brake Caliper
remove_brake_caliper.jpg
Remove Front Brake Caliper
After removing the primary caliper mounting bolts lift the brake caliper off of the rotor and then tie or secure to the side, being careful not to bend or kink the brake caliper flex hose. Thoroughly inspect brake caliper and brake hoses for leakage, cracks or chaffing and replace as needed. Next remove the brake pads (If not mounted in the caliper) and secondary caliper mounting bolts. Notice how great protective gloves work, most technicians use them on the job today.
Step 4: Remove Brake Pads
remove_brake_pads.jpg
Remove Front Brake Pads
Once the brake pads have been removed, make sure if there is anti rattle hardware to transfer to the new brake pads. Some brake pad manufacturers will include the proper lube (Caliper slides) and anti-rattle hardware to ensure proper performance of their product.
Step 5: Remove Caliper Mount
remove_brake_pads_holder.jpg
Remove Caliper Mount Bracket
Finish removing secondary caliper mount bolts and remove caliper mount. Note: clean and lube caliper slides and pad friction surfaces of all foreign material or build-up.
Step 6: Remove Brake Rotor
brake_rotor.jpg
Remove Brake Rotor
With the caliper mount out of the way you can now remove the brake rotor. Sometimes it can get stuck so you may need to tap it with a hammer or use penetrating oil to free it up. Some manufacturers use small screws to hold the rotor on as well. Clean and inspect wheel studs, replace if any are damaged. Also clean bearing hub rotor mount surface to ensure the proper mounting of the new brake rotor. Inspect the ABS sensor wheel for cracks or damage and replace as needed.
Step 7: Depressing the Brake Caliper
compress_caliper.jpg
Resetting Brake Caliper
To install the new brake pads you must retract the brake caliper piston. Remove the master cylinder lid or open the brake caliper bleeder screw to allow excess brake fluid to be released if necessary. Install C clamp tool and gently tighten clamp until caliper piston is fully depressed. Note: use old brake pad to protect the caliper piston. Close the bleeders once the piston is retracted completely
Step 8: Installing New Brake Rotor
new_brake_rotor.jpg
Install Brake Rotor
Install new brake rotor, the new rotor is manufactured with a protective film over the rotor to keep it from rusting, remove protective film with brake cleaner before installing; also after the brake job is complete you may experience a small amount of smoke from the rotor when first used. This is normal and will go away after the first couple of uses.
Step 9: Installing New Front Brake Pads
new_brake_pads.jpg
Installing New Brake Pads
Reinstall the front brake caliper mount, and then install front brake pads. Make sure the pads are seated properly in the caliper mount; it must be a close fit to work properly..
Step 10: Reinstall Front Brake Caliper
front_brake_rotor_pads.jpg
Re-Install front Bake Caliper
Reinstall front brake caliper and reinstall caliper-mounting bolts, recheck all mounts and mounting bolts. Check the caliper slides to be sure there is no bind and that the caliper moves freely back and forth on the caliper slides. Bleed brake system per manufacturer's specifications to relieve any air trapped in the system. Before driving the vehicle, push the brake pedal down and let it up slowly, repeat until normal brake pedal operation resumes, this operation is forcing the brake pads to travel to the brake rotors.

Dec 18, 2010 | 2006 Cadillac STS

1 Answer

How do you put front brake pads on cadillac sedan deville 1996


Front brakes on all modern cars are disc brakes. The front brakes generally provide 80% of the stopping power, and so tend to wear faster than the rear. Replacing them - pads, rotors and calipers - is quite simple once you understand the process, and can save you a great deal of money. These instructions will include a full front brake replacement. Also, having a service manual for your vehicle will save your sanity, as well as time and money. If you only need pads, or pads and rotors, but not calipers, skip the steps for replacing calipers. Repeat the steps below for each side of the car as necessary.
Complete Directions

Jul 24, 2010 | 1996 Cadillac DeVille

1 Answer

How to replace front brake pads for a 2000 expedition


raise and support the front ,remove both tires , there is two bolts on the backside of the caliper,I find it easier to pry on the back pad to drive the piston so you can wiggle the caliper off,do not let the caliper hang by the hose look at both sides of the rotor if they have groves they need to be turned if they are ok then you need to push the piston back into the caliper use a c clamp(loosen the bleeder valve on the caliper it makes it easier) put the pads on the rotor then put caliper back on and thighten bolts. repeat on other side. ( might pay to get a repair manuel if you have any doubts)

Feb 03, 2010 | 2000 Ford Expedition

1 Answer

Front pad replacement the correct method for replaceing front disc pads


  1. Step 1 Remove ½ of the brake fluid from the master cylinder with the syringe and replace the cover. Discard the fluid.
  2. Step 2
  3. Remove the front hubcaps and loosen the wheel nuts using the lug wrench, but do not remove the nuts.
  4. Step 3 Lift the front end of the LeSabre with the floor jack and secure safely onto the jack stands.
  5. Step 4 Remove the wheel nuts and wheels. Screw one wheel nut back onto a wheel stud hand tight to retain the rotor away from the caliper assembly.
  6. Step 5 Place a large C-clamp over the left inboard caliper housing and the outboard pad, and tighten to compress the caliper piston.
  7. Step 6 Remove the two caliper guide bolts using a box end wrench. Remove the caliper and secure it to the vehicle chassis with mechanic's wire or a metal hook.
  8. Step 7 Remove the outboard pad from the caliper on the LeSabre first. Pry it off the outboard caliper housing using the screwdriver.
  9. Step 8 Remove the inboard pad by lifting the retaining clips out of the caliper bore.
  10. Step 9 Clean the surface of the caliper bridge that contacts the backing plate of the pads using a wire brush, and apply a thin coat of brake lubricant to the contact points. Be careful not to let the lubricant get onto the rotor.
  11. Step 10 Install the new inboard brake pad and shim into the caliper piston bore by pressing the retaining clips into the bore until it locks into place.
  12. Step 11 Install the outboard pad onto the caliper housing, making sure to align the retaining clips into the holes in the caliper. Use the screwdriver to convince the clips onto the caliper if necessary.
  13. Step 12 Replace the caliper over the rotor.
  14. Step 13 Clean off the surface of the guide bolts and apply a light coat of lubricant to the smooth surface of them. Align them properly through the rubber boots and bolt the caliper to the knuckle. Tighten the guide bolts using the wrench. Remove the wheel nut from the wheel stud securing the rotor.
  15. Step 14 Replace the wheel and wheel nuts. Tighten the wheel nuts snugly, and re-tighten them (with a torque wrench is recommended set at 100 foot pounds) once the LeSabre is back on the ground.
  16. Step 15 Repeat steps 5 through 14 for the right side.
  17. Step 16 Pump the brake pedal when you're through to seat the new pads against the rotors, then check and add new brake fluid to the master cylinder.

Jul 16, 2009 | 1998 Mitsubishi Mirage

3 Answers

Saturn Sl1 1998 Front Barke Rotors and Barke Pads


It's not that hard to replace, but there are some tools that your going to have to buy. If there is a Auto Zone in you're area, you can buy the brake pads and may be a new brake rotor if they look to worn out. The rotors are not that expensive any more. They also have the right tools to buy or you can use there tool loner program to get the job done and they have the step by step instructions to replacing the break pads. If you like you can log on to AutoZone.com and look up the instructions to replacing the brake pads on your car. Good luck and hope this helps. Keep me posted, be glad to help.

Jun 16, 2009 | 1998 Saturn SL

2 Answers

Front brakes


http://www.cockeyed.com/lessons/brakeshoes/brakeshoes01.shtml


There is a link to a site that gives you step by step instructions... with pictures... hope this helps :)

Jun 03, 2009 | 2005 Ford F-150

1 Answer

Front Brake Pad Change 2002 Honda Civic


Maybe this is a multiple post. The best available no charge is autozone. com When you go to the site, input your vehicle information and go to vehicle repair guides. They have step by step instructions and exploded views. Once you do the brakes a time or two it will be a snap. Hope this helps.

Mar 07, 2009 | 2002 Honda Civic

1 Answer

Brake pad replacement problems


get haynes repair manual.dont cost much .it got pictures .and it show you step by step .to change front disc brakes.

Jan 16, 2009 | 1999 Kia Sportage

Not finding what you are looking for?
2006 Chrysler Pacifica Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...